• 한국광학회지
• /
• 제21권2호
• /
• pp.53-60
• /
• 2010

본 논문에서는 휴대전화용 백라이트 유닛의 광학시트를 줄이면서도 휘도와 휘도균일도 및 시야각을 유지하기 위한 복합 도광판을 설계하고 가공하였다. 복합 도광판의 패턴은 가공성을 고려하여 윗면에는 마이크로 급의 프리즘 패턴을 형성하고 아랫면은 나노 및 마이크로 급의 크기가 다른 두 개의 음각 프리즘 패턴을 형성하였다. 이러한 패턴 형상은 금형 코어를 이용한 사출성형을 통해 복합 도광판의 가공성을 확인하였다. 특히 최적화된 복합 도광판은 프리즘 시트 한 장만을 채용하여 통상적인 백라이트 유닛과 유사한 휘도 4560 cd/$m^2$, 휘도균일도 83%, 수직 시야각 $60^{\circ}$, 수평 시야각 $56^{\circ}$라는 성과를 얻을 수 있었다. 결과적으로 도광판의 윗면과 아랫면에 복합 패턴들을 형성함으로써 기존의 백라이트 유닛에서 확산시트 및 프리즘시트 1장을 제거하여 BLU에 적용될 수 있음을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.527-528
• /
• 2006

• 소성∙가공
• /
• 제16권1호
• /
• pp.42-47
• /
• 2007

LCD-BLU is one of kernel parts of LCD and it consists of several optical sheets: LGP, light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50\sim300{\mu}m$ diameter on the surface. But the surface of the etched dots of LGP is very rough due to the characteristics of the etching process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched dot patterned LGP, optical pattern with continuous microlens was designed using optical simulation CAE. Also, a mold with continuous micro-lens was fabricated by UV-LiGA reflow process and applied to 7 inch size of navigator LCD-BLU in the present study.

• 소성∙가공
• /
• 제20권1호
• /
• pp.60-63
• /
• 2011

BLU(back light unit) is one of kernel parts of LCD(liquid crystal display) unit. New 3-D micro-lens pattern for LGP(light guide plate), one of the most important parts of LCD-BLU, had been researched. Instead of dot pattern made by chemical etching or laser ablation, SCS(slanted curved surface) micro-lens pattern was designed with optical CAE simulation. This study introduce the method of design using optical CAE simulation for SCS micro-lens, the new fabrication method of micro-mold with SCS micro-lens pattern.

• Korea-Australia Rheology Journal
• /
• 제19권3호
• /
• pp.171-176
• /
• 2007

LCD-BLU (Liquid Crystal Display-Back Light Unit) of medium size is usually manufactured by forming numerous dots with $50{\sim}300\;{\mu}m$ in diameter by etching process and V-grove shape with $50\;{\mu}m$ in height by mechanical cutting process. However, the surface of the etched dots is very rough due to the characteristics of the etching process and V-cutting needs rather high cost. Instead of existing optical pattern made by etching and mechanical cutting, 3-dimensional continuous micro-lens of $200\;{\mu}m$ in diameter was applied in the present study. The continuous micro-lens pattern fabricated by modified LIGA with thermal reflow process was tested to this new optical design of LGP. The manufacturing process using LIGA-reflow is made up of three stages as follows: (i) the stage of lithography, (ii) the stage of thermal reflow process and (iii) the stage of electroplating. The continuous micro-lens patterned LGP was fabricated with injection molding and its test results showed the possibility of commercial use in the future.

• 소성∙가공
• /
• 제23권1호
• /
• pp.41-48
• /
• 2014

The light guide plate has become the major component for the backlight module in general information technology products (e.g. mobile phones, monitors, etc.). High speed injection molding has been adopted for thin walled LGP giving advantages such as weight, shape, size, and reduction in production costs. In the current study, the rheological characteristics of high liquidity plastic resin PC(HL8000) were measured using a capillary rheometer to improve the reliability of the numerical analysis for high speed injection molding. With the measured viscosity and PVT of PC(HL8000), numerical analysis of injection molding was conducted using the simulation software(Moldflow). Filling time and deflection were predicted and compared with those of traditional PC resins(H3000, H4000). The results show that PC(HL8000) has significantly different rheological characteristics during high speed injection molding. Hence proper properties of the resin should be used to improve the accuracy of numerical predictions.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.20-24
• /
• 2015

