• Journal of Sensor Science and Technology
• /
• v.27 no.3
• /
• pp.175-181
• /
• 2018

In this paper, we introduce a new dimming control method in a visible light communication (VLC) system wherein byteinversion is adopted for flicker-free transmission. In the VLC transmitter, the original and the inverted data were sent sequentially and the remnant time in one period was used for the dimming control of the LED light. In the VLC receiver, only the original data was recovered using the gating signal whose width was the same as the length of the original data. In our experiments, the dimming control ranges were measured to be 22%-53%, 11%-76%, and 5%-88% of the CW LED light when the data rates were 9.6, 19.2, and 38.4 kbps, respectively. In this system, we used a 240-Hz sync pulse whose period was 4.16 ms, which was shorter than the maximum flickering time period of 5 ms that is generally considered to be safe. This configuration is very simple and useful in constructing indoor wireless sensor networks using the flicker-free LED lamps with dimming control capability.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.663-671
• /
• 2014

LED lamp arrangement is a critical issue in indoor visible light communication (VLC) system. In this paper, we analyze the illumination distribution under the arrangement of $2{\times}3$ and propose a method to find the optimal lamp arrangement. The method, based on the MIMO (Multiple Input/Multiple Output) system model and taking the first order reflection into consideration, enables accurate analysis of the arrangement of the LED lamps for any room. The studies show that under the optimal arrangement the uniformity of illumination is improved from 0.55 to 0.86, which guarantees that users can get almost equal lighting effects, no matter where they locate themselves. At the same time, the RMS delay spread distribution which is used to evaluate the inter-signal-interference (ISI) is analyzed, and the simulation results indicate that the optimal arrangement also can improve the communication quality by reducing the fluctuation of the RMS delay spread.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.757-758
• /
• 2010

At the time of medical treatment and surgical operation, halogen lamp and plasma lamp were mainly used as luminous source for lighting. These two luminous sources have drawbacks that the life of lamps are not long, various problems are brought about due to excessive heat generation and its volume is very big because of cooling device. Accordingly, in this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance LED for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1038-1046
• /
• 2017

In this paper, we propose the design of LED Streetlight Platform with capabilities of weather monitoring and color temperature control. Several previous works are focused on the energy efficiency or data management of streetlight system, but no work has been done on the lighting performance, especially when natural phenomenon such as fog or haze appears on the street and obstructs the visibility of drivers and pedestrians. To solve such issue, we propose the use of two LED lamps with different correlated color temperature, which will be activated interchangeably according to the condition on the street. We also present the design of communication scheme between each devices in the system. Moreover, our experimental results show the LED Streetlight Platform can perform well and the data can be displayed properly at the website.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.486-492
• /
• 2020

The method for preparing a perovskite-type bismuth ferrite (BFO) photocatalyst which reacts to visible LED light and the characteristics of visible light photocatalysis were investigated. BFO was prepared according to the sol-gel method. The prepared BFO consisted mainly of BiFeO₃ structure and formed a nano-sized crystal including Bi₂₄Fe₂O₃₉ structure. The BFO nano crystallines were identified from the UV-visible diffuse reflectance spectra to absorb UV and visible light up to about 600 nm. The bandgap of the BFO determined from the diffuse reflectance spectrum was about 2.2 eV. Formaldehyde was decomposed by the photoreaction of BFO photocatalysts with the visible light LED lamps with wavelengths of 585 nm and 613 nm. The narrow bandgap of BFO led to elicit BFO photocatalytic activity in visible LED light.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.3
• /
• pp.138-144
• /
• 2010

