• 산업기술연구
• /
• 제32권A호
• /
• pp.109-114
• /
• 2012

In this paper, We studied LED(Light Emitted Diode) sensor lights system using PIR(Pyroelectric Infrared Ray) sensor, CdS and MCU(Micro Controller Unit). And applied the valley fill circuit to improve the power factor. We designed the amplifier for each sensor and the LED driver for constant current which is the buck converter. Also, we proposed the algorithm of LED control by each sensors using MCU. Experimental results showed that power factor is 92% with valley fill circuit.

• 한국전기전자재료학회논문지
• /
• 제28권2호
• /
• pp.142-147
• /
• 2015

The artificial light sources for growth of plant are usually high-pressure sodium lamp, metal haloids lamp, and fluorescent light; however, these light sources have relatively weaker Red and Blue lights that are necessary for growth of plants. Especially the effect of Photosynthetic Photon Flux Density (PPFD) is pointed out as the weakness. Meanwhile, LED light source can be selected by specific wavelength to greatly improve the effect of PPFD. In this regard, this paper aims to investigate the promotion of plant growth by measuring photosynthetic photon flux density (hereafter referred to as PPFD) according to changes in light quality of the LED light sources. Towards this end, LED light sources for plant growth were produced with 4 kinds of mono-chromatic lights and 6 kinds of combined lights by mixing red, blue, green and white lights. A comparative analysis was conducted to investigate the effects of optical properties and PPFD on plants (green leaf lettuce) using the produced light sources. The results monochromatic light has fastest growth rate, but plant growth conditions have poor. This being so, mixed light is suitable for the green leaf lettuce.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1650-1655
• /
• 2007

A lights-out detector, which helps the person in charge of maintenance make a quick judgment in the event of a failure of LED-type traffic lights, was explored/developed and installed/ tested, at Seoul Metro, after they developed a patented pilot product in 2005; and, a product improvement test was conducted to ensure reasonable maintenance of signaling facilities. Having better compatibility with existing circuit in use and displaying stable load current, the device makes the maintenance of lights-out detection and alert easier.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.94-105
• /
• 2016

The objective of the work was to evaluate the impact of lighting energy to cooling and heating consumption in medium scale office building, when currently installed fluorescent lights were replaced with various LED lighting fixtures. This evaluation comes from an integrated approach combining the proper indoor lighting environment and the thermal aspects of cooling & heating consumption in office building. These simulations were performed by coupling an appropriate luminaire analysis for energy consumption and a dynamic thermal simulation software (TRNSYS). To analyze comparative study of effects on the heating, cooling loads, and energy consumption of an LED lamp application, 2 types of LED lamp with low light power watt(LPW) 24W and high LPW 7.5W and a fluorescent lights(FL) with 37W are used respectively. Integrated building energy consumption decreased up to 3.2% when fluorescent lamps were replaced with LEDs. Thus, the high LPW of LED(7.5W) replaced with the same number of FL shows an effective energy saving and cost- effective luminary.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.1-7
• /
• 2008

본 논문에서는 무선랜을 활용하여서 이동성과 유니버스가 크게 증가하고 다양한 조명연출이 가능한 새로운 WDMX 제어기를 제안, 설계, 및 구현한다. 먼저 DMX 프로토콜이 8비트 마이크로콘트롤러를 사용하여 구현한다. 그리고 DMX 프로토콜과 802.11b 무선랜 기반 프로토콜 스택간의 프로토콜 변환 방법을 제안하고 구현한다. 끝으로 개발된 WDMX 제어기를 검증하기 위하여 상업용 DMX 장비와 연계시험을 실시하며, 최대 9,999 슬레이브를 초당 30번 refresh 할 수 있는 다양한 조명효과의 가능성을 보여준다.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.869-877
• /
• 2012

This paper presents a current-balancing circuit for security lights that uses parallel-connected LEDs. The parallel connection of LEDs causes current differences between the LED strings because of characteristic deviations. These differences can reduce the lifespan of a particular point of LEDs by thermal spotting. They can also cause non-uniform luminance of the lighting device. Among the different methods for solving these problems, the method using current-balancing transformers makes it easy to compensate for current differences and it has a simple circuitry. However, while the balancing transformer has been applied to AC light sources, LEDs operate on a DC source, so the driving circuitry and the design method have to be changed and their performances must be verified. Thus in this paper, a design method of the balancing transformer network and the driving circuitry for LEDs is proposed. The proposed design method could have a smaller size than the conventional design method. The proposed circuitry is applied to three types of 100-watt LED security lights, which use different LEDs. Experimental results are presented to verify the performance of the designed driving circuits.

