• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.541-544
• /
• 2002

The reflective liquid crystal(LC) imager in one panel Liquid Crystal on Silicon(LCoS) System must have the properties such as fast response time, high contrast ratio(C/R) and voltage holding ratio(VHR) which are more related to the lifetime of imager than the others. As the high-output light including a short wavelength from UHP lamp is exposed to LCoS imager, the indium metal impurities, which decrease the C/R and VHR, are diffused from ITO thin film on glass. To ensure the high reliable LCoS imager for HD projection TV, we have studied the effects of the plasma treatment on ITO film to reduce impurities in imager.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.218-221
• /
• 2002

We have successfully developed the high performance flexible thin film diode device for flexible plastic film LCD. For flexible LCD, TFD device must be normally operated under any deformation state. Two type devices, Ti/Ta$_2$O$\sub$5//Ta and Al/Ta$_2$O$\sub$5//Al were fabricated and the symmetry and reliability of those were estimated under various measurement conditions including severely bending states.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.647-647
• /
• 1998

(La,Sr)CoO3/Pb(Zr,Ti)O3/(La,Sr)CoO3 (LSCO) heterostructures have been grown on LaAlO3 substrates by pulsed laser deposition (PLD) to investigate asymmetric polarization of Pb(Zr,Ti)O3 (PZT) thin flims with different electrode configuration. P-V hysteresis loop of LSCO/PZT/LSCO was symmetric. However, LaCoO3 (LCO_/PZT/LSCO showed a largely asymmetric P-V hystersis loop and large relaxation of the remanent polarization at the negatively poled state, which means that the negatively poled state was unstable. On the other hand, LSCO/PZT/LCO exhibited large relaxation of the positively poled state. The asymmetric behavior of the polarized states implies the presence of an interal electric firld inside the PZT layer. It is suggested that internal electric field is caused by built-in voltages at LCO/PZT and LSCO/PZT interfaces. The built-in voltages at LCO/PZT and CSCO/PZT interfaces were 0.6 V and -0.12 V, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.685-688
• /
• 2008

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.295-298
• /
• 2003

Reflective mode liquid crystal on silicon (LCoS) microdisplay is the major technology that can produce extremely high-resolution displays. A very large number of pixels can be packed onto the CMOS circuit with integrated drivers that can be projected to any size screen. Large size direct-view thin film transistor (TFT) LCDs becomes very difficult to make and to drive as the information content increases. However, the existing LC alignment technology for the LCoS cell fabrication is still the mechanical rubbing method, which is prone to have minor defects that are not visible normally but can be detrimental if projected to a large screen. In this paper, application of photo-alignment to LCoS fabrication is presented. The alignment is done by three-step exposure process. A MTN $90^{\circ}$ mode is chose as to evaluate the performance of this technique. The comparison with rubbing mode shows the performance of photo-alignment is comparable and even better in some aspect, such as sharper RVC curve and higher contrast ratio.