• 제목/요약/키워드: LED AP

검색결과 43건 처리시간 0.031초

PREVENTION OF CANCER BY DIETARY FACTORS: TARGETING MAP KINASE/AP-1 SIGNAL TRANSDUCTION PATHWAYS

  • Dong, Zigang
    • 한국독성학회:학술대회논문집
    • /
    • 한국독성학회 2001년도 International Symposium on Dietary and Medicinal Antimutgens and Anticarcinogens
    • /
    • pp.29-30
    • /
    • 2001
  • MAP kinase/ AP-1 signal transduction components are rapidly initiated by many extracellular stimuli, especially environmental carcinogens. We have investigated the role of MAP kinases (Erks, JNKs, and p38 kinases) and AP-1 signal transduction pathways in the process of cell transformation and carcinogenesis. Incubation of Cl 41 cells with tumor promoters such as TPA, EGF, arsenic, or TNF-$\alpha$ led to cell transformation and activation of MAP kinases.(omitted)

  • PDF

HALOGEN LIGHT CURING UNIT 과 LIGHT EMITTING DIODES CURING UNIT 을 이용하여 중합되어진 복합레진의 마모 특성 비교 (Wear Of Resin Composites Polymerized By Conventional Halogen Light Curing And Light Emitting Diodes Curing Units)

  • 이권용;김환;박성호;정일영;전승범
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1057-1060
    • /
    • 2004
  • In this study, the wear characteristics of five different dental composite resins cured by conventional halogen light and LED light sources were investigated. Five different dental composite resins of Surefil, Z100, Dyract AP, Fuji II LC and Compoglass were worn against a zirconia ceramic ball using a pin-on-disk type wear tester with 15 N contact force in a reciprocal sliding motion with sliding distance of 10 mm/cycle at 1Hz under the room temperature dry condition. The wear variations of dental composite resins were linearly increased as the number of cycles increased. It was observed that the wear resistances of these specimens were in the order of Dyract AP > Surefil > Compoglass > Z100 > Fuji II LC. On the morphological observations by SEM, the large crack formation on the sliding track of Fuji II LC specimen was the greatest among all resin composites. Dyract AP showed the least wear with few surface damage. There is no significant difference in wear performance between conventional halogen light curing and light emitting diodes curing sources. It indicates that a light emitting diodes (LED) source can replace a halogen light source as a curing unit for composite resin restorations.

  • PDF

Anti-inflammatory activity of AP-SF, a ginsenoside-enriched fraction, from Korean ginseng

  • Baek, Kwang-Soo;Hong, Yong Deog;Kim, Yong;Sung, Nak Yoon;Yang, Sungjae;Lee, Kyoung Min;Park, Joo Yong;Park, Jun Seong;Rho, Ho Sik;Shin, Song Seok;Cho, Jae Youl
    • Journal of Ginseng Research
    • /
    • 제39권2호
    • /
    • pp.155-161
    • /
    • 2015
  • Background: Korean ginseng is an ethnopharmacologically valuable herbal plant with various biological properties including anticancer, antiatherosclerosis, antidiabetic, and anti-inflammatory activities. Since there is currently no drug or therapeutic remedy derived from Korean ginseng, we developed a ginsenoside-enriched fraction (AP-SF) for prevention of various inflammatory symptoms. Methods: The anti-inflammatory efficacy of AP-SF was tested under in vitro inflammatory conditions including nitric oxide (NO) production and inflammatory gene expression. The molecular events of inflammatory responses were explored by immunoblot analysis. Results: AP-SF led to a significant suppression of NO production compared with a conventional Korean ginseng saponin fraction, induced by both lipopolysaccharide and zymosan A. Interestingly, AP-SF strongly downregulated the mRNA levels of genes for inducible NO synthase, tumor necrosis factor-${\alpha}$, and cyclooxygenase) without affecting cell viability. In agreement with these observations, AP-SF blocked the nuclear translocation of c-Jun at 2 h and also reduced phosphorylation of p38, c-Jun N-terminal kinase, and TAK-1, all of which are important for c-Jun translocation. Conclusion: Our results suggest that AP-SF inhibits activation of c-Jun-dependent inflammatory events. Thus, AP-SF may be useful as a novel anti-inflammatory remedy.

Characteristics of accumulated soil carbon and soil respiration in temperate deciduous forest and alpine pastureland

