• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1912-1914
• /
• 2004

As the characteristics of LED disposition, LED warning light must be designed differently from general incandescent lamp warning light whose light source is located in origin. In this paper, the globe's lens of LED warning light was designed considering the LED intensity distribution and the arrangement of the LED. And prove the appropriateness of that design by simulation in LightTools which is optical design program.

• 조명전기설비학회논문지
• /
• 제29권5호
• /
• pp.26-33
• /
• 2015

Secondary optical system designed for LED bulb which emits light in all directions was simulated with Energy Star standards. Components of the optical system were LED light source, the cover of the LED bulb and reflector which is to confirm the diffuser plate and LightTools software was used to design the illumination optics. The main points of the secondary optical system design are the location of the LED light source, the shape of the LED bulb cover, the location of the reflection plate, and the scattering properties of the diffusing plate. Mechanism of the LED bulb is that the light emitted from the light source move on to the backward after reflected by the coated light cover from the inside and then the reflected light is scattered by the diffuser plate. The LED bulb was designed to satisfy the standard light distribution and color specifications of the Energy Star(IES LM-79-08).

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.361-367
• /
• 2011

In this paper, it was attempted to analyze the optimal design of light emitting diode (LED), a source of back light unit (BLU). LED is beginning with commercialized red LED which is made by GaAsP compound semiconductor, and has been developed focusing on liquid crystal panel. In order to get the optimal design, optical simulation was made by analyzing luminosity shape, reflector angle, chip depth, and chip position of LED lighting. Final results show that the proposed LED characteristics were useful to increase light efficiency and it has been proven by distribution chart for actual exposed light on the light guide panel (LGP).

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.24-31
• /
• 2014

This paper dealt with the LED optical illumination system design for the Masthead navigation light to replace halogen lamps. We made Fresnel lens satisfy luminous intensity distribution of "Convention on the International Regulation for Preventing Collisions at Sea(COLREG)". The optical system is designed by classifying three parts: light source, lens, and cut off plate. The source of light has been made to have the uniform horizontal and vertical light distribution by placing 6 LEDs at intervals of $54^{\circ}$, and as the cylindrical Fresnel lens, the lens has been designed to achieve the uniform horizontal and vertical light distribution in the range of plain light. Finally, the cover has been designed to block the light from the outside of plain light and ultimately met the standards for light distribution of navigation lights. In addition, the validity of design has been verified with manufacturing a trial product.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.70-76
• /
• 2016

Commercialization of surface lighting using Light Emitting Diodes (LED) has embraced the advance to Organic Light Emitting Diode (OLED) technology. This is necessary to achieve light-efficiency-improvement and longer component life. The range of application of LED lighting for both interior and outdoor lights has been gradually expanding. Automobiles and home appliances are now included. In the case of LED surface lighting in a domestic refrigerator, achieving high efficiency requires optimization of the number of LEDs in a pack. Optimization is also required in the design stage of development with regard to the conversion of the light source type from point light sources to the surface light type. This paper addresses these design problems. It presents a study of brightness variations for design solutions that differ from the existing technology in both the number of LED packages and use of Light Gathering Power (LGP) information. The intention is to facilitate production of high brightness LED surface lighting for domestic refrigerators.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.15-16
• /
• 2007

A design of a light coupler between a LED and a very thin light guide (0.2mm thickness) is presented. Due to the light guide's very thin thickness, conventional light couplings between LEDs and light guides do not provide enough coupling efficiency. We investigate two different coupling methods: side coupling using a complex-shaped lens and bottom coupling using a grating. This paper presents a draft design of the first approach which couples light from 0.4mm LED to 0.2mm light guide without significant losses.

• 한국통신학회논문지
• /
• 제39C권6호
• /
• pp.476-481
• /
• 2014

본 논문에서는 가시광 통신의 광원으로 사용되는 백색 LED (Light Emitting Diode)의 변조 대역폭 확장을 위해 송신단에 전치 등화기 회로를 설계하였다. 또한 청색 광 필터를 이용하여 백색 LED의 주파수 응답을 저해하는 황색 형광물질의 영향을 제거하였고 이로 인해 발생하는 신호 세기의 저하를 광학 설계를 통해 극복하였다. 이 시스템을 통해 백색 LED의 변조 대역폭을 결정하는 3 dB 대역폭을 3 MHz에서 25 MHz이상으로 향상 시켰으며 광학 설계를 통해 추가적인 신호 세기를 확보하여 전송 거리를 증가시켰다. 통신 성능 확인을 위해 LED에 NRZ-OOK (신호를 변조시켜 전송하여, APD (Avalanche Photo Diode)를 통하여 수신하였고 이를 CSA (Communication System Analyzer)와 RFSA (Radio Frequency Spectrum Analyzer)를 통해 분석하였다. 이를 통해 전치 등화기와 광학 설계를 이용하여 전송거리 4.5 m에서 30 Mbps, 1.5 m에서 50 Mbps의 신호 전송이 가능함을 실험적으로 검증하였다.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1565-1568
• /
• 2008

본 논문은 LED조명기구의 상용화에 문제가 되고 있는 방열설계에 관한 논문으로서, CF-design을 이용한 방열해석을 통하여 문제해결의 방법을 제시한다. 해석 결과 시뮬레이션 값과 시작품 제작 후 측정 온도와의 차이가 6[$^{\circ}C$]이하로 도출되었으며 주어진 제 요소들을 잘 활용하면 실제작품의 목표치에 근접하는 결과를 얻을 수 있다.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.129-136
• /
• 2012

As the importance of eco-friendly and energy saving issues are emphasized in lighting as consciousness about energy saving is elated worldwide, demand for natural resources such as gas increases, supply of LED lighting is spread. Owing to white LED's development and price fall. It is expected to LED High Luminance Emitting Diode. LED's brightness and long life-time that surpass fluorescent light in the latest as well as is used by back light source of thin film LCD, low electric power attrition rate by advantage do and widen the market at the world lighting lamp market that is potential market. Accordingly, study about suitability of LED lighting is activated but space that apply actual LED lighting fixtures yet is less and advanced researches about LED fixtures' applied apaces are slight compared to existing light source up to now because is not many on this. The result of the experiment shows similar tendency with the existing light sources'. Through a psychological reaction experiment in the LED lighting experiencing space that can control of color temperature and lighting level, this study is wished to use to the data for lighting design of space that LED lighting fixtures are applied hereafter.

• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.296-305
• /
• 2012

본 연구에서는 기존 LED 보안등의 LED 광원 직진성에 의한 눈부심 현상을 개선하고, 조도 균제도를 높게 유지하며, 회전 대칭이 아닌 편축으로 긴 배광 분포를 가지도록 하여 LED 보안등 간에 생기는 광 공핍현상을 해결할 수 있는 보안등용 LED 2차 렌즈를 개발하였다. 개발 광학계는 보안등용 조명 기준에 만족하도록 설계하였으며, 렌즈의 형태는 단일 렌즈로 조명 설계 및 해석 프로그램을 이용한 설계와 분석을 통해 최적화를 하였다. Mock-up을 제작하여 실제 측정을 통해 조도 측정 데이터와 조도 균제도 데이터를 확보하였다.