• Transactions of Materials Processing
• /
• v.21 no.2
• /
• pp.131-137
• /
• 2012

With the advantages of power savings, increased life expectancy and fast response time over traditional incandescent bulb, LEDs are increasingly used for many applications including automotive, aviation, display, and special lighting applications. Since the high heat generation of LED chips can reduce service life, degrade luminous efficiency, and cause variation of color temperature, many studies have been carried out on the optimization of LED packaging and heat sinks. In this study, a fin expansion type cooling device using heat pipe, instead of a solid aluminum heat sink, was designed for LED security lightings based on thermal resistance analysis. Numerical analysis and experimental validation were carried out to evaluate its cooling performance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.769-772
• /
• 2008

For several years, many researchers have proposed LED backlight dimming technology for low power consumption and high contrast ratio. One of the major issues plaguing RGB LED with 2D dimming technology is color shift. This undesirable variation makes it difficult to use RGB LED as light sources in the backlight system. This paper describes the useful method of the optical feedback system for 2D dimming RGB LED backlight. The test results show that our proposed method is very suitable for the 2D dimming technology.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.1-5
• /
• 2020

By adapting black body leadflame and thin film type Green A filter, we successfully demonstrated night vision imaging system (NVIS) Green A compatible LED. Fabricated NVIS compatible LEDs show small form factor compared to that of commercialized NVIS compatible LED. Especially, NVIS radiance and chromaticity of MIL-STD-3009 specification can be satisfied simultaneously and easily by controlling the color temperature of the white LED as well as the concentration of the Green A dye and the thickness of the Green A filter. The optimal dye concentration of the NVIS Green A filter is expected to be about 1 wt%. The results of this study are expected to contribute to miniaturization, weight reduction and localization of avionic display and lighting devices.

• Journal of Environmental Science International
• /
• v.33 no.6
• /
• pp.383-402
• /
• 2024

Variations in lettuce growth and quality were observed depending on the type of artificial light source. The RGB LED treatment resulted in thick leaf development, leading to higher fresh weight, dry weight, and relative growth rates. Two cultivars, "Tomalin" and "seonpunggold," exhibited increased anthocyanin content and dark red leaf color under conditions of RGB LED treatment. Additionally, they exhibited high chlorophyll content under conditions of RGB LED and RGBFR LED treatments. Particularly, under Red LED treatment, the plants showed elongated leaves with narrow widths, resulting in a higher leaf shape index and a tendency towards leaf curling. Therefore, RGB LED lighting which appropriately blends red, blue, and green lights, is more effective than single lighr sources at improving lettuce growth and quality.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.951_952
• /
• 2009

기존의 소듐이나 메탈할라이드 램프는 수명이 짧아 잦은 유지보수가 필요하다. 8~12m정도의 도로조명은 유지보수 중에 사고가 발생할거나 교통의 흐름에 불편을 가져와 이에 대한 대책이 필요하다. LED조명장치는 반도체 특유의 장수명으로 유지보수의 문제에 솔루션을 가지고 있다. 또한 기존의 조명시스템은 단색으로 색온도의 제어가 어려워 기능성조명장치의 구현이 거의 이루어지고 있지 않지만 반도체조명 장치인 LED조명은 다양한 LED칩을 적절히 배치하고 활용함으로서 색온도를 가변시켜 우천시나 안개시에 운전자의 주의를 환기시킬 수 있어 도로안전을 확보할 수 있다. 본 논문에서는 백색LED와 오렌지LED를 혼색하여 우천시나 안개시, 즉, 습도의 변동상황에서 색온도를 가변시켜 운전자나 보행자의 시인성을 확보하고 통행의 주의를 환기시켜 기능성조명으로서의 역할을 부여하는 LED가로등조명장치를 구현하여 이에 대한 성능을 실험하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.55-58
• /
• 2004

Recently the examples of a lighting design with LED source have increased rapidly, but there are few researches that are related to selecting luminous colors by LED. The research is that respondents operated color blender and got preference colors according to what they made, the colors were measured by chroma meter and marking CIE 1931 chromaticity diagram. Through the results of the research has made group preference for luminous colors. From now on, not only does it seem capable of using a designing a building-lighting to which LED but it will be actively applied to controlling with a digital technology for lighting design.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.376-383
• /
• 2013

The design of the LEDs lighting in general household illumination was proposed and compared with the fluorescent lighting in this study. Using the LED as a light source would promote energy saving lighting for household illumination purposes. We used the LightTools and DIALux software to design and simulate different standards of illuminance, different correlated color temperatures and different color rendering indices for household environments. The power consumption and efficiency of traditional illuminated light sources and an LED light source with the same standard of illuminance for lighting the household environment were analyzed and compared with each other. Finally, our results show the advantages of using white-light LEDs for lighting and household illumination.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.44-51
• /
• 2011

In this paper, an easy-to-use measurement device for illumination distribution is developed. The device consists of a sensor array module, a control module, and a PC interface. The sensor array module incorporates CIE 1931 color sensors and the ARM-based 96 MHz microcontroller in the control module for measurement and data processing. The sensor array module contains 64 color sensors arranged in a $16{\times}4$ array. The sensitivity of the sensor array module can be adjusted depending on the illumination level to be measured. The measurement data and control signals are exchanged via USB 2.0 standard. To demonstrate the performance of the device, the illumination distribution is measured for colors of red, green, and blue and is graphically shown. The device can be used for measurement of the illumination distribution, design and adjustment of LED illumination.

• Journal of Mushroom
• /
• v.11 no.1
• /
• pp.24-31
• /
• 2013

As a result of advenced research, Penicillium growth inhibition effect in media of cauliflower mushroom by different LED lighting color inhibited all treated groups, but blue wavelength treatment group was unfitted for culture of cauliflower mushroom due to lots of spore of penicillium. So, to investigated characteristics of mycelial growth of cauliflower mushroom according to different LED wavelength and LED wavelength color. As a results, all red wavelength treatment groups found highest mycelial growth tendency. Thus, mycelial growth investigated different quantity of red lighting wavelength conditions. The quantity of lighting wavelength was low intention, 1.41 ${\mu}mol/m^2S$ treatment group found highest mycelial growth. Effects of mycelial growth by subculture found difference of statistical in one time to carry out a subculture treatment group. Mycelial growth by different quantity of LED lighting in different media composition of wood chip media indicated highest trend in the Korean pine treatment groups. To cultured treatment group for 84th days found difference of statistical, when a quantity of LED lighting red wavelength 2.11 ${\mu}mol/m^2S$ treated in wood chip of the Korean pine media. In conclusion, good culture condition of cauliflower mushroom estimated quantity of red lighting wavelength 2.11 ${\mu}mol/m^2S$ in wood chip media of the Korean pine for 84th days.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1415-1422
• /
• 2011

In this paper, full color billboards for the efficient expression of the resolution to offer dual-scanning control method, using the LED display it on a fixed pixel video signal to the pixel dot pattern was changed. And DICT(Dynamic Image Correction Technology) using the main controller in accordance with video information, histogram equalization of image gray scale values to be uniformly distributed, and dynamically improves image quality by converting the area, and a dual auto-scan input video switching controller board as the pixels in the LED Module by controlling the physical manifestation of the existing board LED pixel dots than 4 times the resolution proposes a technique that can be expressed and made it through testing verified the performance.