  • Jeong, Seok-Hee;Eom, Ji-Young;Park, Ju-Yeon;Lee, Jae-Ho;Lee, Jae-Seok
    • Journal of Ecology and Environment
    • /
    • 제42권1호
    • /
    • pp.20-29
    • /
    • 2018
  • Background: For various reasons such as agricultural and economical purposes, land-use changes are rapidly increasing not only in Korea but also in the world, leading to shifts in the characteristics of local carbon cycle. Therefore, in order to understand the large-scale ecosystem carbon cycle, it is necessary first to understand vegetation on this local scale. As a result, it is essential to comprehend change of the carbon balance attributed by the land-use changes. In this study, we attempt to understand accumulated soil carbon (ASC) and soil respiration (Rs) related to carbon cycle in two ecosystems, artificially turned forest into pastureland from forest and a native deciduous temperate forest, resulted from different land-use in the same area. Results: Rs were shown typical seasonal changes in the alpine pastureland (AP) and temperate deciduous forest (TDF). The annual average Rs was $160.5mg\;CO_2\;m^{-2}h^{-1}$ in the AP, but it was $405.1mg\;CO_2\;m^{-2}h^{-1}$ in the TDF, indicating that the Rs in the AP was lower about 54% than that in the TDF. Also, ASC in the AP was $124.49Mg\;C\;ha^{-1}$ from litter layer to 30-cm soil depth. The ASC was about $88.9Mg\;C\;ha^{-1}$, and it was 71.5% of that of the AP. The temperature factors in the AP was high about $4^{\circ}C$ on average compared to the TDF. In AP, it was observed high amount of sunlight entering near the soil surface which is related to high soil temperature is due to low canopy structure. This tendency is due to the smaller emission of organic carbon that is accumulated in the soil, which means a higher ASC in the AP compared to the TDF. Conclusions: The artificial transformation of natural ecosystems into different ecosystems is proceeding widely in the world as well as Korea. The change in land-use type is caused to make the different characteristics of carbon cycle and storage in same region. For evaluating and predicting the carbon cycle in the vegetation modified by the human activity, it is necessary to understand the carbon cycle and storage characteristics of natural ecosystems and converted ecosystems. In this study, we studied the characteristics of ecosystem carbon cycle using different forms in the same region. The land-use changes from a TDF to AP leads to changes in dominant vegetation. Removal of canopy increased light and temperature conditions and slightly decreased SMC during the growing season. Also, land-use change led to an increase of ASC and decrease of Rs in AP. In terms of ecosystem carbon sequestration, AP showed a greater amount of carbon stored in the soil due to sustained supply of above-ground liters and lower degradation rate (soil respiration) than TDF in the high mountains. This shows that TDF and AP do not have much difference in terms of storage and circulation of carbon because the amount of carbon in the forest biomass is stored in the soil in the AP.

Halogen Light Curing Unit과 Light Emitting Diodes Curing Unit을 이용하여 중합되어진 복합레진의 마멸 특성 비교 (Wear of Resin Composites Polymerized by Conventional Halogen Light Curing and Light Emitting Diodes Curing Units)

  • 이권용;김환;박성호;정일영;전승범
    • Tribology and Lubricants
    • /
    • 제21권6호
    • /
    • pp.268-271
    • /
    • 2005
  • In this study, the wear characteristics of five different dental composite resins cured by conventional halogen light and LED light sources were investigated. Five different dental composite resins of Surefil, Z100, Dyract AP, Fuji II LC and Compoglass were worn against a zirconia ceramic ball using a pin-on-disk type wear tester with 15N contact force in a reciprocal sliding motion of sliding distance of 10mm/cycle at 1Hz under the room temperature dry condition. The wear variations of dental composite resins were linearly increased as the number of cycles increased. It was observed that the wear resistances of these specimens were in the order of Dyract AP > Surefil > Compoglass > Z100 > Fuji II LC. On the morphological observations by SEM, the large crack formation on the sliding track of Fuji II LC specimen was the greatest among all resin composites. Dyract AP showed less wear with few surface damage. There is no significant difference in wear performance between conventional halogen light curing and light emitting diodes curing sources. It indicates that a light emitting diodes (LED) source can replace a halogen light source as curing unit for composite resin restorations.

치아 충전용 복합레진의 광중합 광원 종류에 따른 마멸 비교 (Wear Of Dental Restorative Composite Resins Cured by Two Different Light Sources)

  • 김환;이권용;박성호;정일영;전승범
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2004년도 학술대회지
    • /
    • pp.350-354
    • /
    • 2004
  • In this study, the wear characteristics of five different dental composite resins cured by conventional halogen light and LED light sources were investigated. Five different dental composite resins of Surefil, Z100, Dyract AP, Fuji II LC and Compoglass were worn against a zirconia ceramic ball using a pin-on-disk type wear tester with 15 N contact force in a reciprocal sliding motion of sliding distance of 10 mm/cycle at 1Hz under the room temperature dry condition. The wear variations of dental composite resins were linearly increased as the number of cycles increased. It was observed that the wear resistances of these specimens were in the order of Dyract AP > Surefil > Compoglass > Z100 > Fuji II LC. On the morphological observations by SEM, the large crack formation on the sliding track of Fuji ?LC specimen was the greatest among all resin composites. Dyract AP showed less wear with few surface damage. There is no significant difference in wear performance between conventional halogen light curing and light emitting diodes curing sources. It indicates that a light emitting diodes (LED) source can replace a halogen light source as curing unit for composite resin restorations.

