• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.330-339
• /
• 2014

Growth and anthocyanins of lettuce (Lactuca sativa L., 'Mid-season') grown under LED lamps with blue light in the range of 430-470 nm or with red light in the range of 630-670 nm were analyzed in this study. Cool-white fluorescent light was used a s the control. P hotosynthetic photon flux, p hotoperiod, air temperature, relative humidity, and $CO_2$ concentration in a closed plant production system were $201{\pm}2\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 16/8 hours (day/night), $22/18^{\circ}C$, 70%, and $400{\mu}mol{\cdot}mol^{-1}$, respectively. At 21 days after light quality treatment, growth characteristics and anthocyanins content of lettuce as affected by the peak wavelength of blue or red LED were significantly different. Among peak wavelengths treated in this stusy, R1 treatment (peak wavelength 634 nm) and R6 treatment (peak wavelength 659 nm) were effective for increasing leaf width, leaf area, shoot fresh weight, and photosynthetic rate of lettuce. B5 treatment (peak wavelength 450 nm) and B4 treatment (peak wavelength 446 nm) increased the anthocyanins concentration and chlorophyll content in lettuce leaves, respectively. Anthocyanins in lettuce leaves increased linearly with decreasing hue value of leaf color and with increasing SPAD value of lettuce leaves. From these results, it was concluded that the red LED with peak wavelengths of 634 nm and 659 nm and the blue LED with peak wavelengths of 450 nm can be used as potential light spectra for increasing the yield and anthocyanins accumulation of leafy vegetable.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.614-619
• /
• 2013

Recently, remote phosphor is reported for white LED enhancing of phosphor efficiency compared with conventional phosphor-based W-LED. In this study, Remote phosphor was produced by screen printing coating on glass substrate with phosphor contents rated paste and heat treatment. The paste consists of phosphor, lowest softening glass frit and organic binders. Remote phosphor can be well controlled by varying the phosphor content rated paste. After mounting remote phosphor on top of blue LED chip, CCT, CRI, and luminance efficiency were measured. The measurement results showed that CCT, CRI, and luminance efficiency were 6,645, 68, and 1,16l m/W in phosphor 80 wt.% remote phosphor sintered at $600^{\circ}C$.

• Korean Institute of Interior Design Journal
• /
• v.22 no.2
• /
• pp.58-67
• /
• 2013

The methods used in this study included investigation of media facades used for landmarks in downtown areas in previous studies, visits to these areas, and recording of media facades. The changes in the colors or the size of buildings were analyzed among the recorded cases and 12 of these cases were selected for further study. The sensibility preference of the media facades was evaluated by sorting the 12 kinds of media facades, and providing them as materials to a group of 60 participants (40 undergraduate and 20 graduate students majoring in architecture and design) consisting of an equal proportion of males and females. This study addressed the following four_stage questions: 1) Five questions of recognition evaluation about media facades and the cognitive evaluation items of emotional vocabulary and color preference in each research case; 2) sensibility preference items regarding the media facade color design; and 3) design evaluation items of the media facades; 4) Video clips and still images were recorded from a middle distance at 7p.m to 11p.m. in central New York, Singapore, Seoul, and Beijing. The participants looked at the changes in colors through the video clips in each case and evaluated their preferences through 23 pairs of emotional vocabulary items using system dynamics. Construction of an emotional vocabulary followed, based on previous studies about media facades and color design. To evaluate the sensibility preference and the perceived representative colors of the media facade, this study suggests new emotional responses that depended on the color emotional vocabulary of light in the LED lighting technical evaluation methodology. A media facade with a moving change of colors, unlike a fixed landscape color design, suggests a new communication method based on architectural factors. New architectural color coordination can be presented for urban landscapes at night. Designs that factor in the pedestrians' emotional vocabulary or preference should take precedence over the use of high luminance and various colors.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.282-289
• /
• 2019

Reflective and solar LED road studs are being used as a way of securing visibility for road environments. Road markers have various advantages and disadvantages in terms of versatility, efficiency, simplicity and visibility as individual products of reflective type and solar LED. However, in addition to the above, it is possible to prevent secondary accident after accident, It has a common drawback that it is difficult to have. In this paper, we propose a road stud system incorporating a wireless control function using RF - based communication with existing solar LED road studs and a system for controlling them. The proposed system is called the smart road stud system and it can control the equipment through the central control unit and the relay unit connected to the central control room by incorporating the RF communication function in the existing solar LED road stud. In addition, since it is possible to control the lighting method, color, etc. according to the road condition, it is possible to provide the driver with the state of the road to perform the function for preventing the second accident after the accident. It also adds features that minimize the ongoing power consumption of LED and RF communications. In order to verify the validity of the proposed system, prototypes were produced and it was confirmed that it is possible to act as a university for prevention of accident after accident by linking with other traffic system besides accident prevention function by securing existing visibility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.189-189
• /
• 2016

