• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.45-45
• /
• 2019

This experiment was carried out using artificial clay and LED in the plastic film house (irradiation time: 08:00~18:00/day). Seedlings (n = 63 per $3.3m^2$) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity. The average air temperature from April to September was $12.3^{\circ}C$ $-26.0^{\circ}C$ and it was the the highest at $26.0^{\circ}C$ in August. The test area where fluorescent lamp was irradiated tended to be somewhat higher than the LED irradiation area. The chemical properties of the test soil are as follows. pH levels was 5.3~5.5, EC levels 0.45~0.52 dS/m and OM levels 33~37%. The total nitrogen content was 0.35~0.47% and the available $P_2O_5$ contents was 13.7~16.0 mg/kg, which was lower than the suitable level of 70~200 mg/kg. Exchangeable cations K and Mg contents were within acceptable ranges, but the Ca contents was $28{\sim}38cmol^+/kg$ levels higher than the permissible level ($2{\sim}6cmol^+/kg$). Germination of ginseng leaves took 8~9 days and the overall germination rate was 70~75%. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PAR (Photosynthetic Action Radiation) value, illuminance and solar irradiation. Photosynthetic rate was also increased with higher light intensity was investigated at $1.7{\sim}3.2{\mu}mol\;CO_2/m^2/s$. Leaf temperature ($23.7{\sim}24.8^{\circ}C$) by light intensity was the same trend. The growth of aerial parts (plant height etc.) were generally excellent when irradiated with 3 times the light intensity, the growth of the ginseng aerial parts were excellent as follows. The plant height was 42.6 cm, stem length was 25.2 cm, leaf length was 9.6 cm and stem diameter was 5.0 mm. The growth of underground part (root length etc.) was the same, and the root length was 24.4 cm, the tap root length was 6.0 cm, diameter of taproot was 18.2 mm and the fresh root weight was 17.2 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping off occurred 2.2~3.6% and incidence ratio of rusty root ginseng was 14.6~20.7%. Leaf discoloration rate was 13.7~48.9% and increased with increasing light intensity. Ginsenoside content of ginseng by light intensity is under analysis.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.351-356
• /
• 2015

Visible light communication (VLC) is considered to be an attractive scheme to realize the broadband wireless communication for an indoor environment. We present a room division multiplexing (RDM) mechanism for an indoor multi-room VLC network, which utilizes the spatial position of the LED lamp in different rooms as a novel dimension of network resource for multiplexing, and thus the network capacity is increased. In such a network, the service interruption caused by user cross-room movement is an important problem, and we propose a double-area-positioning based cross-room switch solution. An experimental platform demonstrates the RDM-deployed VLC network, and validates the performance of the presented switch mechanism.

• 한국결정성장학회지
• /
• 제17권3호
• /
• pp.108-112
• /
• 2007

광원에 따라 색상이 변화하는 cubic zirconia 단결정을 skull melting 법으로 성장하였다. Co와 Nd에 의해서 황색 영역의 강한 흡수가 일어나며, Fe에 의해 보라색 영역의 흡수가 일어남에 따라 광원이 형광등에서 백열등으로 변화할 때 청-녹색에서 적-자색으로 변화가 발생한다. 첨가물에 의해서 뿐만 아니라 yttria 함량과 열처리 조건 변화에 의해서도 결정의 색이 변화하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1623-1626
• /
• 2005

The thiogallate phosphors which are well known for a long time as phosphor materials for CRT or EL device were reported. Those have high luminescent properties at long-wavelength region. Among those phosphors, the samples with divalent europium doped CaGa2S4 were prepared by a simple process under the reduction atmosphere $(5%\;H_2/\;95%\;N_2)$ without toxic gas such as H2S or CS2. The prepared phosphor shows a higher luminescent efficiency (about 120%) than that of $YAG:Ce^{3+}$ phosphor. Consequently, this phosphor is possible to be applicable to white LED lamp because of the high luminescent efficiency.

• 한국조명전기설비학회지:조명전기설비
• /
• 제19권1호
• /
• pp.15-21
• /
• 2005

이제까지 주로 LCD가 대화면화가 진행될 때 CCFL의 기술 개발 동향을 살펴 보았다. CCFL lamp는 LCD module의 BLU에서 광원으로 중요한 자리를 차지해 왔고, 원가 절감 및 성능향상이라는 목표로 지속적으로 기술 개발이 되어 왔다. 하지만 현재 LCD TV가 FPD 시장의 주도적인 역할을 하기 위해서 혁신적인 기술 개발이 요구되어서 EEFL, FFL, LED 광원, CNT 광원 등의 다양한 형태의 광원이 CCFL의 자리를 넘보고 있는 실정이다. 이에 CCFL 메이커들 또한 다른 광원들의 장점을 CCFL 내에서 구현하고, 자신만이 가지고 있는 기술로 주력광원으로서의 자리를 잃지 않기 위해 기술 개발이 더욱 빠르게 이루어져 가고 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1398-1400
• /
• 2002

A new PLF-BLU (Plastic Light Fiber-Back Light Unit) using side glowing light fiber rods array for the 42" LCD TV display has been evelopedd. The light fibers were 14mm in diameter and 50cm long pure transparent acrylic rods of 1.49 refractive index. Fine seratees were made on the flat side of rod. extremely bright incandscent light from lamp fed into the fiber si scattered at scratches then emerges through the surface of rod. A typical PLF-BLU system consists of 24 PLFs produced side glow of brightness of 4,500cd/㎡ to 6,500cd/㎡. New PLF-BLU is proved to be a BLU of rigid, bright, no heat generation, and low power consumption, hence a prospective BLU system for very and/or ultra large size TVs. A new LED-PLF-BLU system considered to be a revolutionary to break-through of the BLU technologies has also been developed, and is decribed briefly.

