• 제목/요약/키워드: LED video modules

검색결과 6건 처리시간 0.024초

픽셀 배치가 자유로운 임베디드 LED 전광판 모듈 및 제어장치 설계 (A Design of Embedded LED Display Board Module and Control Unit which the Placement of Pixels is Free)

  • 이배규;김정화
    • 전자공학회논문지
    • /
    • 제50권10호
    • /
    • pp.135-141
    • /
    • 2013
  • 본 논문에서는 적색, 녹색, 청색의 세 가지 고휘도 LED를 하나의 소켓에 설치하여, 하나의 화소체 단위를 만들고, 이 화소체들의 조합과 다수 모듈들의 조합으로 문자, 그래픽, 동영상 등의 다양한 영상을 표출할 수 있는 풀컬러 전광판 모듈 및 제어장치를 개발하였다. LED 전광판 드라이버 모듈은 일정한 단위 면적에 RGB 픽셀을 조합한 도트에 드라이버 회로가 내장된다. 기존의 이러한 모듈형태는 특정 공간 및 설치 공간에 고정된 해상도를 구현하므로 가격이 높게 책정될 수 있다. 이러한 단점을 극복하기 위하여 임의의 피치 간격으로 배열이 자유로운 LED 드라이버 및 이에 따른 LED 픽셀 모듈을 개발하였다. 본 논문의 전광판 모듈은 기존 각각의 LED 모듈을 구동함에 있어서 병렬 방식의 데이터 처리 방식을 픽셀을 기준으로 그 위의 서브 모듈과 그 상위에 마스터 모듈의 개념을 도입하고 각각의 화소를 직병렬 통신 방식으로 개선함으로 인해서 처리할 수 있는 데이터의 속도를 초당 36프레임 이상으로 끌어올려서 상대적으로 데이터의 처리량이 많은 동화상의 경우에도 원활한 디스플레이를 할 수 있도록 하였다. 또한 기존 전광판의 깜박거림 현상이 개선되어 보다 선명한 영상이 제공되는 효과도 있다.

듀얼 스캐닝을 이용한 고해상 LED 전광판 영상제어장치설계 (Using a high-resolution LED display Dual Scanning Image Control System Design)

  • 하영재;김인재;김선형
    • 한국정보통신학회논문지
    • /
    • 제15권7호
    • /
    • pp.1415-1422
    • /
    • 2011
  • 본 논문에서는 풀 칼라 전광판에서 고효율의 해상도 표출을 위해서 듀얼 스캐닝 제어방식을 제안하고, 이를 이용해서 LED전광판의 고정된 픽셀을 영상신호에 따라 픽셀 도트 형태를 변화하게 하였다. 그리고 DICT(Dynamic Image Correction Technology) 메인 컨트롤러를 이용해서 동영상 정보를 히스토그램 균등화에 의거 영상 계조도의 값을 균일하게 분포하도록 하고, 동적 영역을 변환하여 화질을 개선하며, 입력 영상을 듀얼 오토 스캔 스위칭 컨트롤러로 전광판 내 LED Module의 픽셀을 물리적으로 제어함으로서 기존 전광판 LED 픽셀 도트의 표출 대비 4배의 고해상도 표출이 가능하도록 하는 기술을 제안하고 이를 시험제작을 통해서 그 성능을 입증하였다.

히스토그램 분포 제어가 가능한 풀칼라 LED 디스플레이장치 개발 (Development of the Full color LED displays using the control algorithm of histogram distribution)

