• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.36-44
• /
• 2000

X-선 사진식각공정(이하 LIGA 기술이라 함)을 이용한 초소형, 초정밀 금형 및 3차원 구조물 제작 가공기술은, 생산기반 기술 중 금형기술 및 가공기술 분야에 해당하는 기술로 포항가속기와 같은 방사선 가속기에서 생성되는 수 보대 파장의 X-선을 이용하는 기술이다. 짧은 파장을 사용하는 연유로, 일반 반도체 공정으로는 실현할 수 없는 높고, 광학적 용도까지 가능한 거울정도의 벽면 거칠기(수백${\AA}$이하)를, 그러면서도 서브 마이크론의 정밀도 (1$\mu\textrm{m}$이하)를 가지는 금형 및 3차원 구조물을 일괄 가공할 수 있는 기술이다.(중략)

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.383-386
• /
• 2007

In this study, the analysis was carried out for Electrical Discharge Machining (EDM) characteristics of the Cu electrodes by LIGA process. The shape of electrodes has 324 pins for the cavity of BGA(Ball Grid Array) type test socket mold. BGA test sockets are used in the inspection process of the semi-conductor I.C chip manufacturing. In the work, the machining performance for EDM of the electrodes was analyzed on dimensional accuracy and wear rate. The dimensional accuracy was measured for dimension of the pins, pitch size between the pins and the roundness of corner edge using optical measuring machine.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2221-2223
• /
• 2000

본 연구에서는 새로운 개념의 초정밀 가공기술인 LIGA 기술(이하 X-선 가공기술이라 함)을 이용하여 정밀 격벽(barrier ribs) 성형용 Ni 금형을 제작하였다. 먼저 X-ray 투과도가 우수하며 내구성 및 기계적 강도가 뛰어난 새로운 재질의 graphite X-선 마스크를 제작하였으며 한정된 단위면적의 X-선 마스크를 이용하여 X-선 노광 면적을 최대화 할 수 있는 새로운 X-선 exposure 기술을 개발하였다. 제작된 barrier ribs 성형용 초정밀 금형의 전체 size는 170mm X 130mm이며 pitch 간격은 110/55${\mu}m$ $\pm$ 0.7${\mu}m$ 이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.134-134
• /
• 2004

LCD-BLU의 고효율 광특성을 유도하기 위한 도광판의 초미세패턴 형상가공기술, 미세사출성형기술과 미세형상패턴 광학해석기술 및 전광특성 측정 및 보완기술이 요구된다. 이러한 기술들을 바탕으로 LCD-BLU의 고단가의 주요요인인 기능성 광학 sheet(prism sheet 등)를 연차적으로 제거 및 도광판에 기능을 결합하는 기술개발이 본 연구의 목적이다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.1043-1046
• /
• 2000

By combination of X-ray lithography, electroplating and molding process, various microstructures have been produced. Specially, the alignment grooves for multi-fibers with submicron accuracy have been produced. This paper described a fabrication process of LICA molds and micro molding technique by using LIGA molds. The accuracy of the fabricated LIGA molds was less than 0.4${\mu}{\textrm}{m}$. The injection molded alignment grooves were very precise and had me surface roughness so that they could be successfully applicable to optical systems.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.2
• /
• pp.132-139
• /
• 2000

This paper reports a novel micromachining process based on UV-LIGA process and (110) silicon anisotropic etching for fabrication of a high-aspect-ratio comb actuator. The comb electrodes are fabricated by (110) SILICON comb structure considering the etch-rate-ratio between (110) and (111) planes and lateral etch rate of a beam-type structure. The fabricated structure was$ 400\mum \; thick\; and\; 18\mum$ wide comb electrodes separated by $7\mim$ so that the height-gap ratio was about 57. Also considering resonant frequency of the comb actuator and the frequency-matching between sensing and driving mode for gyroscope application, we designed the number, width, height and length of the spring structures. Electroplated gold springs on both sides of the seismic mass were $15\mum\; wide,\; 14\mum\; thick\; and \; 500\mum$ long. The fabricated comb actuator had resonant frequency ay 1430Hz, which was calculated to be 1441Hz. The proposed fabrication process can be applicable to the fabrication of a high-aspect-ratio comb actuator for a large displacement actuator and precision sensors. Moreover, this combined process enables to fabricate a more complex structure which cannot be fabricate only by surface or bulk micromachining.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.11a
• /
• pp.249-254
• /
• 2004