Optical analysis is necessary to optimize light emitting diode (LED) safety street lighting. In this study, optical analysis was conducted for 100 W LED safety street lighting. Experimental research on such a single LED was the first undertaken. Simulation modeling based on the optical properties of the single LED has compared between average road illuminances and has them analyzed with Korean Industrial Standards for LED safety street lighting (KS C7658:2009). The simulation results demonstrated that the illumination performance (average road illuminance) was 75.3 lx at a height of 4 m and an area of $32\;m^2$, 45.25 lx at a height of 5 m and an area of $72\;m^2$, and 30.05 lx at a height of 6 m and an area of $128\;m^2$. 100 W safety street lighting (model CE180-ST-OS) designed by simulation was also compared between product and 100 W simulation modeling, and error rates averaged 5.6%. The 100 W LED safety street lighting base designed in simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100 W LED safety street lamp had reasonable performance. The design method for LED safety street lamps has been summarized based on the optical analysis.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.331-338
• /
• 2005

The rapid advances in high power light sources and arrays as encountered in incandescent lamps have induced dramatic increases in die heat flux and power consumption at all levels of high power LED packaging. The lifetime of such devices and device arrays is determined by their temperature and thermal transients controlled by the powering and cooling, because they are usually operated under rough environmental conditions. The reliability of packaged electronics strongly depends on the die attach quality, because any void or a small delamination may cause instant temperature increase in the die, leading sooner or later to failure in the operation. Die attach materials have a key role in the thermal management of high power LED packages by providing the low thermal resistance between the heat generating LED chips and the heat dissipating heat slug. In this paper, thermal transient characteristics of die attach in high power LED package have been studied based on the thermal transient analysis using the evaluation of the structure function of the heat flow path. With high power LED packages fabricated by die attach materials such as Ag paste, solder paste and Au/Sn eutectic bonding, we have demonstrated characteristics such as cross-section analysis, shear test and visual inspection after shear test of die attach and how to detect die attach failures and to measure thermal resistance values of die attach in high power LED package. From the structure function oi the thermal transient characteristics, we could know the result that die attach quality of Au/Sn eutectic bonding presented the thermal resistance of about 3.5K/W. It was much better than those of Ag paste and solder paste presented the thermal resistance of about 11.5${\~}$14.2K/W and 4.4${\~}$4.6K/W, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.959-966
• /
• 2015

In this paper, we propose an indoor visible light communication(VLC) localization using Walsh code which can identify overlapped signals transmitted from the different LED sources as each of orthogonal signal at a receiver and using Manchester code which can eliminate the flicker of LED light and maintain a constant brightness. The proposed system can estimate the relative position of the receiver by using Lambertian radiation properties and trilateration method that are applied to the location information of fixed LED sources and the received signals from them. In order to verify the feasibility of the proposed system, we carried out the simulation in an indoor space with $6{\times}6{\times}1.5m^3$ installed LED lamps of 16. The simulation result shows that the proposed method achieves an average positioning error of 0.0536 m and a maximum positioning error of 0.2977 m.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.23-23
• /
• 2003

GaN-related semiconductors are of great technological importance for the fabrication of optoelectronic devices, such as blue and ultra violet light emitting diodes (LEDs), laser diodes, and photo-detectors. One of the most important applications of GaN-based LEDs is solid-state lighting, which could replace incandescent bulbs and ultimately fluorescent lamps. For solid-state lighting applications, the achievement of high extraction efficiency in LED structures is essential. For flip-chip LEDs (FCLEDS), the formation of low resistance and high reflective p-GaN contact is crucial. So far, a wide variety of different methods have been employed to improve the ohmic properties of p-type contacts to GaN. For example, surface treatments using different chemical solutions have been successfully used to produce high-quality ohmic contacts, Metallization schemes, such as Ta/Ti contacts to p-GaN, were also investigated. For these contacts, the removal of hydrogen atoms from the Mg atoms doped n the GaN was argued to be responsible for low contact resistances.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.442-444
• /
• 2003

For the safety of aircraft, aviation obstacle lights must be attached to the transmission towers in accordance with the governing law. Aviation obstacle lights which consist of solar cells, batteries. xenon lamps and a regulator substituted for aviation obstacle lights using AC power. A xenon lamp has advantage such as high brightness but also has disadvantage like large power consumption which cause lighting system to have many solar cells and batteries. This paper introduces an application of a aviation obstacle light using LED lamp through the economic analysis between LED lamp and xenon lamp.