  • 하영재;진병윤;김선형
    • 한국정보통신학회논문지
    • /
    • 제14권7호
    • /
    • pp.1708-1714
    • /
    • 2010
  • 본 논문에서는 기존의 full color LED 전광판에서 일반적인 화질 개선 혹은 화질 보정의 방법으로는 감마, 휘도, 명도조절 등으로 영상의 전체적인 색상과는 상관없이 일률적으로 밝게 혹은 어둡게 처리해 왔다. 그러나 단순히 표출되는 영상 자체의 휘도를 일정 크기로 일률적으로 휘도를 조정하는 방법은 입력되는 영상 신호의 특성을 반영하지 않아 단지 화면 전체가 밝아지거나 어두워졌다는 느낌만을 줄 뿐이다. 그래서 기존의 영상 전송 방식과는 다른 새로운 기술로 LED 전광판에 입력되는 영상 데이터의 히스토그램 분석을 통해 기준 휘도 값을 결정함으로써 입력되는 영상 데이터의 특성이 반영되고, 해당 기준 휘도 값에 따라 히스토그램의 분포를 제어함으로써 LED 전광판에 표출되는 영상 휘도를 균일하게 향상시킬 수 있는 히스토그램 분포 제어가 가능한 full color 전광판의 영상 구동 처리기술을 제안하였다.

영상통신용 수중광통신 시스템 연구 (Study on Underwater Optical Communication System for Video Transmission)

  • 손현중;강진일;;김서강;최형식
    • 한국해양공학회지
    • /
    • 제32권2호
    • /
    • pp.143-150
    • /
    • 2018
  • In this study, we designed and developed an underwater LED communication system composed of an LED and a photo sensor. In addition, we experimented with video data transmission in a water tank. Two communication modules were installed in the 3 m water tank, and the image data transmission test was successfully performed at a rate of 20 frames per second(FPS), image resolution of $480{\times}272$, and data communication speed of 4 Mbps.

LED 가로등의 발열 패턴 및 전류 특성에 관한 연구 (Study on Thermal Pattern and Current Characteristics of an LED Street Lamp)

  • 김향곤;최충석
    • 전기학회논문지P
    • /
    • 제58권3호
    • /
    • pp.357-361
    • /
    • 2009
  • This study performed analysis on the thermal pattern and current characteristics of an LED ((Light Emitting Diode) street lamp. It did this using a TVS (Thermal Video System) to analyze the LED street lamp's thermal pattern, and measured its characteristics using an oscilloscope. The ambient temperature and humidity during the experiment were maintained at $24{\pm}2[^{\circ}C]$ and 50~60[%]. The capacity of the LED street lamp was 120[W] and nine sets of modules were arranged at uniform intervals. On one module, 24 LED lamps were arranged in a radial pattern. The analysis of the thermal diffusion pattern at the front of the LED lamp showed that the maximum surface temperature was approximately $34[^{\circ}C]$. In addition, there was almost no change in the temperature of the upper cover, and the temperature at the side showed a uniform thermal diffusion pattern. The surface temperature of the converter converting AC to DC increased to approximately $46[^{\circ}C]$. The analysis results of the thermal characteristics of one LED indicated uniform thermal characteristics for an initial eight minutes. However, the temperature at the center of the LED increased to approximately $82[^{\circ}C]$ after 12 minutes had elapsed. It can be seen from this that the temperature at the center of the LED was higher than the allowable temperature, $70[^{\circ}C]$ of the insulating material for general electrical devices. Therefore, it is necessary to design a lamp in such a way that the plastic insulating material does not come into contact with or get close to the LED lamp. The voltage of the LED lamp converted by the AC/DC converter was measured at DC 27[V] and the current was DC 13[A]. Consequently, it can be seen that in order to secure an adequate light source, it is important to supply a stable current that was greater than the current of other light sources. Therefore, appropriate radiation of heat is required to secure the stability and reliability of the system.

