• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.142-147
• /
• 2006

소자가 발광하는 형태를 가지며 매우 작은 크기의 광원인 LED는 특유의 형태 때문에 자체의 발광특성을 점광원으로 가정하여 부가적인 광학제품들이 설계되어 왔다. 하지만, 실제적인 설계에서는 이러한 점광원으로의 가정에서 오차를 불러일으킬 수 있으며, 세밀한 제어를 요구하는 조명시스템의 제어에서는 작은 오차라 해도 큰 에러를 발생시킬 수 있다. 따라서 본 논문에서는 점광원이 아닌 실제적인 부피를 지니는 광원으로서의 LED를 분석하여 그에 대한 2차적인 광학 시스템의 설계법을 제시하고자한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.550-551
• /
• 2014

A discrete time domain modeling and analysis for the peak current controlled (PCC) buck LED driver is presented in this paper. The design guidelines and experimental results for the PCC buck LED driver are presented.

• Journal of Plant Biotechnology
• /
• 제41권3호
• /
• pp.123-126
• /
• 2014

This paper is suitable for household plant factory by design and using both energy-saving LED and solar technology. Conventional household plant factory only depending on natural sunlight is sensitive for the change of external environment. Another a big problem of conventional common household plant factory is large power consumption. Recently interest in wellbeing food such as chemical-free is increased abruptly. To solve these two problems, this paper describes hybrid type of household plant. In particular, reducing the power photosynthesis photon flux density (PPFD) is kept uniform to enhance the growth of the plant. Ambient light sensor is adopted for the control of proper combination of sunlight and LED to keep PPFD constant.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.425-428
• /
• 2009

Silicone is recently used for LED chip encapsulment due to its good thermal stability and optical transmittance. To mold a solid-state silicone encapsulment, curing by mixing at elevated temperatures followed by cooling is necessary. As the silicone molding process is involved in healing and subsequent cooling, the thermal residual stress, which causes mechanical warpage or optical birefringence in the final silicone encapsulment, may be induced if there are non-uniformities in cured silicone material properties or encapsulment shape design. The prediction of residual stress is necessary to design a high-quality silicone molding process. Therefore, in the present paper, a numerical parametric study was attempted to evaluate the heating and cooling effects on the thermal residual stress induced in the cured silicone.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.739-744
• /
• 2016

We have designed a new TIR(Total Internal Reflection) structure for generating an LED lens which can produce a rectangular beam with small divergence angle in two perpendicular directions for an optical guidance system. The lens can control the divergence angle in the horizontal direction to be a small value of about $8^{\circ}$ with a $1mm{\times}1mm$ LED source, also in the vertical direction it can be about $7^{\circ}$, with optical collection efficiency higher than 0.83. After the lens is manufactured, the work demonstrates that the lens is suitable for an optical guidance system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2196-2198
• /
• 2005

The luminous intensity distribution of a 1W high-power LED with a wide view angle should be concentrated to be used as a light source for an automotive reading lamp. In this paper, an optical lens made of PMMA is simulated by using an optical design software for that purpose. As the result, with the help of the devised lens, the reading light gives over 80 lx at the center of a target surface of radius of 0.2m located below 0.5m from the lamp, and a minimum of 20 lx at the perimeter of the target surface. Thus, a 1W high-power LED with an appropriate lens would suffice for an automotive reading lamp.

• KIEAE Journal
• /
• 제8권6호
• /
• pp.21-26
• /
• 2008

According to the tendency of energy efficiency and environment-friendly chracteristics, demend of High-efficiency lighting using LED(Light Emitting Diode)are being increased actively and applied in various fields. However, In order to adequate application of LED light sources, it is necessary to lighting environment and luminous characteristics of LED light sources. This Study aims to characterize the work-plane lighting environment by LED light sources comparing with fluorescent light sources which are widely used. For the sake of this study, a fluorescent light source and 5 LED light sources were introduced and luminance and correlated color temperature were measured to evaluate luminance contrast. The experimental model is Mock-up which is $4.9m{\times}7.2m$ with a height of 2.9m. The test room was set up partition and desks. Luminance and correlated color temperature were measured work-plane on the desk which was set up local lighting by the Radiant Imaging ProMetric 1400. The optical characteristics data of LED can give a lot of advantages to design LED lighting appliances. Hereafter, the object of research will be conducted to evaluate effects of LED light sources on working performance, survey of visual performance, preference and physiology of subjects.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.594-599
• /
• 2014

The heat dissipation conditions of high-power 5 watt LEDs-based searchlight modules were optimized with varying LED bar'shape, materials, and ambient temperature. The LED junction temperature was estimated by using Computational Fluid Dynamics simulation. The optimal heat dissipation conditions were found as follows; LED bar' shape: L=80 mm, W=4 mm, t=10 mm, copper material, LED junction temperature of $116.6^{\circ}C$, ambient temperature of $50^{\circ}C$, total mass of 184 g, and shadowing area of $320mm^2$. The difference between the junction temperatures of our fabricated and simulated LEDs-based searchlight modules is about $3^{\circ}C$, which confirms the validity of our thermal simulation results.

• 한국정보통신학회논문지
• /
• 제19권4호
• /
• pp.954-964
• /
• 2015

본 연구는 균일한 조명을 얻기 위해 자유 형상 렌즈(freeform lens)를 제작하였으며, 이를 위해 중첩 조명 모델(overlapped illumination model)을 제안하였고, 제작한 LED 렌즈들의 특성을 분석하였다. 제작한 렌즈는 LED 빛 세기 분포의 중심 방향, 반치각 (half angle) 및 LED 광원의 위치변화를 바탕으로 그 성능을 평가하였다. 아울러 조명영역은 평균 조도 (average illuminance)와 조도 균일도 (illuminance uniformity) 변화 값으로 수행하였다. 광도 분포의 중심 방향 변화에 대해서는 제안된 모델과 발산 모델이 대체로 비슷한 공차 특성을 보였으며, 특히 제작한 렌즈에서 반치각 변화는 기존 방법에 비해 조도 균일도 공차 특성은 현저히 개선됨을 확인하였다.

• 조명전기설비학회논문지
• /
• 제24권4호
• /
• pp.1-9
• /
• 2010

LED구동회로및 제어회로를 개발하였다. 개발된 LED구동회로는 새로운 PWM회로를 가지고 있으며 LED열의 디밍, 전류 및 온도제어 및 통신 기능을 할 수 있다. 개발된 PWM회로는 기본적인 디지털 논리소자를 사용하여 만들어 질 수 있는 두 개의 링 발진기와 한 개의 카운터로 구성되어 있다. 부가적으로 이 회로는 온-오프 제어 모드, 비상모드, 전력절감모드를 가지고 있으며 직열통신을 이용해서 제어된다. 설계 된 PWM 발생기와 제어회로는 마그나칩/하이닉스의 디지털 공정을 이용하여 제작되었다. 제작된 칩은 LED구동장치와 제어기 보드에 장착되어 테스트 되었으며 성공적으로 동작하였다.