광의 효율적 사용을 위해 표면에 마이크로 그루브가 새겨진 고성능 광학 부품의 개발이 활발하고, 이들 부품의 다량 생산을 위한 초정밀 금형제조기술이 각광을 받고 있다. 최근의 초정밀 미세 기계가공의 경우 간단한 공정으로 이러한 마이크로 그루브 금형을 제작할 수 있다. 특히 조명각 변조용 렌티큘러 렌즈와 같이 실린더형 그루브 금형의 경우에는 기존의 Lithography, MEMS, LIGA 등 광 에너지를 이용한 다른 제조방법들에서는 가공하기 어려운 점이 있으나, 기계가공에서는 쉽게 제작가능한 장점이 있다. 본 연구에서는 이러한 미세기계가공기술의 장점을 활용하여 U 형 마이크로 그루브를 가진 Lenticular 렌즈용 금형을 가공하고자 하였다. 가공에는 3 축 구동의 초정밀 미세 복합가공기와 단결정 천연 다이아몬드공구가 사용되었고, 가공방식은 마이크로 세이핑 공정을 적용하였으며, 가공 금형 재료에는 Brass와 무전해 Nickel이 사용되었다. 실험을 통하여 금형가공시의 절삭력, 칩 형상, 가공표면 등의 분석이 수행되었으며 이를 기반으로 여러 가지 가공문제점을 해결하고, 최종적으로 양호한 렌티큘러렌즈용 금형을 가공하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.253-259
• /
• 2002

Micro cell structures with high aspect ratio were fabricated by injection molding method. The mold inserts had dimension $1.9cm\times8.3cm$ composed of a lot of micro posts and were fabricated by LIGA process. The size of the micro posts was $157{\mu}m\times157{\mu}m\times500{\mu}m$ and the gaps between two adjacent posts were $50{\mu}m$. Using Polymethylmethacrylate (PMMA) injection molding was performed. The key experimental variables were temperature, pressure, and time. By controlling these, good shaped mim cell structures with $50{\mu}m$ in wall thickness and $500{\mu}m$ in depth were obtained. In order to understand micro molding mechanism, shape changes of molded PMMA were studied with experimental variables. And the durability of mold insert was investigated, too. The results show that the most important factor in molding processes was the mold temperature that is closely related to the filling of the melt into the micro cavity. And the holding time before cooling showed a great effect on the quality of molded PMMA.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.934-937
• /
• 2001

It is well-known that the micro fabrication technology of micro parts are the high energy beam or silicon-based micro machining method such as LIGA Process, Laser machining, photolithography and etching technology. But, for fabricating complex 3-D structure it is better to use mechanical machining. This machining method by the mechanical machine tool with nanometer accuracy is getting attention in some field-especially micro optics machining such as grating, holographic lens, micro lens array, fresnel lens, encoder disk etc.. In this study, we survey the micro fabrication by mechanical cutting method and set up the mechanical micro machining system. And we carried out micro cutting experiments for micro parts with v-shape groove.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.312-320
• /
• 2003

The basic mechanistic aspects of the interaction and practical considerations related to polymer ablation were briefly reviewed. Photochemical and photothermal effects, which highly depend on laser wavelength have close correlation with each other. In this study, multi-scanning laser ablation processing of polymer with a DPSS (Diode Pumped Solid State) 3rd harmonic Nd:YVO$_4$ laser (355 nm) was developed to fabricate a three-dimensional micro shape. Polymer fabrication using DPSSL has some advantages compared with the conventional polymer ablation process using KrF and ArF laser with 248 nm and 193 nm wavelength. These advantages include pumping efficiency and low maintenance cost. And this method also makes it possible to fabricate 2D patterns or 3D shapes rapidly and cheaply because CAD/CAM software and precision stages are used without complex projection mask techniques. Photomachinability of polymer is highly influenced by laser wavelength and by the polymer's own chemical structure. So the optical characteristics of polymers for a 355 nm laser source is investigated experimentally and theoretically. The photophysical and photochemical parameters such as laser fluence, focusing position, and ambient gas were considered to reduce the plume effect which re-deposits debris on the surface of substrate. These phenomena affect the surface roughness and even induce delamination around the ablation site. Thus, the process parameters were tuned to optimize for gaining precision surface shape and quality. This maskless direct photomachining technology using DPSSL could be expected to manufacture tile prototype of micro devices and molds for the laser-LIGA process.