• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.273-276
• /
• 2007

In this study, we generated DSM(Digital Surface Model)s and orthophotos with both LIDAR data and scanned aerial photos and compared them with those generated from only the scanned photos. We checked the relief displacements of buildings appearing in the generated orthophotos, where the displacement should not be exist in a true-orthophoto. The RMSE of the relief displacement in the orthophoto generated using a LIDAR DSM is 3 m while the RMSE in the orthophotos from a DSM based on the image matching is 6.1 m. It was revealed that the orthophoto from a LIDAR DSM are closer to a true-orthophoto. But the results in the accuracy test and similarity evaluation of the generated orthophotos were contrary to former results because the roof texture of buildings were expanded to occlusion areas around the buildings. With the central area of the photo, we can generate sufficiently accurate true-orthophotos using a LIDAR DSM.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.93-96
• /
• 2007

LIDAR is a relatively new technological tool that can be used to accurately georeference terrain features, and also is becoming an important 3D mapping tool in GIS. In this study it is described the capabilities of terrestrial LIDAR that was used to build a 3D terrain model of extremely steep rock face, along with the useful data and examples of contributions terrestrial lidar has made to outcrop studies. For this, High-resolution terrestrial lidar acquisition, processing, interpretation are discussed and applied to mapping of geological surfaces in three dimensions. We expected that lidar is a tool with which we can improve our current field methods and quantify the observations geologists make.

• 한국대기환경학회지
• /
• 제25권5호
• /
• pp.450-458
• /
• 2009

The range-dependent overlap factor of a lidar system can be determined experimentally if a Raman backscatter signal by molecule is measured in addition to the usually observed elastic backscatter signal, which consists of a molecular component and a particle component. The direct determination of the overlap profile is presented and applied to a lidar measurement according to variation of telescope field-of-view and distance between telescope and transmitting laser. The retrieval of extinction coefficient by Raman method can generate high errors for heights below planetary boundary layer if the overlap effect is ignored. The overlap correction method presented here has been successfully applied to experimental data obtained in Gwangju, Korea.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2005년도 GIS/RS 공동 춘계학술대회
• /
• pp.355-361
• /
• 2005

3차원 자료의 필요에 발맞추어 3차원 좌표를 직접적으로 획득할 수 있는 LIDAR 시스템이 등장하게 되었다 항공 LIDAR 시스템은 항공기, GPS, INS, Laser Scanner가 통합된 시스템으로 항공기에서 발사된 Laser의 반사파를 이용하여 거리와 그 때의 항공기의 자세, 위치를 통합하여 직접적인 3차원 포인트 자료를 획득할 수 있다. LiDAR 데이터는 지형, 건물, 식생 등의 지면위에 있는 모든 객체에 대한 3차원 자료와 영상자료를 함께 제공하고 있다. 이러한 LIDAR 자료로부터 DEM, DTM 등의 지형 정보와 식목, 건물 등 지물정보를 추출하는 연구가 활발하게 이루어지고 있다. 본 연구에서는 지형을 추출하는데 사용할 수 있는 몇 가지 필터링기법을 선정하여 국내의 다양한 지모, 지물에 적용하고 그 정확도를 평가해 보았다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.223-228
• /
• 2006

Monitoring structures is important to maintain the safety and serviceability of the structures. The maximum displacement in the structure should be precisely and frequently monitored because it is a direct assessment index indicating its stiffness. However, no practical method has been developed to monitor such displacement precisely, particularly for high-rise buildings and long span bridges because they cannot be easily accessible. To overcome such difficult accessibility, we propose to use a LIDAR system that remotely samples the surface of an object using laser pulses and generates the coordinates of numerous points on the surface. By analyzing the LIDAR points sampled from the surfaces of a deformed structure, we can precisely determine the displacement of the structure. In this study, we thus develop a novel method based the LIDAR system and perform an indoor experiment to prove its performance. This experimental results strongly supports that the displacement measurement using the LIDAR system are enough accurate to be used for structural analyses.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.533-540
• /
• 2006

In recent years, civil-engineering work is desired the terrain information to be more efficient in earthwork volume calculation. One method for collecting elevation data is LiDAR. Lidar data was used to produce rapidly an accurate digital elevation model of the terrain, compared with the conventional ground surveys, photogrammetty, and remote sensing. Raw Lidar data is combined with GPS positional data to georeference the data sets. Lidar data is edited and processed to generate surface models, elevation models, and contours. Here we can either create a Tin Volume Surface or a Gird Volume Surface. Triangulated Irregular Network(TIN) has complex data structure, but it can describe well terrain surface features. As we have seen, we search the efficiency for earthwork volume calculation using Lidar data. One conclusion we can draw from this study is that Lidar data is more accurate result than digital map in the calculation of earthwork volume.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.522-525
• /
• 2005

Light detection and ranging (LIDAR) is one of the effective technologies for monitoring forest inventory, and importance of forestry is increasing because of its function as the sink of green house gases (GHG). This study aims at development of a methodology for better and more accurate estimation of physical parameters of individual trees by removing sudden drops of LIDAR data within a crown. Our study area is located in Aomori prefecture, the northern part of Honshu Island, with the dominant species of Japanese cedar. The results show practicality of our method in the usage of LIDAR data in the field of forest inventory.

• 한국방재학회 논문집
• /
• 제4권4호
• /
• pp.55-61
• /
• 2004

최근 센서 기술의 발달로 지상에 대한 다양한 정보취득이 가능해지고 있다. 하지만, 이러한 정보들을 많은 응용연구에 적용시킬 경우 각 센서로부터 취득한 자료들은 완벽성, 정밀성 및 일관성이 부족하다. 이러한 문제를 해결하기 위하여 각 자료는 서로 다른 자료를 위한 보조자료로 활용되거나 서로 간의 융합을 필요로 한다. 본 연구에서는 LIDAR자료와 디지털 카메라 영상을 이용하여 3차원 정사영상을 생성하시 위한 실험을 수행하였으며 3차원 정사영상이 홍수 모니터링에 활용될 수 있었음을 보여주었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.501-504
• /
• 2009

In order to investigate of possibility for developing urban wind power, wind profile and wind power density are estimated using Sodar and Lidar based on surface. Since poor performance of Sodar and Lidar are often shown in a paticular meteorological condition, inter-comparison and validation with radio-sonde for each of instruments are performed. As a result, Lidar shows a good performance and wind data from Lidar are used to analyze wind profile and wind power density. It can be found that a wind power system mounted tall building in urban area is very attractive.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.773-775
• /
• 2003

From the view point of data fusion, we integrate LIDAR data and digital aerial images to perform 3D building modeling in this study. The proposed scheme comprises two major parts: (1) building block extraction and (2) building model reconstruction. In the first step, height differences are analyzed to detect the above ground areas. Color analysis is then performed for the exclusion of tree areas. Potential building blocks are selected first followed by the refinement of building areas. In the second step, through edge detection and extracting the height information from LIDAR data, accurate 3D edges in object space is calculated. The accurate 3D edges are combined with the already developed SMS method for building modeling. LIDAR data acquired by Leica ALS 40 in Hsin-Chu Science-based Industrial Park of north Taiwan will be used in the test.