Recently, many researchers have shown an increased interest in colloidal quantum dots (QDs) due to their unique physical and optical properties of size control for energy band gap, narrow emission with small full width at half maxima (FWHM), broad spectral photo response from ultraviolet to infrared, and flexible solution processing. QDs can be widely used in the field of optoelectronic and biological applications and, in particular, colloidal QDs based light emitting diodes (QDLEDs) have attracted considerable attention as an emerging technology for next generation displays and solid state lighting. A few methods have been proposed to fabricate white color QDLEDs. However, the fabrication of white color QDLEDs using single QD is very challenging. Recently, hybrid nanocomposites consisting of CdTe/ZnO heterostructures were reported by Zhimin Yuan et al.[1] Here, we demonstrate a novel but facile technique for the synthesis of CdTe/ZnO/G.O(graphene oxide) quasi-core-shell-shell quantum dots that are applied in the white color LED devices. Our best device achieves a maximum luminance of 484.2 cd/m2 and CIE coordinates (0.35, 0.28).

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.53-62
• /
• 2016

This paper is shown the new method using LED Light, which the light environment is upgraded the natural LED light in the area of Disaster Prevention and Safety Management (PDSD), which the events of deaths is reduced on the Suicide, the Infectious diseases, the safety accidents, the Traffic Accident, the crime, the fire, the Nature Disaster, and which the health and the environment and the safety is implemented using the value of the color LED Light. Research findings include,during 3 weeks in the November 2016, in the ten residents (average living 28.7 years, age 67.5 years) with depressive symptoms in the northern part of Seoul, according to the request of the user, the PDSD natural light LED lighting was installed in the home bedroom or the living room, expectations for the ability to restore physical and mental stability were high (88%), in the same way, after 1 week and 3 weeks, the physical and mental changes were compared and the results,84% in the first week and 90% in the third week and thereafter, the effect of relieving depression was high. We conclude that patients with depression have a good sleep, an uneasy feeling, a sense of security, a good night's sleep, and a good feeling. The PDSD LED Light is expected to contribute in the various areas, which reduced the suicides, which give increased immunity from infectious diseases, which give a crash to reduce accidents caused by negligence, which improve the safe operation of heavy vehicles in which a traffics accident incidence installed on the highest point, which improve the safety function on the 'safety way home' for the safety of the community, which due to fire gives alleviate the emotional anxiety of firefighters, which improve the environment for long-term control room working during decision making caused by natural disasters.

• Korean Journal of Poultry Science
• /
• v.42 no.2
• /
• pp.125-132
• /
• 2015

The Far Infrared Ray (FIR) is part of the natural energy as light spectrum of sunlight. Human can disentangle the colors within visible ray, but FIR is invisible to human sight because it has longer wavelength than visible ray. The effect of using FIR on broiler performance, blood biochemical profiles and fecal gas emission from litter. Day-old semi-broiler chicks (Ross ♂ ${\times}$ Hyline ♀) were obtained and assigned to eight pens, 2 replicates of white and green color LED light, and with FIR on each color light, in a 20L:4D of lighting program. The body weight gain and feed efficiency were tend to improve under the green color than white color, which were increased by exposing to FIR on both color light. Emission of ammonia and lower hydrocarbons from litter were not different from each color but there was a decrease by exposing to FIR regardless of light color. The level of blood aspartate aminotransferase (AST) tends to be decreased under green color than white color, and this tendency becomes more pronounced as exposing to FIR. Therefore significantly increased under white color without FIR than green color with FIR (P<0.05). The levels of albumin and immunoglobulin were not different from each color but there was an increase by exposing to FIR regardless of light color. In conclusion, exposing to Far Infrared Ray (FIR) when broiler raising, there is potential to increase broiler performance because of improvement of bioactivity and raising environment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.7
• /
• pp.1044-1049
• /
• 2014

