• 한국안광학회지
• /
• 제20권3호
• /
• pp.293-300
• /
• 2015

목적: 청색광 위험도의 정량적 지표인 청색광 복사휘도를 이용하여 안경원 내 LED 조명에 대한 청색광 위험도를 평가하였다. 방법: LED 조명의 분광복사휘도를 측정하고 청색광 복사휘도와 최대노출시간을 산출한 후, IEC 62471 분류기준에 따라 위험군을 분류하였다. 결과: 진열장에 사용된 황색 LED 조명, 천장에 사용된 백색 및 황색 LED 조명, 그리고 로고에 사용된 백색 LED 조명은 위험제외군 RG0로 분류되었지만, 진열장에 사용된 백색 LED 조명은 위험군 RG1으로 분류되었다. 진열장에 사용된 백색 LED 조명의 청색광 복사휘도는 형광등에 비하여 수십 배나 높은 것으로 나타났다. 결론: 청색광 복사휘도의 값을 이용하여 여러 가지 조명에 대한 청색광 위험을 정량적으로 표현할 수 있었다. 진열장용 백색 LED 조명은 높은 휘도와 색온도로 청색광 위험이 높음을 확인할 수 있었으며, 안경원 내의 조명 교체 시 장기적이 측면에서 시건강을 위해 적절한 밝기와 색온도의 조명을 선택하는 것이 필요하겠다.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.117-122
• /
• 2015

Purpose: Generally, 30% of the total energy consumption in office building is used for artificial indoor lightings, and almost 75-85% of electric power in fluorescent and Light-Emitting Diode (LED) lightings can be dissipated as a form of heat into indoor environment. The heat generated by indoor lightings can cause the increase of cooling load in office buildings. Thus, it its important to consider indoor lightings as a heat and light source, simultaneously. Method: In this study, we installed two kinds of indoor lightings including fluorescent and LED lightings and measured surface temperature of both indoor lightings. In addition, we obtained ambient temperature of indoor space and finally calculated total heat dissipated from plenum area and surface of lightings. Result: Total indoor heat gain was 87.17Wh and 201.36Wh in cases of six 40W-LED lightings and 64W-fluorescent lightings, respectively.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.141-144
• /
• 2009

LED Lightings market remains highly fragmented, encompassing many niche applications. Architectural lighting is the largest and many applications are for colored (R, G, B) light. Hundreds of companies worldwide are participating at the luminaire or fixture level. Standard setting is on a fast track. The larger LED lightings market scale, the more important standardization of performance evaluation techniques to clearly prescribe the product specification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1017-1018
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.547-548
• /
• 2012

• 감성과학
• /
• 제15권3호
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.674-679
• /
• 2011

In this paper, we experimented and analyzed about electric fire risk assessment methods of LED lightings for outdoor. LED lighting is composed of AC power lines, AC/DC converter, DC power lines and LED lamps. There are some risk factors of electric fire in LED lighting such as short circuit between power lines or power line and ground, dielectric breakdown, leakage current, abnormal voltage inflow, poor contacts(connections), etc. As a result of this study, insulation coverings of wire was ignited due to dielectric breakdown between power lines and molten marks were formed in copper conductor. LED lighting was blown out while short circuit, beside that, electrical disorder did not occur. When abnormal voltage was inflowed, electronic components such as varistor, condenser were damaged. Partial heating was produced and insulation was melted and carbonized by arc and heating while poor contacts were happened. We expect that the results of this study would be helpful for electrical safety of LED lightings for outdoor.

• 한국화재조사학회학술대회
• /
• 한국화재조사학회 2011년도 제21회 춘계학술대회
• /
• pp.77-97
• /
• 2011

본 논문에서 옥외용 LED 조명의 전기화재 및 감전 위험성 평가에 대하여 연구하였다. 옥외용 LED 조명관련 법 규정에 대하여 검토하였으며, LED 조명의 외형과 구조에 대하여 분석하였다. 또한, LED 조명에 대한 주수실험, DC 전로의 선간 단락, 손상된 피복의 선간 절연파괴, 과전압 유입, 건전상 및 수중에서의 DC 전로의 누전 실험을 수행하였다. 실험 결과로부터, LED 조명에서의 이상 조건에 의한 전기화재나 감전사고의 위험성이 있음을 확인할 수 있었으며, 전기안전을 위한 보호장치와 절연형 컨버터의 사용이 요구된다. 본 연구결과는 LED 조명의 전기안전 확보를 위한 제 규정의 개선과 전기사고의 조사에 도움이 될 것으로 기대된다.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.25-33
• /
• 2015

LED lightings combined with IT technology can provide variable illumination environments that can be controlled by users according to their emotional need and preferences. This is one of the most beneficial functions compared with conventional lightings offering only fixed color and brightness. There is however lack of analysis data for creating practical lighting solutions satisfying user preferences in a wide range of applications from residential to commercial places. To materialize the technical advantages of user-controllable LED lightings, more observation data are required in various situations. Therefore, dissimilar emotional needs are determined in the present study for compartmental office spaces (staff lounge room, meeting room and desk job place) through subjective experiments by 45 observers. The optimum lighting conditions (CCT and illuminance) are finally obtained using Response Surface Method and relevant prediction functions are also deduced. The final outcome can be applied for making user-preferred office illumination products.

• 조명전기설비학회논문지
• /
• 제29권2호
• /
• pp.62-68
• /
• 2015

Recently, LED is being used as various applications such as home lightings, work lightings and so on. EMI noise generated from LED driver have become a problem according to increase the use of LED. In this paper, Active EMI filter composed active and passive components is discribed as a method of solving a problem of EMI. The proposed filter is applied to the 160W LED load to verify performance experimentally. To compare the performance, We did an experiment using the proposed filter and the passive filter on the same 160W LED load and Driver System. As a result, The proposed Active EMI filter attenuated Conduction EMI noise better than any existing passive filter.