• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.76-78
• /
• 2009

A liquid crystal display that does not use color filters is proposed. A backlight unit that employs compartmentalized RGB LED arrays and a lenticular lens array is used instead of the color filters in order to direct RGB LED lights into the RGB subpixels. A design of color-filterless LED backlight and experimental results are presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.586-591
• /
• 2015

In recent years, along with the rapid development of LED technology, indoor positioning systems based on visible light communication (VLC) have been researched. In this paper, we propose an accurate indoor positioning method using white-light LEDs and a dual image sensor. Indoor LED lights are located at the ceiling in a room and broadcast information on their positions using VLC technology. A mobile device with a dual image sensor receives LED position information by VLC and estimates its position and azimuth angle. Simulation and experimental results are given to show the performance of the proposed indoor positioning system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.27-32
• /
• 2012

Since LED lights have advantages of long life, low-carbon and high efficiency, they have been widely used as household lamps, automotive lighting, traffic lights etc. In this study, MCPCB LED lamps for automotive LED headlights were manufactured and the performance of heat release was optimized. The developed LED headlight satisfied the target thermal performance with heat pipes and fans, and it was also shown that fan life can be prolonged three times by fan on-off control.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.66-73
• /
• 2017

This study attempted to design lights with Type II distribution suitable for LED street lights based on the regulations of street light distribution developed by the Illuminating Engineering Society of North America (IESNA). The shape of an asymmetric lens, different from that of a rotationally symmetric lens, cannot be generated using a simple mathematical formula. In the first trial, the outline of the lens was fixed and simulated to confirm the distribution type. Following ISENA regulations, some problems that occurred during simulations and repeating was be modified that process is how we detected errors. Through optical research and simulations, a lens conforming to the regulations of Type II very short, Type II short, and Type II medium distributions was developed. A prototype was developed using simulation data and it was subjected to distribution tests. The results show that it can compare with property of Type II distribution.

• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.186-193
• /
• 2019

Visible light communication technology is being studied and developed in various ways due to advantages such as high transmission speed, excellent positioning and higher security. However, existing visible light communication systems have difficulties in entering the market because they use special transmitters and receivers. We will overcome the difficulty if we develope a VLC system that uses a conventional LED light as a transmitter and a smartphone camera as a receiver. What matters is that LED lights include a scatter filter to prevent glareness for human eyes, but the existing VLC(Visual Light Communication) method can not be applied. In this paper, we propose a method to encode data with On / Off patterns of LEDs in the lighting with $M{\times}N$ LEDs. We defined parameters like L-off-able and K-seperated to facilitate the recognition of On / Off patterns in the diffused Lights. We conducted experiments using an LED lighting and smart phones to determine the parameter values. Also, the maximum transmission rate of our encoding technique is mathematically presented. Our encoding scheme can be applied to indoor and outdoor positioning applications or settlement of commercial transactions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.240-245
• /
• 2017

In order to study for the growth of fish in the aquaculture industry, the behavior analysis of rock bream (Oplegnathus fasciatus) depending on the temperature and LED lights was conducted. In this study, water temperatures from 10 to 30 degrees were used. One red light (wave length: 622 nm; light power: 811 mW) and one green light (wave length: 518 nm; light power: 648 mW) were used. Behavior of the rock bream was analyzed at an average moving distance for one minutes (AMD) and a rate of movement. The mean AMD were respectively 5.3 m, 7.3 m and 3.0 m in the red LED light, green LED light and control condition. The mean rates of movement were 77%, 88% and 61% respectively in the red LED light, green LED light and control condition. The mean AMD during 24 hours were 3.1 m, 3.1 m and 3.3 m respectively in the red LED light, green LED light and control condition.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.120-122
• /
• 2008

This paper presents a color control algorithm for LED lights with independently changable illuminance. The proposed algorithm adjusts the light intensity to obtain a desired color with alterable illuminance To verify the validity of the proposed algorithm, it was applied to control of a RGBW LED module. The achieved color temperature range of the module was from 3000K to 7500K, and the illumination one was from 500 lux to 1500 lux.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2017

This study looks at optimizinge light redistribution to improve the overall illuminance uniformity of commercial IRED modules. To obtain uniform illumination over a prescribed rectangular area, a freeform surface lens was evaluated using TracePro. The LED light overall illuminance uniformity regulated in KSC 7658 was verified using Relux software. Experimental test results showed 0.81 overall illuminance uniformity for rectangular light distribution of LED lights having a radiation angle of $80^{\circ}$. After fabricating prototype IRED lights based on these simulation results, illuminance performance was observed when used as actual IRED lighting with a nighttime CCTV system. Image observation photographs of the prototype $80^{\circ}$ rectangular IRED lights confirmed that object images can be seen clearly owing to high overall illuminance uniformity, and that dark regions of the CCTV screen were not shown.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.442-444
• /
• 2003

For the safety of aircraft, aviation obstacle lights must be attached to the transmission towers in accordance with the governing law. Aviation obstacle lights which consist of solar cells, batteries. xenon lamps and a regulator substituted for aviation obstacle lights using AC power. A xenon lamp has advantage such as high brightness but also has disadvantage like large power consumption which cause lighting system to have many solar cells and batteries. This paper introduces an application of a aviation obstacle light using LED lamp through the economic analysis between LED lamp and xenon lamp.