• 원예과학기술지
• /
• 제34권1호
• /
• pp.84-93
• /
• 2016

인공광 식물공장은 조명에 많은 전력이 소요되므로 광이용효율의 향상은 필수적이다. 본 연구에서는 식물공장의 LED 광원에 산란 유리를 사용함으로써 광이용효율을 향상하고자 하였다. 실험에는 Haze factor 40%와 80%의 산란 유리가 적용된 두 가지 처리구와 산란 유리를 사용하지 않은 대조구를 두었다. 3-D 광선추적기법을 이용하여 상추 작물의 군락 광분포를 분석하였으며 군락 광합성률은 밀폐 아크릴 챔버를 이용하여 측정하였다. 각 처리구 별로 16주의 상추를 수경재배 방식으로 28일간 재배하여 생장량을 비교하였다. 시뮬레이션 결과, 모든 처리구에서 작물의 상단부에 광량이 집중되었고 대조구에서 작물 상부에 광량 핫스팟이 발생하며 처리구에 비하여 광이용효율이 감소하였다. 총 광 흡수량은 대조구에서 가장 높았으나 유효 광 흡수량은 처리구에서 더 높았고 산란광의 비율이 높은 처리에서 더 높게 나타났다. 작물의 군락 광합성률과 생장량은 산란 유리를 사용한 처리구에서 대조구에 비해 높게 나타났다. 결과적으로 산란 유리의 이용을 통해 상추의 군락 내 광분포가 개선되었고 군락 광합성률 및 생장량이 증가하여 식물공장의 광이용효율이 향상되는 것으로 나타났다.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.169-180
• /
• 2018

백색 발광다이오드(LEDs)는 형광등보다 경제적이며 높은 밝기, 수명, 내구성을 제공한다. 이러한 LED는 사람들의 일상생활과 밀접하게 연결되어 있기 때문에 LED의 조광제어는 에너지 절약과 삶의 질 향상에 중요한 요소이다. 이 LED를 사용하는 가시광통신시스템에서는 안테나 수에 비례해 채널 용량을 확보할 수 있다는 점에서 복수의 MIMO(입력 다중 출력) 기술이 많은 관심을 끌었다. 본 논문은 가시광통신(VLC) 시스템에서 적용된 공간-시간 블록 코드(STBC) 기법의 세 가지 변조의 전력 성능을 분석한다. 변조 방식은 RZ-OOK(Return-to-On-Ok), 가변 펄스 위치 변조(VPPM), 중첩 펄스 위치 변조(OPPM) 및 조광 제어를 적용하였다. 전력 요구사항과 전력 소비는 세 가지 종류의 변조 하에서 $2{\times}2$ STBC-VLC 환경에서 전력 효율을 비교하는 지표로 사용되었다. 조광 제어가 각 변조 체계의 통신 성능에 영향을 미치는지 확인하였다. 확인 결과 VPPM은 세 가지 변조 중 소비량이 더 많았으며 OPPM은 VPPM에 비해 에너지 절감 효과를 보였다.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.33-41
• /
• 2013

As professional postnatal care systems have been rapidly supplied, there is sharp increase of postnatal care centers without legal regulations for a mother and a infant. For the quick recovery of mothers, newborn infants that have weaker immune systems are being managed in group in the postnatal care centers. Recently, the attention of the postnatal care centers has been growing because the problem of pneumonia which led to result in a casuality in a infant unit was happen. So, this research analyzed the indoor environment of infant unit through measuring formaldehyde, carbon dioxide, intensity of illumination. As a result of the data, infant units showed higher concentration of formaldehyde and carbon dioxide than Indoor Air Quality Control Law. Moreover, infant units was measured higher intensity of illumination than the range of optimum illumination for infants.

• Journal of Microbiology and Biotechnology
• /
• 제10권6호
• /
• pp.817-822
• /
• 2000

A proper flashing light is expected to enhance microalgal biomass productivity and photosynthetic efficiency. The effect of flashing light on high-density Chlorella kessleri (UTEX 398) cultures was studied using light-emitting diodes. A frequency modulator was designed to flash LEDs, and the device successfully provided wide range of frequencies and various duty cycles of flashing. A relatively high frequencies of 10, 20 and 50 kHz were used in this study. These frequencies have very short flashing time ($2-50{\mu}s$), which corresponded to the time constant of the light reaction of photosynthesis. The specific oxygen production rates of photosynthesis under flashing light were compared with those under an equivalent continuous light in specially designed illumination cuvette. The specific oxygen production rates under flashing light were 5-25% higher than those under the continuous light. A range of cell concentration was discovered, where the benefit of flashing light was maximized. The photosynthetic efficiency was also higher under flashing light with frequencies of over 1 kHz, which was a clear indication of flashing light effect and the degree of mutual shading could by overcome by flashing lights, particularly at high-density algal cultures.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.134-141
• /
• 2003

