• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.4
• /
• pp.67-82
• /
• 1970

In this paper, formulas are developed for computing induced line voltages incommunication lines due to power line failure. Formulas are expressed in terms of fault current, mutual impedance andlength of line. Computed results are shown for various power line valtages and length of line. (Computation is done by IBM 1130-3B Computer system at Soong Sil Compute Center)

• International Journal of CAD/CAM
• /
• v.2 no.1
• /
• pp.23-28
• /
• 2002

This paper presents an efficient line-offset algorithm for general polygonal shapes with islands. A developed sweep-line algorithm (SL) is introduced to find all self-intersection points accurately and quickly. The previous work is limited to handle polygons that having no line-segments in parallel to sweep-line directions. The proposed algorithm has been implemented in Visual C++ and applied to offset point sequence curves, which contain several islands.

• Asia Marketing Journal
• /
• v.4 no.1
• /
• pp.101-115
• /
• 2002

현재 국내외의 많은 기업들이 고객과의 효율적인 커뮤니케이션을 위해 IMC 전략을 수립하고 있으며, 최근에는 인터넷 기술과 합쳐져 IMC 전략의 효율성 증대에 많은 변화를 가져오고 있다. 본 연구에서는 국내 주택시장에서 두산건설과 인터넷 패션전문업체인 웹넷코리아가 공동으로 We've 아파트 분양과정에서 시행된 on-line과 off-line 판매촉진의 통합적 활용과정과 성과에 대해 설명하였다. Off-line 행사와 함께 진행된 3차례에 걸친 판촉행사는 site traffic 증대, 판촉행사 참여, 그리고 분양현장으로의 고객유인과 구매에 이르기까지 높은 성과를 거둔 것으로 나타났다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.862-877
• /
• 2008

In this paper, two types of wideband 3-dB ring hybrids are compared and discussed to show the ring hybrid with a set of coupled-line sections better. However, the better one still has a realization problem that perfect matching can be achieved only with -3 dB coupling power. To solve the problem, a set of coupled-line sections with two shorts is synthesized using one- and two-port equivalent circuits and design equations are derived to have perfect matching, regardless of the coupling power. Based on the design equations, a modified ${\Pi}-type$ of transmission-line equivalent circuit is newly suggested. It consists of coupled-line sections with two shorts and two open stubs and can be used to reduce a transmission-line section, especially when its electrical length is greater than ${\pi}$. Therefore, the $3\;{\lambda}/4$ transmission-line section of a conventional ring hybrid can be reduced to less than ${\pi}/2$. To verify the modified ${\Pi}-type$ of transmission- line equivalent circuit, two kinds of simulations are carried out; one is fixing the electrical length of the coupled-line sections and the other fixing its coupling coefficient. The simulation results show that the bandwidths of resulting small transmission lines are strongly dependent on the coupling power. Using modified and conventional ${\Pi}-types$ of transmission-line equivalent circuits, a small ring hybrid is built and named a compact wideband coupled-line ring hybrid, due to the fact that a set of coupled-line sections is included. One of compact ring hybrids is compared with a conventional ring hybrid and the compared results demonstrate that the bandwidth of a proposed compact ring hybrid is much wider, in spite of being more than three times smaller in size. To test the compact ring hybrids, a microstrip compact ring hybrid, whose total transmission-line length is $220^{\circ}$, is fabricated and measured. The measured power divisions($S_{21}$, $S_{41}$, $S_{23}$ and $S_{43}$) are -2.78 dB, -3.34 dB, -2.8 dB and -3.2 dB, respectively at a design center frequency of 2 GHz, matching and isolation less than -20 dB in more than 20 % fractional bandwidth.

• Bulletin of the Korean Mathematical Society
• /
• v.39 no.1
• /
• pp.175-184
• /
• 2002

A Cellular embedding of a graph G into an orientable surface S can be considered as a cellular decomposition of S into 0-cells, 1-cells and 2-cells and vise versa, in which 0-cells and 1-cells form a graph G and this decomposition of S is called a map in S with underlying graph G. For a map M with underlying graph G, we define a natural rotation on the line graph of the graph G and we introduce the line map for M. we find that genus of the supporting surface of the line map for a map and we give a characterization for the line map to be embedded in the sphere. Moreover we show that the line map for any life of a map M is map-isomorphic to a lift of the line map for M.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.305-308
• /
• 1997

The on-line calculation method is developed to obtain the temperature trajectory that brings the reactants to the desired state in batch styrene polymerization reactor. The temperature trajectory is obtained by applying the moments of the polymer concentration to the 2-step calculation method. The computer simulation is also carried out to verify the superiority of the on-line method to the off-line one. When a temperature disturbance of constant size is introduced, the off-line results shows considerable deviation from the target degree of polymerization. The on-line strategy set up a new trajectory to reach the desired state by using the current state of the reactor. Therefore, the on-line strategy deals with the changes of the system more adequately than the off-line strategy.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.141-143
• /
• 2004

This paper represents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employed the concept of self-consistency. We carry out the experiment of 3D line extraction using synthetic images generated from Avenches data set of Ascona aerial images.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.31-38
• /
• 2003

Line heating is an effective and economical process for forming flat metal plates into three-dimensional shapes for plating of ships. Because the nature of the line heating process is a transient thermal process, followed by a thermo elastic plastic stress field, predicting deformed shapes of plate is very difficult and complex problem. In this paper, neural network model o3r solving the inverse problem of metal forming is proposed. The backpropagation neural network systems for determining line-heating positions from object shape of plate are reported in this paper. Two cases of the network are constructed-the first case has 18 lines which have different positions and directions and the second case has 10 parallel heating lines. The input data are vertical displacements of plate and the output data are selected heating lines. The train sets of neural network are obtained by using an analytical solution that predicts plate deformations in line heating process. This method shows the feasibility that the neural network can be used to determine the heating-line positions in line heating process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.330-335
• /
• 2008

In this study, highly miniaturized short-wavelength transmission line employing periodically perforated ground metal (PPGM) structures were developed for application to miniaturized on-chip passive component on Si RFIC. The transmission line employing PPGM structure showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PPGM structure was 57% of the conventional coplanar-type transmission line on Si Radio Frequency Integrated Circuit (RFIC) substrate. Basic characteristics of the transmission line employing PPGM structure were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components. According to the results, it was found that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.196-200
• /
• 2006

인터넷의 보급으로 인해 Tele Marketing과 Direct Marketing을 주로 하던 보험업의 시장 환경은 on-line판매라는 새로운 판매 채널을 크게 변하였다. 보험업의 경우 인터넷의 도입으로 인해 보험소비자는 가격 및 상품 정보를 보다 쉽게 획득할 수 있고, 비교 견적을 통하여 자신에게 보다 합리적인 의사결정을 할 수 있다. On-line 환경의 급진전에 따른 자동차 보험시장에서 후발주자에 해당하는 on-line 자동차 보험 회사의 급격한 고객 확대는 주목할 변화이다. 따라서 off-line 보험시장을 대체할 수 있는 on-line 보험의 성장 가능성 예측이 중요하다. 본 연구에서는 on-line 자동차 보험사에 대한 분석과 통계자료를 바탕으로 시스템 다이내믹스 기법을 이용하여 on-line 자동차 보험의 성장에 대해 분석 해 보았다.