• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.470-477
• /
• 2007

This research was conducted to evaluate the effect of moisture content on direct landfilling prohibition of organic sludge. Organic sludges with moisture content (Me) of 75 and 85% were filled in two lysimeters. The lysimeters were named as Exp.75 and Exp.85, respectively. LFG of 2,064 l was generated greatly for Exp.85, compared to 1,500 l for Exp.75. LFG generations in Exp.75 and Exp.85 were 64.1 l/kg and 157.1 l/kg as dry TS basis, and 113.6 l/kg and 266.2 l/kg as dry VS basis. Total $CH_4$ generation in LFG for Exp.85 was 1,238 l, while 1,050 l for Exp.75. $H_2S$ of $3{\sim}150$ ppmv was generated from Exp.85, which was 5 times higher than $2{\sim}30$ppmv from Exp.75. Leachate was not generated from Exp.75 during operation time. However, 420 ml of leachate was generated from Exp.85. From the results of gas generation, composition, odorous compounds, and leachate generation, landfilling of organic sludge with high MC was more harmful to the environment in spite of great LFG generation. However, direct landfilling of organic sludges without great difference of MC made a severe odor problem. Therefore, it was thought that current direct landfilling prohibition law for all organic sludge was appropriate.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.276-285
• /
• 2005

본 과제에서는 참여기업인 두산인프라코어(구 대우종합기계)에서 양산중인 국산디젤엔진을 개조해 가스엔진을 제작하였으며, 두산인프라코어에서 500시간 내구시험을 2차례 실시하였고, 주관기관인 한국기계연구원에서 국산 ECU를 활용하여 도시가스를 연료로 실험을 수행한 후 김포매립지에서 현장 적용실험을 수행하였다. 메탄농도가 46$\sim$56%로 변하는 조건에서 350kW의 출력을 달성하였으며, 삼원촉매를 적용한 결과 2005년 배기규제를 만족하는 결과를 도출하였다. 위탁기관인 전남대에서는 촉매 특성에 관한 실험을 1차년도와 2차년도에 수행하였다. 본 과제에서 개발한 LFG(=매립지가스) 엔진은 국내에서 개발된 최초의 LFG 엔진으로서 쓰레기 매립지 뿐만 아니라 음식물 쓰레기 혐기소화 처리과정, 분뇨나 축분 등의 혐기소화 처리과정, 하수종말 처리장 등에서 발생하는 바이오가스를 이용한 발전 동력원으로 사용될 수 있을 것으로 기대된다.

• Journal of Korea Foundry Society
• /
• v.11 no.1
• /
• pp.44-53
• /
• 1991

The proper feeding conditions for thin Al-Alloy (AA336, JIS AC8A) castings in permanent mold were investigated to eliminate microshrinkage porosity. 5mm-thick plates (200mm long, 60mm wide) were cast with increasing padding taper from 0 to 5% under different conditions : (1) constant mold temperature of $350^{\circ}C$, (2) continuous production with uniform mold thickness (10mm), (3) continuous production with a negative taper of 2.5% in mold thickness (thickness decreasing in direction to riser). The test casting were machined off to the midplane and the shrinkage porosity was examined visually. The critical padding taper which can just eliminate the shrinkage porosity was determined for each condition, i.e. : (1) 4.5% at the constant mold temperature, (2) 3.5% for continuous production with the uniform mold thickness (3) 1.5% for continuous production with the taper in mold thickness. A computer simulation by a finite difference analysis program was applied to the test casting. The liquid fraction gradient (LFG) and the temperature gradient divided by the square root of the cooling rate (G /SR) were calculated at the end of solidification and compared with the shrinkage porosity area in the castings. For the case of constant mold temperature, LFG is a better parameter to predict shrinkage porosity than G /SR and its critical value is around 11%/cm. But for the case of continuous production, neither LFG nor G /SR could be a reliable parameter. The experimental results about the critical padding taper are of practical interest for designing permanent molds and castings. The computer simulation results stimulate further research to be directed on the prediction of centerline microshrinkage porosity in continuous production.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.612-617
• /
• 2007

This research was performed to evaluate the effect of 'Food Wastes (FW) Direct Landfilling Prohibition' on characteristics of landfill gas (LFG) and leachate and the appropriateness of current legislation. Approximately 45% (Exp.45) and 15% (Exp.15) of FW were filled in two lysimeters. During 570 days, 1400 L of LFG was generated from Exp.45%, which was much more than 906 L of Exp.15. There was no significant difference of LFG composition between Exp.15 and Exp.45. 2~30 ppmv of odorous hydrogen sulfide was detected in Exp.45, while 2~7 ppmv was in Exp.15. There was also no significant difference in the leachate generation between the two. On day 570, $BOD_5$ of Exp.45 and Exp.15 were 37000 mg/Land 25630 mg/L and $COD_{Cr}$ of Exp.45 and Exp.15 were 45480 mg/L, 30294 mg/L. TOC of Exp.45 was 2~3 times higher than Exp.15. Higher portion of FW in landfilling increased LFG generation. However, it generated more odor and made the quality of leachate. Therefore, 'FW direct Landfilling Prohibition' was evaluated as an appropriate legislation.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.111-117
• /
• 2021

This research work is to suggest the experimental results capable of solving an initial unsuitability of combustion and environment in a constant volume combustion chamber by using LFG(Land Fill Gas) which consists of 40% CO₂ and 60% CH₄. The experimental condition is set as 0.9~1.6 of air-fuel ratio, 3bar of combustion pressure, 25℃ of room temperature, methane for using gas, and 2.5~4.5 of Pre-chamber hole sizes. As a result, it can be seen that diffusion of initial flame is significantly increased by M3.0 model comparing with other one. The reason for the characteristics is that orifice effect is extremely improved by 0.9, 1.0, and 1.2 of air-fuel ratio comparing with other one. Consequently, this experiment is shown that M3.0 model is partially capable of improving combustion performance than a conventional ignition plug in case of applying to LFG with Pre-chamber design.

