• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.395-397
• /
• 2013

항로표지는 해상에서 선박의 안전한 항행에 필수적인 요소이며, 현재는 LED를 광원으로 사용하는 등명기를 개발 및 사용하고 있다. LED 멀티롤 랜턴을 개발하여 항로표지의 표체조명, 교량표지, 방파제 표시등 등으로 개발하고하는 연구가 진행되고 있다. 이를 위하여 LED 멀티롤 랜턴의 내부 LED 배치에 따른 배광특성을 분석하였다. 본 논문에서 멀티롤 랜턴은 아크릴 환봉과 설치를 위한 금속재로 구성하였으며, 내부에 LED를 2열로 배치하였다. 최적의 설계를 위하여 아크릴 환봉을 투명한 것과 유백색인 것으로 구분하고 2열의 LED 모듈에 집광렌즈($45^{\circ}$, $60^{\circ}$, 미설치)에 따른 배광특성을 분석하였다. $60^{\circ}$ 집광렌즈를 사용한 경우의 시인효과가 우수하여 이를 바탕으로 LED 멀티롤 랜턴을 최종적으로 설계하였다. 투명 아크릴 환봉에 2열의 LED를 배치하고, $60^{\circ}$ 집광렌즈를 사용한 평판형 및 v형의 2종과 집광렌즈를 사용하지 않은 v형 1종으로 선정하고, 녹색과 홍색으로 제작하여 LED의 배열에 따른 배광특성을 본석하였다.

• Journal of Applied Biological Chemistry
• /
• v.62 no.2
• /
• pp.181-186
• /
• 2019

The optimum design of LED device for irradiation of 460 nm blue light on extruded rice cake using simulation and the effect of the blue light on the inactivation of Bacillus cereus (B. cereus) group on the rice cake were investigated. The irradiated light intensity patterns on the surface area of the sample were simulated with three different LED arrays (centered, cross, and evenly spaced) and at various distances (22, 32, 42 mm) between the LED modules and the sample. In addition, the uniformity was calculated as Petri factor. The evenly spaced array resulted the most uniform light intensity pattern in the simulation, and the Petri factor of 32 and 42 mm of the distances showed higher than 0.9, which represents the ideal uniformity of LED device. The bacterial population of the rice cake decreased to less than the initial bacterial population during exposure to LED blue light, whereas the bacterial population of the control sample increased. The bacterial count of the rice cake after blue light irradiation for 24 h was 1.21 log CFU/g lower than the control sample. Petri factor increased with increase of the distance between the light source and sample, however, the reduction rate of B. cereus group decreased. Therefore, the design of LED device, that represented the Petri factor higher than 0.9 and inactivated the population of B. cereus group, with evenly spaced and 32 mm of distance between the light source and sample was suitable for extending shelf-life of rice cake.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.3
• /
• pp.127-131
• /
• 1984

The IOVMM(Incoherent Optical Vector Matrix Multiplier) is constructed, which can process much information very fast by incogerent light source, and its experimental results are compared with the theoretical values. The input vector and matirx elements are limited to the positive number in this paper. The input vector is made by the LED array and the matrix is encoded on the film by the area modulation method. The result of the vector-matrix multiplication is detected by the photodiode array through the lens system. The analog multiplexer is used for looking at output signal on one channel.

• Korean Journal of Optics and Photonics
• /
• v.26 no.4
• /
• pp.226-232
• /
• 2015

A double-layer LED array together with an illumination optical system is proposed as a possible light source for LC projection display systems for large screens, up to $8m{\times}6m$ (400 inches diagonal). The heat dissipation problem of the LED array is solved by arranging the LEDs in double layers, and thermal analysis shows its effectiveness. The light from the LEDs in the back layer can be transmitted through the front layer without significant loss by arranging the LEDs in non-overlapping positions in the two layers and inserting suitable microlenses between the two layers and holes in the first layer. Together with the double-layer LEDs, an illumination optical system is designed to illuminate liquid crystal panels with good uniformity and appropriate matching with the projection optics.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1661-1662
• /
• 2006