• 조명전기설비학회논문지
• /
• 제20권1호
• /
• pp.7-18
• /
• 2006

본 연구는 한강교량의 야간경관조명에 관한 조명연출효과를 분석하기 위해 한강교량 8곳을 대상으로 경관조명 현황을 조사하였다. 선행연구를 통해 교량의 경관조명에 있어서 중요한 조명학적물리량 평가요소로 '휘도대비', '색상', '색온도'를 선정하였다. 디지털 광학 계측기인 Radiant Imaging Prometric 1400에 의해 측정된 휘도 색온도 색도분포 등의 물리량 분석결과, '교량의 구조형식' 및 '조명광원'이 한강교량의 야간경관조명의 물리적 특징에 큰 영향을 미치는 요소로 나타났으며, 특히 '교량의 구조형식'에 따라 강조하는 경관조명의 패턴이 유사하게 나타났다.

• 센서학회지
• /
• 제29권1호
• /
• pp.27-32
• /
• 2020

This study proposes a pixel-patterning method for organic light-emitting diodes (OLEDs) based on thermal transfer. An infrared lamp was introduced as a heat source, and glass type donor element, which absorbs infrared and generates heat and then transfers the organic layer to the substrate, was designed to selectively sublimate the organic material. A 200 nm-thick layer of molybdenum (Mo) was used as the lightto-heat conversion (LTHC) layer, and a 300 nm-thick layer of patterned silicon dioxide (SiO₂), featuring a low heat-transfer coefficient, was formed on top of the LTHC layer to selectively block heat transfer. To prevent the thermal oxidation and diffusion of the LTHC material, a 100 nm-thick layer of silicon nitride (SiN_x) was coated on the material. The fabricated donor glass exhibited appropriate temperature-increment property until 249 ℃, which is enough to evaporate the organic materials. The alpha-step thickness profiler and X-ray reflection (XRR) analysis revealed that the thickness of the transferred film decreased with increase in film density. In the patterning test, we achieved a 100 ㎛-long line and dot pattern with a high transfer accuracy and a mean deviation of ± 4.49 ㎛. By using the thermal-transfer process, we also fabricated a red phosphorescent device to confirm that the emissive layer was transferred well without the separation of the host and the dopant owing to a difference in their evaporation temperatures. Consequently, its efficiency suffered a minor decline owing to the oxidation of the material caused by the poor vacuum pressure of the process chamber; however, it exhibited an identical color property.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.276-280
• /
• 2016

This study investigated luring distributions by water layer of common squid which were targeted by angling fishing vessels equipped with LED and metal-halide lamps using a scientific echosounder with a 120 kHz frequency in order to develop energy-effective underwater fish aggregation devices. In the analysis, angles of a transducer were changed from $0^{\circ}$ to $45^{\circ}$ and were rotated every $10^{\circ}$ horizontally. It was shown that common squid were densely distributed from the surface to 40 m and they were also distributed in directions of $10^{\circ}{\sim}+30^{\circ}$, $-30^{\circ}{\sim}-60^{\circ}$, and $-120^{\circ}{\sim}-130^{\circ}$with the head of vessel as the center. Comparative results of angles of transducer on acoustical densities of common squid distributing in 21~40 m water depth showed an average $101.8m^2/nm^2$ in vertical direction of $0^{\circ}$, $12.3m^2/nm^2$ in angle of $30^{\circ}$, and $42.4m^2/nm^2$ in angle of $45^{\circ}$, respectively. It implied that more considerations on acoustic scattering strength by incidence angle direction of the transducer and swimming oriental angle direction of common squid would be required.

• 한국물환경학회지
• /
• 제40권1호
• /
• pp.19-35
• /
• 2024

The global pandemic, coronavirus disease caused by Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has led to the implementation of wastewater surveillance as a means to monitor the spread of SARS-CoV-2 prevalence in the community. The challenging aspect of establishing wastewater surveillance requires a well-equipped laboratory for wastewater sample analysis. According to previous studies, RT-PCR-based molecular tests are the most widely used and popular detection method worldwide. However, this approach for the detection or quantification of SARS-CoV-2 from wastewater demands a specialized laboratory, skilled personnel, expensive instruments, and a workflow that typically takes 6 to 8 hours to provide results for a few samples. Rapid and reliable alternative detection methods are needed to enable less-well-qualified practitioners to set up and provide sensitive detection of SARS-CoV-2 within wastewater at regional laboratories. In some cases, the structural and molecular characteristics of SARS-CoV-2 are unknown, and various strategies for the correct diagnosis of COVID-19 have been proposed by research laboratories. The ongoing research and development of alternative and rapid technologies, namely RT-LAMP, ELISA, Biosensors, and GeneXpert, offer a wide range of potential options not only for SARS-CoV-2 detection but also for other viruses. This study aims to discuss the effective regional rapid detection and quantification methods in community wastewater.