An industrial product is designed and fabricated, followed by the inspection process in order to check whether it is dimensionally tolerable or not. The machining process produces a part such as a mold or die, in which the three-dimensional coordinate might be measured by a CMM (Coordinate Measuring Machine) for assessment of its dimension. It is not ignorable, however, that a CMM measurement requires a lot of operating time and cost, which has led to many studies on the OMM system. The OMM system can be categorized into contact and non-contact types, and each of which has its own strengths and weaknesses. Non-contacting types generally utilize structured lights, sounds or magnetic fields. Though they show rather poor performance in positional accuracy, the measuring speed is faster than the contacting probes. This paper presents the development of an OMM system based on a non-contacting laser displacement sensing apparatus and CAD model. The system is composed of software modules of center-aligning and measuring, which has been operated and verified on a NC machining center on a shop floor.

• 복식
• /
• 제58권2호
• /
• pp.120-133
• /
• 2008

The purpose of this study is to analysis types of light and to find the characteristics of light in contemporary fashion design. In a scientific context, light is electromagnetic radiation of a wavelength that has the characteristics of straightness, reflection, refraction, scattering and diffraction. But in philosophical speculations, light has been used as a metaphor of 'being', 'to-be' or 'enlightenment.' And through the ages, people have tried to represent and apply the light into plastic art like painting and architecture. The types of light in fashion design was categorized as those; reflective light from the surface of clothing which is the result of interaction between illumination and material, representative light as the pattern of light or light effect such as sun or its rays and optical or psychedelic patterns, luminescent light from light emitting material like phosphorescence or LED which combines into fashion design, projective light from a medium to reveal virtual patterns on the surface or a fashion design itself using holography. These lights in fashion design can be considered as reflection of emphasis of sexuality, longing for fantasy and mystique, visualization of interaction and communication and groping for the play.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1527-1530
• /
• 2009

A LCoS micro-display using polymer dispersed liquid crystals (PDLCs) for light switching layer was fabricated. The Si backplane of SVGA ($800{\times}600$) with a pixel size of $14{\times}14mm^2$ was prepared by a $0.35{\mu}m$ 18V CMOS process. PDLCs were filled in the gap between backplane and ITO glass by conventional vacuum filling method. The prepared panels were driven by a field sequential color (FSC) scheme at the frequency of 180Hz and were successful in modulating LED lights to show projection images. The preparation and performance of PDLC-LCoS are presented.

• 반도체디스플레이기술학회지
• /
• 제13권4호
• /
• pp.59-63
• /
• 2014

Previous studies have selected wireless power transmission system using 2.45 GHz of ISM band, but the researches for 5.8 GHz microwave wireless power transmission have been relatively rare. The 5.8 GHz has some advantages compared with 2.45 GHz. Those are smaller antenna and smaller integrated system for RFIC. In this paper, the 5.8 GHz wireless power transmission system was developed and transmission efficiency was measured according to the distance. A transmitter sent the amplified microwaves through an antenna amplified by a power amplifier of 1W for 5.8 GHz, and a receiver was converted to DC from RF through a RF-DC Converter. In the 1W 5.8GHz wireless power transmission system, the converted currents and voltages were measured to evaluate transmission efficiency at each distance where LED lights up to 1m. The RF-DC Converter is designed and fabricated by impedance matching using full-wave rectifier circuit. The transmission-efficiency of the system shows from 1.05% at 0cm to 0.095% at 100cm by distance.

• 한국전자통신학회논문지
• /
• 제6권3호
• /
• pp.439-444
• /
• 2011

본 논문에서는 자동차에서 자동차의 속도, 엔진 회전속도, 연료, 엔진 온도, 연료 게이지, 회전표시등과 각종 경보 표시등 정보를 운전자에게 제공하는 차세대용 지능형 통합 스마트 모니터 시스템을 구현하였다. 구현한 지능형 스마트 HUD 모니터 시스템은 박막 트랜지스터 액정 표시 장치, 액정 표시 장치 배경 조명 발광 다이오드, 평면 미러, 특수 제작된 렌즈 및 구동회로로 구성되어 있으며, 운전자 안전성을 고려한 차세대 지능형 자동차 통합 HUD 시스템에 적용 가능함을 나타내었다.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.759-766
• /
• 2018

Although the Act on the Prevention of Light Pollution Due to Artificial Lighting has been enforced since 2013, the area of advertisement lighting has made slow progress in solving the problems of light pollution. This paper first investigated institutional problems by analyzing domestic laws and regulations relating to the light pollution of advertisement lighting, and investigated and analyzed methods for reducing light pollution that were applied in overseas countries. Then, problems of light pollution were analyzed by conducting a research on the actual status of advertisement lightings installed in South Korea and applying various methods for reducing light pollution, and advertisement lighting using LED was recommended. As a method for reducing light pollution that can be applied to the process of manufacturing channel letter-type advertisement lights, power consumption per unit area ($W/m^2$) was proposed, and $100W/m^2$ was recommended as a value currently suitable for South Korea.