• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.142-147
• /
• 2006

소자가 발광하는 형태를 가지며 매우 작은 크기의 광원인 LED는 특유의 형태 때문에 자체의 발광특성을 점광원으로 가정하여 부가적인 광학제품들이 설계되어 왔다. 하지만, 실제적인 설계에서는 이러한 점광원으로의 가정에서 오차를 불러일으킬 수 있으며, 세밀한 제어를 요구하는 조명시스템의 제어에서는 작은 오차라 해도 큰 에러를 발생시킬 수 있다. 따라서 본 논문에서는 점광원이 아닌 실제적인 부피를 지니는 광원으로서의 LED를 분석하여 그에 대한 2차적인 광학 시스템의 설계법을 제시하고자한다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.550-551
• /
• 2014

A discrete time domain modeling and analysis for the peak current controlled (PCC) buck LED driver is presented in this paper. The design guidelines and experimental results for the PCC buck LED driver are presented.

• Journal of Plant Biotechnology
• /
• v.41 no.3
• /
• pp.123-126
• /
• 2014

This paper is suitable for household plant factory by design and using both energy-saving LED and solar technology. Conventional household plant factory only depending on natural sunlight is sensitive for the change of external environment. Another a big problem of conventional common household plant factory is large power consumption. Recently interest in wellbeing food such as chemical-free is increased abruptly. To solve these two problems, this paper describes hybrid type of household plant. In particular, reducing the power photosynthesis photon flux density (PPFD) is kept uniform to enhance the growth of the plant. Ambient light sensor is adopted for the control of proper combination of sunlight and LED to keep PPFD constant.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.425-428
• /
• 2009

Silicone is recently used for LED chip encapsulment due to its good thermal stability and optical transmittance. To mold a solid-state silicone encapsulment, curing by mixing at elevated temperatures followed by cooling is necessary. As the silicone molding process is involved in healing and subsequent cooling, the thermal residual stress, which causes mechanical warpage or optical birefringence in the final silicone encapsulment, may be induced if there are non-uniformities in cured silicone material properties or encapsulment shape design. The prediction of residual stress is necessary to design a high-quality silicone molding process. Therefore, in the present paper, a numerical parametric study was attempted to evaluate the heating and cooling effects on the thermal residual stress induced in the cured silicone.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.739-744
• /
• 2016

We have designed a new TIR(Total Internal Reflection) structure for generating an LED lens which can produce a rectangular beam with small divergence angle in two perpendicular directions for an optical guidance system. The lens can control the divergence angle in the horizontal direction to be a small value of about $8^{\circ}$ with a $1mm{\times}1mm$ LED source, also in the vertical direction it can be about $7^{\circ}$, with optical collection efficiency higher than 0.83. After the lens is manufactured, the work demonstrates that the lens is suitable for an optical guidance system.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2196-2198
• /
• 2005

The luminous intensity distribution of a 1W high-power LED with a wide view angle should be concentrated to be used as a light source for an automotive reading lamp. In this paper, an optical lens made of PMMA is simulated by using an optical design software for that purpose. As the result, with the help of the devised lens, the reading light gives over 80 lx at the center of a target surface of radius of 0.2m located below 0.5m from the lamp, and a minimum of 20 lx at the perimeter of the target surface. Thus, a 1W high-power LED with an appropriate lens would suffice for an automotive reading lamp.

• KIEAE Journal
• /
• v.8 no.6
• /
• pp.21-26
• /
• 2008

According to the tendency of energy efficiency and environment-friendly chracteristics, demend of High-efficiency lighting using LED(Light Emitting Diode)are being increased actively and applied in various fields. However, In order to adequate application of LED light sources, it is necessary to lighting environment and luminous characteristics of LED light sources. This Study aims to characterize the work-plane lighting environment by LED light sources comparing with fluorescent light sources which are widely used. For the sake of this study, a fluorescent light source and 5 LED light sources were introduced and luminance and correlated color temperature were measured to evaluate luminance contrast. The experimental model is Mock-up which is $4.9m{\times}7.2m$ with a height of 2.9m. The test room was set up partition and desks. Luminance and correlated color temperature were measured work-plane on the desk which was set up local lighting by the Radiant Imaging ProMetric 1400. The optical characteristics data of LED can give a lot of advantages to design LED lighting appliances. Hereafter, the object of research will be conducted to evaluate effects of LED light sources on working performance, survey of visual performance, preference and physiology of subjects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.594-599
• /
• 2014

The heat dissipation conditions of high-power 5 watt LEDs-based searchlight modules were optimized with varying LED bar'shape, materials, and ambient temperature. The LED junction temperature was estimated by using Computational Fluid Dynamics simulation. The optimal heat dissipation conditions were found as follows; LED bar' shape: L=80 mm, W=4 mm, t=10 mm, copper material, LED junction temperature of $116.6^{\circ}C$, ambient temperature of $50^{\circ}C$, total mass of 184 g, and shadowing area of $320mm^2$. The difference between the junction temperatures of our fabricated and simulated LEDs-based searchlight modules is about $3^{\circ}C$, which confirms the validity of our thermal simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.954-964
• /
• 2015

In this research, an overlapped illumination model was newly proposed for designing a freeform LED lens with a uniform illuminance distribution on its illuminating plane. Based on the proposed model and conventional illumination models, freeform lenses were designed and their performances and tolerances were compared. As a result of the tolerance analysis about thickness change in lens, position, size change, central direction change of light emission and characteristic change in LED source. This proposed model and divergent illumination model are similar to the performance about central direction change of light emission in LED source. but the uniformity illumination value in this proposed model is more remarkably value than it in divergent illumination model about characteristic change in LED source.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.1-9
• /
• 2010

An LED driving and control circuit has been developed. The LED driver has a new PWM circuit for current control of LED columns with dimming, current and thermal control, and communication functions. The PWM circuit is composed of two ring oscillator and one counter which can be constructed using basic digital logic components. In addition, it has the functions of remote control mode such as ON, OFF, emergency and power saving modes by the serial communication. The PWM generator and control circuit have been designed and fabricated 0.35[${\mu}m$] Magnachip/Hynix digital IC fabrication process. The LED driving and control board using the developed chip is fabricated and tested successfully.