중학교용 에너지 교육 자료 개발 연구 (A Study on Development of Energy Education Materials for Middle School Students)

  • 최돈형;이양락
    • 한국환경교육학회지:환경교육
    • /
    • 제7권1호
    • /
    • pp.46-87
    • /
    • 1994
  • Our country has been consuming a huge amount of energy in the course of industrialization and its demand is expected to increase enormously in the future. However, the deposits of energy resources are so limited that the settlement of energy problem comes up the essential subject. To solve the energy problem, it is requested that new resources to gain energy stably should be developed and also energy should be economized and used effectively. The effective use of energy and an the wisdom of economy in energy are requested to everybody and these things should be habitualized from very young age through education. Nevertheless, almost every school in our country hasn’t been concerned about energy education. Even though they have a concern, they are very short of the energy education materials and the quality of the materials is not so good. Therefore it is very meaningful to the settlement of energy problem of the country to make the students who will lead our country to make the students who will lead our country in the future realize the seriousness of energy problem and to provide them the necessary knowledge and methods to solve this problem so that they practice those things in everyday life. Having these necessities, this research, supported by The Korea Energy Management Corporation(KEMCO), was performed for 8 months from April 17, 1994 to December 17, 1994. Many peoples participated in this study such as 30 staffs of researchers and authors, 5 staffs of photographers and illustrators, and 3 VCR program producers developing an energy education material set for middle school students that includes a printed material for student, a diskette for computer simulation, a teacher's guidebook, VCR material and its guidebook. The following main development direction was established : First, the material for student should be consisted of units that let students know the seriousness of energy problem. Second, the focus should be put on the necessary method and practice to economize energy actually in real life based on the basic knowledge learned in elementary school. Third, material for student should be consisted of modules to be student activity-oriented teaching-learning rather than lecture-oriented one. The activity, to maximize student's interests, should be presented in various forms such as experiments, investigation, play, data interpretation, computer simulation, visits, expression and appreciation, etc. To develop the energy education materials for middle school students, a research plan was made first. After literature review about domestic and foreign energy education materials, several research trips home and abroad, and discussion meetings, the basic theory of energy education such as the principle, objective, contents, teaching-learning method, and evaluation method was established. Material for student was developed through the following procedures : The activities in the existing energy education materials were analysed and were divided into four categories related to energy using places of home, school, community, and country, and which were again divided into three categories related to time of past, present, and future, Considering these division, nine modules which are structure units of material for student were chosen, Each module comprises 2-4 activities. Totally 31 activities were designed in this way. The syllabi were made out for each activity and writing was asked for to experts related to each activity after several discussions and revision. To complement the draft, another several discussions and revision were also made on it and then pictures and illustrations were asked for. All these procedures complete the material for student, titled ; Energy Inquiry of Middle School Students', which totals 129 pages and is all in color. As the manuscript of material for student was fixed, writing for teacher's guidebook was asked for to the same writers. The draft of teacher's guidebook was also complemented through the several concentrated works and discussions. Teacher's guidebook focused on the teaching-learning principle and methods of energy education and on the concrete instruction cases for effective instruction of material for student. It is organized with two parts : the one is 'general outline' which introduces theoretical contents and the other is 'details' which are practically helpful to teaching-learning. It is totally 131 pages including both 'general outline' and 'details'. The VCR material and its guidebook consist of contents that cultivate the good attitude trying to economize energy and raise student's interests with a purpose of strong motivation to recognize the necessity of economy and practice it. After establishing development direction of VCR material through discussion meetings and research trips, its script was made by relevant experts. Then the script was also reviewed two times. The drafted VCR material made by a video material developing expert was examined and modified by previews twice. After completion of VCR material, the VCR guidebook was made. All these procedures led to the development of VCR material which runs 20 minutes in VHS type. The VCR guidebook shows a production purpose of the program, structure of contents, evaluation methods, and contents of the program in detail to give help to instructors when they use this VCR material, When these energy education materials are used, it is desirable that the VCR material should be presented first to induce student's motive, and then material for student is introduced Since the material for student is composed of activity-oriented modules and each module is independent one another in general, and each activity is, too. the necessary module or activity can be chosen and utilized in any order according to school or class conditions. This energy education materials will contribute to the development of student's ability to solve energy problem in everyday life and teacher's ability to teach the fundamental knowledge and method in solving energy problem.

  • PDF