고출력 LED의 전기적 광학적 열적인 특성을 분석한 결과를 토대로 MCPCB를 사용하지 않고 전구 형태의 좁은 면적에 고출력 1W LED를 배열하고, 적외선 카메라와 ICEPAK(열유동해석 프로그램)을 이용하여 14개의 LED 배열에 대한 LED 전구의 최적방열 및 기구 설계를 실시하였다. LED 전구에 대한 정전압과 정전류 제어방식의 고효율 구동회로를 제작하여, 약 70% 이상의 회로 효율과 약 95% 이상의 고역률, 약 20lm/W 이상의 고효율 LED 전구를 실현하였다. 정전압 구동회로는 동작시간에 무관하게 일정한 광출력을 나타내며, 정전류 구동회로는 초기 시동시 높은 광출력을 나타내고 동작시간의 경과에 따라 광출력 감소율이 높게 나타냄을 알 수 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.20-26
• /
• 2004

In this paper, luminaire optical efficiency and luminous intensity according to array of HB(high brightness) white LED(light emitting diode) and globe types of luminaire were simulated by computer and made a comparative analysis. LEDs were arranged by square of 7ea X 7ea. LED space has been divided into 8.2mm, 10mm and 15mm that mean distances between luminous centers of LEDs, and luminaire globes were classified into 30mm and 50mm 묘묘 from luminous center of LEDs. Also the simulations were made with / without globe, globe types were specified by convex and embossing types of which sizes are 8.2mm and 5.0mm, So total 27 classes of simulation were performed. This paper is to help luminire development using LED light source called digital lighting of 21th century, by studying luminire effciency and luminous intensity of different types of globes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1117-1125
• /
• 2011

In this paper, as a study of the simple visible light communication(VLC) with LED light, the visible light communication system that are made up with the $3{\times}3$ white LED array for visible light transmission, various photodiodes for visible light reception, and a non-carrier NRZ-OOK modulation scheme is designed and implemented to have a 115.2 kbps data speed at 2.5 m distance between transmitter and receiver. For the performance analysis of the developed VLC system, the maximum distance between VLC transmitter and receiver on the conditions of various transmission speeds, the number of LED array, or the various kind of LED and photodiode is obtained, and various performances are analyzed by experiments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.54-60
• /
• 2013

Numerical analysis of the radiant heat characteristic around heatsink according to arrangement and shape of fin on 60W-LED lamp is conducted in this study. In the case of top blow blowing from upper side on LED lamp, there is just little difference in cooling characteristics according to the height of fin. On the other hand, the fin arranged side by side has the advantage of heat transfer enhancement by comparing with zig-zag type because it leads to more loss of flow. In case of making fin round to increase the amount of heat transfer, designing arrangement with the minimized loss of flow has the advantage of characteristic.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.10a
• /
• pp.25-27
• /
• 1984

Using LED sources, the system that performs optical logic function of the input data arrays will be presented. Sixteen possible functions of two binary data arrays, such as AND, OR, NOR and XOR are simply obtained in parallel by controlling LED switching mode. Experimental result and some examples of application will be given.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1718-1719
• /
• 2011

본 논문은 LED를 이용한 치과 치료용 장비의 모듈 제작 시뮬레이션 실험 논문이다. Auto CAD를 사용하여 모델링하며, Photo-Pia 소프트웨어로 실험을 진행 한다. LED 모듈은 직선으로 배열하며, 빛의 확산을 방지하기 위해 반사판의 모양은 타원의 형태로 제작한다. LED의 광원의 Spec. 및 반사판의 Tilt Angle 변화를 통해 기존의 치과 치료용 장비와 비교 분석을 하며, COMSOL Multiphysics를 통해 열 해석을 한다. 그 결과, 시뮬레이션을 통해 실제 제작 하지 않고 유사한 결과를 도출할 수 있다.