• 전기학회논문지P
• /
• 제58권4호
• /
• pp.632-632
• /
• 2009

The purpose of this study is to present the range of defects mentioned in the Product Liability (PL) and to establish an objective basis and grounds for the analysis of accidents expected to happen by analyzing and presenting the external flame pattern and electrical characteristics of an LED streetlight lamp, a new lighting lamp. From the analysis of the cross-section of a cable carbonized by an external flame, it was observed that the wire's strand and insulation material had solidly adhered, and that greater voids were formed at the surface than at the center. Irregular carbide lumps were formed in the globe directly exposed to the flame, and the globe carbonized by the indirect flame showed characteristics that they had melted and flowed downward. It was found that the forward and backward resistances of the normal LED were approximately 1.74 [$M{\Omega}$] and 140 [$M{\Omega}$], respectively. The lamp burnt by the strong flame exhibited infinite forward and backward resistances and the LED did not emit light. The carbonized LED lamp was gray and exhibited fine delaminations. According to the Product Liability, a product defect signifies a simple product defect. Most of the defects were caused by the lack of stability, and the defect of the product itself occurred during the design and manufacture. The defects in warnings and markings include an insufficiency of handling manuals and warnings, expressive warranty violations, defective markings, etc. In order to prevent an accident resulting from a product, it is necessary to prepare safety warnings and documentation, establish clear-cut lines of liabilities, and subscribe insurances. However, it could be seen that important factors against the Product Liability were product improvement, response to compensation requests and law suits, credit restoration, etc.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.8-17
• /
• 2012

Unlike traditional lightings, LED lighting is one of objects that sends user an emotional segments through brightness control from various color temperature and dimming control. Also, within present interior lighting environment, emotional researches about traditional fluorescent lamp and newly implemented LED lighting environment are in active progress. Despite the fact adjectives describing emotions and scale modeling have been repeatedly used in many cases for a long time, there seems to be a lack of results in reliability, and there is a limitation for applying into actual lighting design. The purpose of this study is to construct an actual sized test-bed, which is used to draw out one's emotional words of behavior patterns from inner emotional experiences about lighting environment in an office space. Also, having fluorescent lamp and LED lighting as the main test subjects, we have tested emotional parts according to the changes of color temperature and adjective vocabularies chosen from user's action, and we have compared and analyzed the drawn out data. Also, having fluorescent lamp and LED lighting as the main test subjects, we have tested emotional parts according to the changes of color temperature and adjective vocabularies chosen from user's action, and we have compared and analyzed the drawn out data.

• 한국전기전자재료학회논문지
• /
• 제25권10호
• /
• pp.759-765
• /
• 2012

In this paper, a temperature control for LED (light emitting diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan with various size of heat sinks was performed. To reduce the fan sound noise, a method of reducing the operation time with optimal size of the heat sink was studied. Also, a control of LED lamps using RF communication was studied.

• 한국터널지하공간학회 논문집
• /
• 제23권5호
• /
• pp.315-323
• /
• 2021

터널은 주·야간 모두 인공조명을 사용해야 되는 특성으로 인해 에너지 소비가 가장 많이 발생하는 도로 공간으로, 전기요금 절감 등을 위해 기존 터널조명 광원 대비 낮은 소비전력, 장수명의 장점을 갖는 LED램프로 교체 중에 있다. 터널구조물은 공용 중 부속시설 교체라는 일련의 중장기적이고 지속적인 과정이 수반되므로, 시설물 공용기간 동안의 생애주기비용을 고려해야 사회간접자본의 효율적인 활용을 기대할 수 있다. 따라서 본 연구에서 터널 조명광원을 고압나트륨램프에서 LED램프로 교체 시 LCC측면의 절감효과를 정량적으로 분석하였으며, 터널 조명 광원을 LED램프로 교체 시 램프의 수명증대에 의한 교체주기 감소 및 이로 인한 유지관리 비용 감소효과가 매우 큰 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.145-147
• /
• 2003

This paper presents a method of improvement of color mixing in an RGB LED white lamp. The deviation from white light after RGB color mixing results mainly from the difference in the ray direction among LEDs. The authors propose a method using tilted lenses covered over each LED to deflect the overall direction of the ray generated from far-sited LEDs toward the center axis of the lamp. The degree of improvement is evaluated using a color discrimination method based on McAdam ellipse.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2196-2198
• /
• 2005

The luminous intensity distribution of a 1W high-power LED with a wide view angle should be concentrated to be used as a light source for an automotive reading lamp. In this paper, an optical lens made of PMMA is simulated by using an optical design software for that purpose. As the result, with the help of the devised lens, the reading light gives over 80 lx at the center of a target surface of radius of 0.2m located below 0.5m from the lamp, and a minimum of 20 lx at the perimeter of the target surface. Thus, a 1W high-power LED with an appropriate lens would suffice for an automotive reading lamp.

• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.191-198
• /
• 2015

최근 에너지 절약과 친환경 조명에 대한 관심이 고조되면서 기존 광원보다 효율이 좋은 LED 조명에 대한 연구가 증가되고 있다. LED 조명은 타 조명에 비해 초절전, 친환경, 장수명으로 21세기에 적합한 조명이라고 할 수 있다. 본 연구의 목적은 기존의 LED 등기구 전원구동회로에 마이크로 컨트롤러 기반 볼트 레귤레이터를 이용한 전류 제어시스템을 장착하여 다양한 LED 등기구에 적합한 전류가변제어시스템을 개발하는 것이다. 이를 위해 가변저항과 보상저항을 이용하여 LED 순방향 전압값에 대한 영향이 최소화되도록 회로를 구성하여 안정적인 전원공급과 전류조정이 가능하도록 하는 전류가변제어시스템을 제안한다. 본 연구에서 제시한 마이크로 컨트롤러 기반 볼트 레귤레이터를 이용한 정전류 회로 및 이를 이용한 에너지 절감방법은 발광소자에 불필요한 발열을 최소화할 수 있고, 저항값을 세밀하게 조정할 수 있어 다양한 대용량 LED 등기구에 적용 가능하다. 본 연구는 궁극적으로 안정적인 전류 공급으로 LED 등기구의 신뢰성을 향상시킬 수 있을 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.553-554
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.357-358
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.403-404
• /
• 2009