• 한국정보통신학회논문지
• /
• 제15권5호
• /
• pp.1045-1052
• /
• 2011

최근 복합 문화 시설이 증가하면서 지하 공간 활용이 확대됨에 따라, 사용자의 실내 위치에 따른 주변 정보만을 무선으로 제공해주는 맞춤형 서비스에 대한 요구도 확산되고 있다. LED 조명을 이용한 가시광 통신 방식의 경우, GPS를 사용할 수 없는 실내 공간에서 위치 기반 서비스를 구현하기에 적합하다. 이에 본 논문에서는 가시광 통신을 이용한 실내 위치 기반 서비스를 구현하기 위해 기준 위치를 구분하는 실험에 대해 다룬다. LED 조명의 특성을 고려하여 LED와 PD 간의 각도 및 거리에 따라 LED 조명별로 서로 다른 식별 패턴을 ASCII 코드로 전송한 결과 최대 1.75m의 거리까지 LED 조명의 식별자를 수신할 수 있음을 확인한다. 이러한 실험 결과를 통하여 LED 조명을 이용한 실내 네비게이션의 가능성을 확인해볼 수 있다.

• 한국위성정보통신학회논문지
• /
• 제5권2호
• /
• pp.69-74
• /
• 2010

본 논문에서는 LED 조명 기반의 실내 측위 시스템을 제안하였다. LED가 빛을 방출하며 고속의 switching이 가능하다는 반도체 조명이라는 특징을 이용하여 각각의 LED 조명에 고유의 8 비트 ID를 부여 후, 이를 방출되는 조명 빛에 변조하여 보내주었다. 수신기는 16 개의 LED 조명으로부터 조합된 정보를 수신하게 되고, 수신된 정보와 각각의 ID 정보 간의 correlation coefficient를 이용하여 $4\;m\;{\times}\;4\;m\;{\times}\;2\;m$의 공간에서 100 cm 및 50 cm resolution을 가지는 위치인식 시스템을 시뮬레이션을 통해 구현하여 보았다. 제안된 측위 시스템은 간단한 알고리즘을 사용하였고, LED 조명 인프라를 사용하여 구축함으로써 설치비용 절감이 가능할 것이라 기대된다.

• 한국가금학회지
• /
• 제46권4호
• /
• pp.297-304
• /
• 2019

This study evaluated the effects of stocking density on performance and behavioral activities of 35-day-old broilers in relation to incandescent white bulb (IB) light and LED yellow and white light. A total of 1,650 day-old chicks were weighed and randomly allocated into six treatment groups in a 2 × 3 factorial arrangement based on stocking density (14 birds m^-2 and 22 birds m^-2) and color of lights (IB; monochromatic LED yellow and white light) with five replicates for each treatment. The results showed that final body weight, weight gain and feed conversion of broilers were improved at a stocking density of 14 birds m^-2 with exposure to LED lights. Similarly, broilers spent more time exhibiting inactive behavior (e.g. standing) and active behaviors (e.g. walking and walking plus pecking) under 14 birds m^-2 with exposure to lights as compared that of other treatment groups. Regarding a stocking density of 22 birds m^-2, broilers performance traits were negatively affected and also activities were less. The performance of broilers was not significantly altered for the main factor of different lights but broilers were less inactive (e.g less time spent sitting plus standing) and more time spent active behavior in walking under IB light than LED light. Thus, we concluded that a stocking density 14 birds m^-2 with exposure to LED light significantly improved broiler performance and behavioral activity and these conditions could therefore improve the overall welfare of farmed chickens.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.45-48
• /
• 2010

A direct-lit liquid crystal display that does not use color filters is proposed. A backlight unit that employs compartmentalized RGB LED and lenticular-lens arrays is used instead of color filters to direct the RGB LED lights into the RGB subpixels. The color-filterless LED backlight design, simulation, and experiment results are presented.