• Korean Journal of Cognitive Science
• /
• v.2 no.1
• /
• pp.15-32
• /
• 1990

In the area of natural language processing, a lot of unification-based grammar formalisms have been issued and are highlighted. The core of the formalisms is an unification of feature stutures. But few formal unification methodologies have been developed. Therfore, implementers of the formalisms could not help adopting an ad hoc design strategy for the unification module. In this paper, we suggest an efficient unification methodology using FUL, a programming language whic supports the unification. For the exeample, we will trace the unification processes in LFG and HPSG, the representative unification-based grammar formalisms, with FUL.

• Journal of Urban Science
• /
• v.9 no.1
• /
• pp.69-73
• /
• 2020

Sudokwon landfill("Sudokwon" means regions of Seoul, Kyunggi and Incheon metropolitan cities in Korea), the world's largest sanitary landfill, has been systematically managing statistics on the incoming and dumping wastes and satisfactorily controlling pollutants including leachate and LFG. According to our long time experience of LFG field monitoring, the emission of GHG from landfill estimated by the IPCC Guideline showed much difference with our results. C&D waste has high concentration of sulfate compared to other wastes. Increased C&D waste of dumping waste had changed the COD/sulfate ratio in the landfill, which caused the increase of H₂S gas and the decrease of CH₄ gas. But the IPCC estimation method does not consider the effects of sulfate. In addition to that, the oxidation factor of the cover soil is set to the default values of 0.1 but the measured values by the field monitoring, are showing much higher than that, especially in the closed landfill.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.375-384
• /
• 2007

This paper describes a method for automatic acquisition of wide-coverage treebank-based deep linguistic resources for Japanese, as part of a project on treebank-based induction of multilingual resources in the framework of Lexical-Functional Grammar (LFG). We automatically annotate LFG f-structure functional equations (i.e. labelled dependencies) to the Kyoto Text Corpus version 4.0 (KTC4) (Kurohashi and Nagao 1997) and the output of of Kurohashi-Nagao Parser (KNP) (Kurohashi and Nagao 1998), a dependency parser for Japanese. The original KTC4 and KNP provide unlabelled dependencies. Our method also includes zero pronoun identification. The performance of the f-structure annotation algorithm with zero-pronoun identification for KTC4 is evaluated against a manually-corrected Gold Standard of 500 sentences randomly chosen from KTC4 and results in a pred-only dependency f-score of 94.72%. The parsing experiments on KNP output yield a pred-only dependency f-score of 82.08%.

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.160-160
• /
• 2007

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.219.2-219.2
• /
• 2010

가스하이드레이트(gas hydrate)는 고압과 저온 조건에서 물분자간의 수소결합으로 형성되는 3차원 격자구조에 동공(cavity)이라는 빈 공간이 생기고 이 동공에 가스가 물리적으로 포획되어 생성되는 것으로, 수소결합을 하는 물의 격자(Host) 내에 메탄등의 저분자가스(Guest)가 포획된 결정체이다. 가스 하이드레이트는 미량의 물을 첨가, 가압하면 부피비로 약 200배의 가스를 고상의 형태로 저장할 수 있으며, 열역학적으로 안정된 결정체이기 때문에 하이드레이트로 존재하기 위한 최소한의 온도, 압력조건이 충족되면 고상으로 항구적인 존재가 가능할 수 있어 가스의 수송 및 저장에 높은 경제성을 가지는 방법이다. 현재 운영중인 전국의 242개소 매립지 중에서 발전 및 연료로 활용가능한 조건을 같춘 자원화 대상 매립지는 약 14곳에 불과한 형편이고 이들 중 대부분 시설은 자원화 시설을 운영하고 있으나. 중소규모 매립지에서 발생하는 LFG에 대하여 효율적인 이용 및 처리 방안이 없어 태워 없어지거나 방치하는 등 매립가스를 활용하는 기술은 미흡한 실정이다. 이러한 LFG는 많은 환경적인 문제를 야기하지만, 50vol% 이상의 고농도 메탄이 함유되어 있어 이를 대체에너지원으로 이용할 경우 환경적인 문제를 해결함과 동시에 신재생에너지원으로 활용 가능하다. 본 연구에서는 중소규모 매립지에서 발생하는 LFG를 활용하기 위하여 하이드레이트 형성/해리 Pilot plant의 제작을 통하여 $CH_4$와 $CO_2$(단일, 복합가스의 실험)의 하이드레이트화 연구를 진행 중이다.