  • PDF

가시광 통신을 이용한 실내 사용자 단말 탐지 시스템 (Performance of Indoor Positioning using Visible Light Communication System)

  • 박영식;황유민;송유찬;김진영
    • 디지털콘텐츠학회 논문지
    • /
    • 제15권1호
    • /
    • pp.129-136
    • /
    • 2014
  • Wi-Fi fingerprinting 시스템은 실내에서 사용되는 위치 측위 방법이며 AP(Access Point)에서 발생하는 RSS(Received Signal Strength)에 의존한다. AP로부터의 RSS는 벽, 장애물 그리고 사람에 의한 간섭과 다중경로 페이딩 효과에 의하여 변할 수 있기 때문에 Wi-Fi fingerprinting 시스템은 낮은 측위 정확도를 갖는다. 또한, Wi-Fi 신호는 벽을 통과하기 때문에 기존의 시스템은 사용자가 현재 위치해 있는 층을 구분하기 어렵다. 이러한 단점을 극복하기 위하여 본 논문은 정확한 실내 측위를 위한 LED fingerprinting 시스템을 제안한다. 제안된 시스템은 LED로부터 발생하는 LED-ID와 LED의 광 파워를 사용한다. 본 시스템의 Training 단계에서는 각 장소에 해당하는 Fingerprinting을 데이터베이스에 기록한다. Serving 단계에서는 K-NN(K-Nearest Neighbor) 알고리즘을 적용하여 기존의 데이터와 새롭게 수신되는 사용자의 데이터를 비교한다. 컴퓨터 시뮬레이션을 통해 CDF(Cumulative Distribution Function) 형태로 본 시스템의 성능을 나타내었고, 시뮬레이션 결과로부터 제안된 시스템은 평균 측위 정확도보다 8.6% 높은 정확도를 얻을 수 있다.

노지 고추재배지에 발생하는 총채벌레를 대상으로 methyl isonicotinate와 집합페로몬 혼합물을 이용한 고효율 대량유살 기술 (High Efficient Mass-trapping Technique using a Mixture of Methyl Isonicotinate and Aggregation Pheromone to Control the Thrips Infesting Hot Peppers in Open Field Conditions)

  • 김용균;진가현;박현제;김철영
    • 한국응용곤충학회지
    • /
    • 제62권4호
    • /
    • pp.245-253
    • /
    • 2023
  • 대량유살 기술을 통한 총채벌레 방제 기술이 시설 고추재배지를 중심으로 개발되었다. 이 기술의 핵심 요인은 효과적 유인제 개발에 있다. 집합페로몬에 의존하였던 유인전략은 노지 재배지에서는 뚜렷한 효과를 보이지 않았다. 따라서 본 연구는 노지 고추재배지에서 총채벌레의 대량 유살을 위해 새로운 유인물질의 추가가 필요하였다. 또한 노지재배지에서 집합페로몬의 유인력 감소 원인을 규명할 필요가 있었다. 새로운 유인물질로서 methyl isonicotinate (MIN)이 제시되었고, 이 물질이 실내 유인행동분석을 통해 총채벌레에 대한 자체 유인력은 물론이고 집합페로몬과 협력효과를 보였다. 이를 바탕으로 집합페로몬과 혼합물 형태로 노지 고추재배지에서 분석한 결과 총채벌레의 포획밀도를 증가시켰다. 특히 이러한 증가는 꽃노랑총채벌레(Frankliniella occidentalis)에서 뚜렷하게 나타났다. 유인트랩에 집합페로몬의 함량 증가는 노지 고추재배지에서 꽃노랑총채벌레는 물론이고 다른 총채벌레류의 포획밀도를 뚜렷하게 증가시켰다. 본 연구는 집합페로몬 유인력이 시설재배지와 노지재배지 사이에서 차이가 있으며, 노지 재배지의 경우 효과적 유인력을 발휘하기 위해서는 더욱 많은 집합페로몬 함량을 요구한다는 것을 밝혔다. 또한 본 연구는 집합페로몬에 MIN을 추가하여 꽃노랑총채벌레에 대한 고효율 유인제를 개발할 수 있는 기술을 제시한다.

Using AP2RC & P1RB micro-silica gels to improve concrete strength and study of resulting contamination

  • Zahrai, Seyed Mehdi;Mortezagholi, Mohamad Hosein;Najaf, Erfan
    • Advances in concrete construction
    • /
    • 제4권3호
    • /
    • pp.195-206
    • /
    • 2016
  • Today, application of additives to replace cement in order to improve concrete mixes is widely promoted. Micro-silica is among the best pozzolanic additives which can desirably contribute to the concrete characteristics provided it is used properly. In this paper, the effects of AP2RC and P1RB micro-silica gels on strength characteristics of normal concrete are investigated. Obtained results indicated that the application of these additives not only provided proper workability during construction, but also led to increased tensile, compressive and flexural strength values for the concrete during early ages as well as ultimate ones with the resulting reduction in the porosity lowering permeability of the micro-silica concrete. Furthermore, evaluation of microbial contamination of the mentioned gels showed the resultant contamination level to be within the permitted range.