• 전자공학회논문지 IE
• /
• v.45 no.4
• /
• pp.42-46
• /
• 2008

LED's production does Die bonding and Wire bonding on L/F board, and do epoxy dispensing to protect LED Chip and improve brightness. In this paper, we propose and realize a x-y-z axis robot mechanism detecting automatically eopxy's amount being filled, control data of pressure and time by the quantity automatic revision, and epoxy of the schedule amount dispensing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2113-2120
• /
• 2013

In this study, an efficient machine vision based inspection system is developed for the in-line measurement of phosphor resin dispensing shapes on LED chip package. Since the phosphor resin (target material) has semitransparent characteristics, illuminated light beam is reflected from the bottom of the chip as well as from the surface. Since such phenomenon can deteriorate inspection reliability, a white LED and a 635nm laser slit beams are experimentally tested to decide suitable illumination optics. Also, specular and diffuse reflection methods are tested to decide suitable optical triangulation. As a result, it can be known that the combination of a white slit beam source and specular reflection method show the best inspection results. The Catmull-Rom spline interpolation is applied to the obtained data to form smoother surface. From the results, it can be conclude that the developed system can be sucessfully applied to the in-line inspection of LED chip packaging process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Korean Journal of Clinical Pharmacy
• /
• v.15 no.1
• /
• pp.27-33
• /
• 2005

This study was intended to contribute towards the development of proper drug use system for pediatric patients by investigationg problems related to their medication and identifying drugs that need to be developed into low dosage tab-lets or syrups for pediatric use based on our analysis on the prescriptions for pediatric inpatients from 22 hospitals in South Korea on a day of Feb. 2003. The usage rates in the proportion of less than 0.5 and 1 per unit of oral solid formulation were $29.9{\%}$ and $54.3{\%}$ in hospitals with 1000 beds or more, 36.5 and $60.6{\%}$ in hospitals with 500 to less than 1000 beds, $60.8{\%}$ and $81.6{\%}$ in hospitals with less than 500 beds. Of the 63 oral solid formulation products that were used two or more times in the proportion oi less than 0.5 units, 34 products ($54.0{\%}$) were used as such despite the fact that syrups and lower dosage tablets or capsules were available in the market, and 24 products ($38.1{\%}$) so even when syrup formulations were available. Therefore, it would be desirable that pharmacist communities in charge of dispensing identify the most frequently crushed drugs or those that require special attention in choosing dispensing powders or solutions and develop dispensing guidelines that can be adopted by pharmacists in practice. Moreover government-led policies are needed to encourage development and manufacture of the formulations for pediatrics and to correct unsound prescription and dispensing practices such as using crushed forms of certain oral solid formulations although alternative formulations are available in the market.

• Transactions of Materials Processing
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2015

For chromaticity correction, it is necessary to dispense high viscosity phosphor slurry since it greatly affects the performance of white LEDs. However, it is quite difficult to dispense high viscosity fluorescent materials. In the current study, micro-discharge electrostatic printing has been used for dispensing various high viscosity phosphor slurries. We have achieved dispersions of up to 50 µg using drop on demand (DOD) discharge experiments. The experiments were conducted with different combinations of process variables such as applied voltage, pneumatic pressure, and frequency.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.52-58
• /
• 2017

An ultra-high precise ejection process is essential in a dispensing system for fabricating various precision parts such as a semiconductor, LED, and camera module. The size of such parts has been decreasing, which implies that a precise ejecting technique is required. A phosphor-containing liquid is ejected via a dispenser using dual piezoelectric actuators that are used for generating a high-speed dispensing mechanism. The rod and nozzle continuously contact in high speed to eject the liquid. However, the high-strength filler or phosphor in the liquid causes wear on the surfaces of the rod and nozzle during the dispensing process. As a result, the ejection reliability decreases as the wear on the surfaces increases. Therefore, it is necessary to estimate the wear characteristics of the rod and nozzle via an experiment and FE analysis. Reliability rests up to 1,000 cycles are conducted under relatively severe conditions. The flow rate and surfaces roughness of the rod and nozzle are measured in each ejection cycle. The surface images and wear volume are obtained before and after the tests and the ejection reliability is confirmed by measuring the flow rate of the liquid. The experimental results show that the ejection reliability is maintained up to 1,000k cycles; these results are validated by the simulation results.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.712-728
• /
• 2022

World-widely, there has never been a greater need for people to access high-quality expertise about the effective and safe use of medications. Therefore, the profession of pharmacy should meet these needs of the times, as the demographic shifts have led to a situation where older adults now outnumber children, and polypharmacy is also a commonplace. However, the reimbursement system covered by the National Health Insurance (NHI) in Korea is still limited to the traditional dispensing and compounding role of pharmacist. To provide a take-home message to Korean pharmacy reimbursement system, we aimed to review and analyze the international trends in pharmacy remuneration systems. This is a comparative study between Korea, Japan, the United Kingdom, and the United States. Comparison was conducted by reviewing each country's policy and enforcement programs, as well as the related literature. Japan, the UK and the US systems remunerate diverse patient-centered pharmaceutical care services. The Korean pharmacy service fee is, however, narrowly focused on the traditional product-oriented pharmacy services. This study discussed the future direction of improving pharmacist reimbursement systems in Korea, by expanding professional pharmacy service coverage and diversifying fee schedule.