• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.213-216
• /
• 2007

LGP (light guide plate) of LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of the major components which affects the product quality of LCD. In the present study, the optical patterns of LGP(2.2") are manufactured by three different methods, namely, laser ablation, chemical etching and LiGA - reflow, respectively. The pattern surface images and roughness of mold and product were compared to check the optical characteristics. From the results of measurement the optical patterns fabricated by LiGA - reflow method showed the best geometric structure as intended in design and the lowest roughness among those.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.376-382
• /
• 2008

본 논문에서는 LCD(liquid crystal display)에서의 모션 블러 현상을 저감 시킬 수 있는 scanning backlight unit을 면광원을 사용하여 설계 및 제작 하였다. 면광원은 그 구조의 단순함과 BLU(backlight unit) 조립성과 구동의 간편성으로 인해 차세대 BLU의 신규 광원으로 각광 받고 있다. 램프 휘도를 제어하기 위하여 스캔 구동 시 램프의 on-time을 조절하였으며 실험결과 램프 휘도가 선형적으로 변화되고 넓은 범위의 휘도 제어가 가능함을 확인하였다.

• 한국광학회지
• /
• 제10권1호
• /
• pp.27-31
• /
• 1999

DuPont 社의 광폴리머를 홀로그램 기록매질로 사용하여, 반사형 LCD에 적용할수 있는 단색의 홀로그래픽 반사판을 설계 및 제작하였다. 홀로그램 동작파장을 514nm로 하여 기록함으로써, 녹색 영역에서 가장 밝은 이미지를 구현할 수 있었다. 이미지의 방행을 표면방사와 분이시킴으로써 높은 콘트라스트 미를 얻을수 있는데, 제작한 홀로그래픽 반사판을 TN-LC cell에 적용하여, 6:1의 on/off 콘트라스트 비를 얻었다.

• 산업공학
• /
• 제17권spc호
• /
• pp.131-140
• /
• 2004

The purpose of this paper is to develop and show the efficiency of the URL(Unload Request Logic) and LRL(Load Request Logic) of the dispatcher in the Fab(Fabrication) Manufacturing Execution System. These logics are the core procedures which control the material(wafer and glass substrate) flow efficiently in the semiconductor and LCD fab considering inter-bay as well as intra-bay material flow. We use the present and future status information of the system by look-ahead and the information about the future transportation schedule of Automated Guided Vehicles. The simulation results show that the URL and LRL presented in this paper reduce the average lead time, average and maximum WIP level, and the average available AGV waiting time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1530-1533
• /
• 2005

We investigated under-gate type carbon nanotube field emitter arrays (FEAs) for back light unit (BLU) in liquid crystal display (LCD). Gate oxide was formed by wet etching of ITO coated glass substrate instead of depositing $SiO_2$ on the glass substrate. Wet etching is easer and simpler than depositing and etching of thick gate oxide to isolate the gate metal from cathode electrode in triode. Field emission characteristic s of triode structure were measured. The maximum current density of 92.5 ${\mu}A/cm^2$ was when the gate and anode voltage was 95 and 2500 V, respectively at the anode-cathode spacing of 1500 ${\mu}m$.

• 한국광학회지
• /
• 제20권2호
• /
• pp.118-122
• /
• 2009

PET 필름 위에 LCD 백라이트의 프리즘 집광시트의 역할을 대체 할 수 있는 microlens array(MLA) 시트를 설계하고 제작하였다. Photoresist thermal reflow 공정으로 두께 $100{\mu}m$ PET 필름 위에 MLA를 제작하였고, 노광 시간과 reflow의 온도, 시간 등의 변수에 따른 MLA의 형상 변화를 측정하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.280-283
• /
• 2004

Micro-lens patterned micro-mold fabrication method for Light Guiding Plate(LGP), kernel part of LCD-BLU(Back Light Unit), was presented. Instead of erosion dot pattern for LGP optical design, micro-lens pattern, fabricated by LIGA-reflow process, was applied. Optical pattern design method was also developed not only for negative pattern LGP, but also positive pattern LGP. During injection molding process, experimental study was conducted to improve replication quality and brightness of ${\sim}50um$ micro-lens pattern mold. The effect of mold temperature for the replication quality of micro-lens array was studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.411-414
• /
• 2005

We have developed a transflective liquid crystal display (LCD) with a single cell gap and a low twisted nematic (LTN) mode in combination with a self-integrated retardation layer. The retardation layer was made of UV curable liquid crystalline material in one step of photo masking process and has both the homeotropic and the planar parts. The proposed transflective configuration has advantages in a simple fabrication process, and the possibility for a single driving scheme due to the similarity between the transmittance and the reflectance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.357-360
• /
• 2005

A novel wide viewing angle flexible liquid crystal display will be demonstrated. The crossed matrix-type micro-cell structure was adopted in this design. The LC domains were divided into four different tilted directions by the combination effect of pixel fringe field and crossed matrix type micro-cell. It can create four domains without rubbing process and form the cell gap without spacer. For flexible color fabrication, a novel inkjet printing technology is adopted. This cost effective wide viewing angle color flexible LCD technology can be a good solution for high performance flexible LCD.

• Journal of the Optical Society of Korea
• /
• 제13권4호
• /
• pp.478-483
• /
• 2009

An optical sheet with a cone array is designed, simulated, and fabricated in order to substitute the dual crossed prism sheets in the edge-type LCD backlight. The optimum structure of cone textures that is compatible with the dual crossed prism sheets was obtained by simulating the backlight installed with the cone array optical sheet. A SU-8 photoresist films of thickness $30{\sim}50{\mu}m$ were spin-coated on a polyethylene terephtalate film (PET), and the cone texture array was formed by using the diffuse lithography that employed a photomask with circular patterns and an optical diffuser.