Recently, the light guide plate (LGP), a component of the BLU, becomes thinner and larger than ever. In industrial field, specialized injection molding technique is applied to mold the ultra-thin LGP such as a ultra-high speed injection molding. Usually very high melt temperature is used for low viscosity. High injection speed and melt temperature lead to yellowing of LGP. In the present paper a series of injection molding experiment was performed under various injection molding conditions. Yellow index, CIE xy, spectral transmittance of sample were measured using the UV-Visible spectrophotometer. Systematic decrease of spectral transmittance in UV-B range was found as the melt temperature was higher. Yellow index and CIE xy were became higher near the gate location in LGP. From the result of analysis of variance, the main factor to affect for yellow index was mold temperature and that for spectral transmittance(at 315 nm) was melt temperature.

• 한국광학회지
• /
• 제21권2호
• /
• pp.61-68
• /
• 2010

최근 LED TV로 각광받고 있는 대형 LCD TV용 LED(Light Emitting Diode, 고체발광다이오드) 백라이트에 사용되는 도광판의 광구조를 최적화하여 LED에 의해 발생하는 휘점을 제거하고 조도균일도를 향상시키기 위한 시뮬레이션 연구를 진행하였다. 시뮬레이션 모델로 설정된 엣지형 백라이트는 LCD TV용으로 사용될 수 있는 두께 3 mm의 도광판, 측면에 배치된 세 개의 백색 LED와 램프 커버, 도광판의 하면에 배치된 반사 필름으로 구성되어 있다. 일반적인 엣지형 백라이트용 도광판과 같이 도광판의 입광면에 패턴이 형성되어 있지 않은 경우에는 도광판 상면의 조도균일도가 입광면과 LED 사이의 거리에 민감하게 의존하였다. 입광면과 LED 사이의 거리가 커질수록 조도균일도는 개선되다가 일정 거리 이상이 되면 개선이 둔화되는 경향성을 보였다. 반면에 도광판의 입광면에 렌티큘라(lenticular) 렌즈 배열이나 톱니모양(Serration)과 같은 미세 굴절 패턴을 형성하는 경우 LED가 입광면에 거의 붙어 있는 경우에도 패턴이 없는 경우에 비해 우수한 조도균일도를 보인다는 것을 알 수 있었고 조도균일도가 LED와 입광면 사이의 거리에 의존하는 정도가 줄어든다는 점도 확인하였다. 동일조건에서는 톱니모양 패턴이 렌티큘라 렌즈에 비해 우수한 조도균일도를 나타내었고 굴절률의 변화를 통해 추가적인 균일도 개선 효과를 얻을 수 있음도 확인하였다. 따라서 도광판의 입광면에 굴절 기능을 가지는 미세 패턴을 형성하고 그 광구조를 최적화하는 것은 LED에 의한 휘점 형성을 억제하고 LCD 측면의 비발광영역(베젤)을 줄이는데 있어서 매우 효과적인 방법이 될 수 있다는 것을 확인하였다.

• 소성∙가공
• /
• 제20권1호
• /
• pp.5-10
• /
• 2011

The main objective of the present study is to predict the process window of injection-compression molding corresponding to the capability of an injection machine for fabricating 7 inch LGP. The open distance and volume filled after injection stage were found to be two important factors that affect critical requirements such as flow length, injection pressure and clamping force for the process. Process window for the key factors was also predicted by response surface method. As a result, predicted process window for open distance and volume filled after injection stage satisfying the critical requirement with a given injection machine was in the range of 60 ~ 75%, and 104.00 ~ 104.25%, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1503-1506
• /
• 2005

This dissertation represents method concerning high performance prism LGP design in 17 inch TFT-LCD. By means of developing LGP with total size of 8mm that has prism on both upper side and bottom side, it is superior to previous printing way in gaining high brightness. It can realize actual material simulation on prism LGP production using 17inch injection process and about 20% luminance enhancement is achieved based on such method.