This study was conducted in order to investigate whether the presence of light or different colors of light would influence the energy expenditure and behavior of broiler chickens. Eight 8-week-old broiler chickens were adapted to a respiration chamber (Length, 28.5 cm; Height, 38.5 cm; Width, 44.0 cm) for one week prior to the initiation of the experiment. In experiment 1, energy expenditure and behavior of the chickens were analyzed in the presence or absence of light for four days. Chickens were exposed to 6 cycles of 2 h light/2 h dark period per day. In experiment 2, the broiler chickens that had been used in experiment 1 were used to evaluate the effect of 4 different wavelength light-emitting diodes (LEDs) on the energy expenditure and behavior of broiler chickens. The LEDs used in this study had the following wavelength bands; white (control), red (618 to 635 nm), green (515 to 530 nm) and blue (450 to 470 nm). The chickens were randomly exposed to a 2-h LED light in a random and sequential order per day for 3 days. Oxygen consumption and carbon dioxide production of the chickens were recorded using an open-circuit calorimeter system, and energy expenditure was calculated based on the collected data. The behavior of the chickens was analyzed based on following categories i.e., resting, standing, and pecking, and closed-circuit television was used to record these behavioral postures. The analysis of data from experiment 1 showed that the energy expenditure was higher (p<0.001) in chickens under light condition compared with those under dark condition. The chickens spent more time with pecking during a light period, but they frequently exhibited resting during a dark period. Experiment 2 showed that there was no significant difference in terms of energy expenditure and behavior based on the color of light (white, red, green, and blue) to which the chickens were exposed. In conclusion, the energy expenditure and behavior of broiler chickens were found to be strongly affected by the presence of light. On the other hand, there was no discernible difference in their energy expenditure and behavior of broiler chickens exposed to the different LED lights.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.3
• /
• pp.135-143
• /
• 2009

To study the behavioral reaction of common squid Todarodes pacificus, to different colors of LED light, individual distribution in the dark condition without LED light stimuli, individual distribution when four colors of light stimuli were at the sections of end and middle of water tank and the changes of gathering rates as the elapse of illuminating time were examined. When it was dark, the distribution of the fish in each section of the tank was U-shape regardless of the investigating time intervals, which means that Todarodes pacificus gathered at the both ends of the tank. The individual distribution when light stimuli were at the one end of the tank showed the tendency of gathering at the illuminated section and decreasing at the opposite section. There were 448 of them at the end of the tank when the light was blue, 352 when white, 302 when green and 132 when red. Thus the fish liked blue light the most, followed by white light. The variations of gathering rate at the both ends of tank as illuminating time elapsed showed the tendency of increasing at the light section (A section), however, it showed the tendency of decreasing at the darkest section (F section). The individual distribution showed the tendency of letter $\wedge$ of gathering at the center and decreasing at the both ends mostly when the light stimuli were at the middle section of tank. The gathering rates at the lighting section were 80.4% when red, 76.4% when white, 69.6% when green and 56.7% when blue. The fishes showed the affinity for the red light mostly, followed by the white light source. The red light and blue light showed the opposite when the light stimuli were at the one end of water tank. The variations of gathering rates as the elapse of time at the lighted section showed the tendency of gradual increasing in the four light sources. The color of light source showing the highest gathering rate within 25-30 minutes of light stimuli was the white, followed by the red.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.312-312
• /
• 2013

GaN based light emitting diodes (LEDs) are important devices that are being used extensively in our daily life. For example, these devices are used in traffic light lamps, outdoor full-color displays and backlight of liquid crystal display panels. To realize high-brightness GaN based LEDs for solid-state lighting applications, the development of p-type ohmic electrodes that have low contact resistivity, high optical transmittance and high refractive index is essential. To this effect, indiumtin oxide (ITO) have been investigated for LEDs. Among the transparent electrodes for LEDs, ITO has been one of the promising electrodes on p-GaN layers owing to its excellent properties in optical, electrical conductivity, substrate adhesion, hardness, and chemical inertness. Sputtering and e-beam evaporation techniques are the most commonly used deposition methods. Commonly, ITO films on p-GaN by sputtering have better transmittance and resistivity than ITO films on p-GaN by e-bam evaporation. However, ITO films on p-GaN by sputtering have higher specific contact resistance, it has been demonstrated that this is due to possible plasma damage on the p-GaN in the sputtering process. In this paper, we have investigated the advanced sputtering using plasma damage-free p-electrode. Prepared the ITO films on the GaN based LEDs by e-beam evaporation, normal sputtering and advanced sputtering. The ITO films on GaN based LEDs by sputtering showed better transmittance and sheets resistance than ITO films on the GaN based LEDs by e-beam evaporation. Finally, fabricated of GaN based LEDs by using advanced sputtering. And compared the electrical properties (measurement by using C-TLM) and structural properties (HR-TEM and FE-SEM) of ITO films on GaN based LEDs produced by e-beam evaporation, normal sputtering and advanced sputtering. As a result, It is expected to form plasma damage free-electrode, and better light output power and break down voltage than LEDs by e-beam evaporation and normal sputter.