• 전기학회논문지P
• /
• 제61권2호
• /
• pp.93-96
• /
• 2012

We have designed high performance prism light-guide plate (LGP) in 17 inch TFT-LCD. In test result to embody high brightness BLU in case of LGP of base and upper surface with 17 inch, thickness 8mm adding prism construct. Using optical simulation, we forecast the brightness and uniformity in LGP with prism structure. And we adopted novel injection mold method and Nickel stamper to make actual evolution sample. Novel injection mold process has steady heating time zone in heat cycle time of injection mold process. For this novel heat cycle control, we achieved above 90[%] height prism structure as our design. It is superior brightness improvement than previous that of printing form about some 20[%] and in this course to embody actual material it succeeded prism LGP production by 17 inch injection form process.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.38-44
• /
• 2008

Light guide plate is one of most important components which are composed of back light unit, affecting the quality and performance of LCD. Average brightness and uniformity are especially key factors for designing the light guide unit. These qualities are affected and controlled by the pattern being attached to the back of light guide unit. In order to obtain high brightness and uniformity the optimized pattern design is adopted for LGP. In this study, optimized molding condition for LGP with 0.4 mm thickness was obtained by using the Moldflow simulation software and the optimized pattern for better brightness uniformity was designed for the thickness of the 0.4 mm by trial and error method. The brightness was measured for the different LGP thicknesses and the residual stress analysis was performed for 0.4 mmthickness by the photoelasticity and the results are compared with 0.5 mm, 0.6 mm thickness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1609-1612
• /
• 2005

The effects of injection molding conditions on the uniformity and brightness of light guide plate(LGP) with micro-patterns were investigated in the present study. An injection molding system for stampers with mirco-pattern was designed and manufactured to perform experiment. Variations of injection molding speed, mold and melt temperature for LGP were considered in this work. Also, injection molding characteristics of LGP were investigated by numerical analysis using plastic injection molding commercial code. It was shown that injection molding conditions such as injection speed, melt temperature and mold temperature can have an effect on the uniformity and brightness of light guide plate.

• Journal of Information Display
• /
• 제12권1호
• /
• pp.23-27
• /
• 2011

The correlation between the temporal and spatial variations of the elastic constant and temperature change was examined for a light guide plate (LGP) adopted in the edge-lit light-emitting-diode backlight for mobile applications, using the micro- Brillouin light scattering method. The velocity of sound and the elastic constant $C_{11}$ of an LGP made from bisphenol-A polycarbonate (PC) were investigated as functions of temperature, time, and position on the LGP. The temporal variation of $C_{11}$ exhibited an exponential decay, while the spatial variation of $C_{11}$ reflected the temperature distribution on the LGP. The glass transition temperature of the PC LGP was found to be located at $155^{\circ}C$. The result showed that systematic transformation between the elastic property and the temperature is possible and that the temperature distribution on the bulk LGP can be accurately probed via the present experiment method, without using any special temperature measurement equipment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.165-168
• /
• 2004

We have analyzed the cause of black "mura" and measured it in prism light-guide plate (LGP). Properties of components used in a back light. unit (BLU) have changed by Simulation Tool. We get major factor of black "mura" for improvement in prism LGP. For the improvement of black "mura", removal of brightness "mura" at input light part must precede preferentially because of reflection characteristics of the prism LGP. Removal of brightness "mura" is improved by changing of input light part in LGP and dispersion treatment.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.310-314
• /
• 2015

To improve the optical performance of the backlight unit with light guide plate(LGP), we investigated the effects of LGP patterns on the brightness and viewing angles properties of the backlight unit. We designed several patterns of LGP and calculated their optical properties by the optical simulation. The results reveal that the highest brightness and wide viewing angle was achieved with the extended-closed-polygon diffusion pattern and upper triangle prism pattern of the LGP.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.51-54
• /
• 2005

Light Guide Plate (LGP) of LCD-BLU(Back Light Unit) is manufactured by forming optical pattern with $5\~100um$ in diameter on the LGP by means of sand blasting or etching method. However, in order to improve the luminance of LCD-LGP, the design of optical pattern has introduced UV inclined-exposure process in this study. This micro-optical pattern, which has asymmetric elliptical column shaped pattern, can change low viewing-angle to high viewing-angle, as well as it contribute to diffusion of light. As a result, this type of micro-optical pattern can introduce the highly luminance. The PR structure obtained in the stage of lithography has asymmetric elliptical column shape and it is processed into a micro-optical pattern. Optical design with this kind of micro-optical pattern, mold fabrication by electroplating and LGP molding with injection molding are under way.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.233-238
• /
• 2014

In this paper, in order to achieve slim and light liquid crystal display, we examine the optical conditions that can obtain uniform light with higher optical efficiency over whole light guide plate (LGP) through simulation. Furthermore, to overcome the issues of hot spot in front of red, green, and blue light emitting diodes (RGB LEDs) source and non-uniform color mixing, we propose four shaped color mixing bars tied up with the LGP and check the optical characteristics of the LGP with them by simulation. Consequently, we could know the optical conditions of improving optical efficiency and optical uniformity in the LGP through the optical design. Also we confirmed that the issues of the hot spot and non-uniform color mixing in edge type LED could be solved by using the ${\bigwedge}$-shaped window color mixing bar.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.133-139
• /
• 2011

We have performed optical design of light guide plates (LGPs) for a photobioreactor by using an illumination design tool. An LGP having light emitting diodes (LEDs) as a light source on the four sides was designed by optimizing the distribution of LGP patterns and design of another LGP, on top of which sunlight was focused by a Fresnel lens, was executed. Finally, a hybrid-solar-and-LED-lighting scheme was described. Detailed design process and optical performances of the designed LGPs are presented.

• 정보저장시스템학회논문집
• /
• 제9권1호
• /
• pp.10-16
• /
• 2013

Through the rapid development of LED TV, a large-area edge-lit backlight unit is widely researched in the display industry for enhancing the optical efficiency, luminous uniformity and slim design. In addition, an edge-lit backlight unit includes many optical sheets such as reflection sheet, prism sheet and diffuser sheet. However the function can be replaced by the carefully patterned light guide plate (LGP). Micro patterns which located on the top and bottom surface of light guide plate was designed by ray-tracing optical simulation. The designed patterns improved the light characteristics of LGP, including optical extraction efficiency and intensity distribution uniformity. These results suggest that it is very effective method to design edge-lit LGP with micro-patterns on both sides for large-area display and to reduce the fabrication cost.