• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.310-317
• /
• 2008

Data collision in LR-WPAN(Low Rate Wireless Personal Area Network) causes retransmission of which energy consumption may reduce life of the entire network. Furthermore LR-WPAN is very sensitive to collision as it has relatively fewer frequencies of backoff retries. LCS(Limited Contention Scheme) suggested in this study is a way to transmit data by certain groups of the total nodes so that it can reduce possibilities of data collision and retransmission by decreasing the number of competing nodes. As a result LCS can increase a throughput and the life of the entire network. As using LCS in designing LR-WPAN in the future can extend battery life, LCS can be useful in any application that requires low energy consumption.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.904-911
• /
• 2011

This paper deals with transmission characteristics of a new dual resonant structure for designing waveguide band-pass filter. The structure which has a pass-band between two adjacent stop-bands in a single body consists of circular ridged aperture and four armed conducting patch. The dual resonant behavior of the structure can be represented by a combination of LC series and parallel resonant circuits. Also these resonant properties can be easily controlled by varying the geometry of the aperture and four armed conducting patch. Actually, the structure is fabricated on the microstrip substrate by use of etching technique so that it is formed an iris type resonator which can be easily put into the transverse plane of the waveguide. We use WR-90 standard waveguide, adapters, and VNA(vector network analyzer) to measure the resonant characteristics of the structure. It is very useful to design and to improve the cutoff skirts characteristics in the waveguide band-pass filter design area.

• Annual Conference on Human and Language Technology
• /
• 2017.10a
• /
• pp.330-332
• /
• 2017

개체명 인식(Named Entity Recognition, 이하 NER)은 인명(PS), 기관명(OG), 장소(LC), 날짜(DT), 시간(TI) 등에 해당하는 개체명에 일정한 태깅 값을 주어 그 정보를 가시화하는 작업이다. 한국어 개체명 인식은 아직 그 자질이 충분히 밝혀져 있지 않아 자연어 처리 분야의 발전을 더디게 하는 한 요소로 작용하고 있다. 한국어가 음절 기반으로 단어를 형성하고 비교적 어순이 자유롭다는 특성이 있기에, 이런 특징을 잘 포착할 수 있는 "음절 기반의 Convolutional Neural Network(CNN)"의 아키텍쳐를 제안하여 66.80%의 성능을 보였다. 이 방법을 사용하면 형태소 분석등 개체명 이전 단계에서 발생하는 오류에 의해 개체명 인식(NER)의 성능이 떨어지는 문제를 해결할 수 있고, 조사나 어미 등을 제거하기 위한 후처리를 생략할 수 있다.

• 한국어정보학회:학술대회논문집
• /
• 2017.10a
• /
• pp.330-332
• /
• 2017

개체명 인식(Named Entity Recognition, 이하 NER)은 인명(PS), 기관명(OG), 장소(LC), 날짜(DT), 시간(TI) 등에 해당하는 개체명에 일정한 태깅 값을 주어 그 정보를 가시화하는 작업이다. 한국어 개체명 인식은 아직 그 자질이 충분히 밝혀져 있지 않아 자연어 처리 분야의 발전을 더디게 하는 한 요소로 작용하고 있다. 한국어가 음절 기반으로 단어를 형성하고 비교적 어순이 자유롭다는 특성이 있기에, 이런 특징을 잘 포착할 수 있는 "음절 기반의 Convolutional Neural Network(CNN)"의 아키텍쳐를 제안하여 66.80%의 성능을 보였다. 이 방법을 사용하면 형태소 분석등 개체명 이전 단계에서 발생하는 오류에 의해 개체명 인식(NER)의 성능이 떨어지는 문제를 해결할 수 있고, 조사나 어미 등을 제거하기 위한 후처리를 생략할 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.627-628
• /
• 2008

We have studied the optical performance of flexible polymer network liquid crystal (PNLC) films at various bending states. Different measurement setups, wide and narrow opening angles of detector, were used to collect scatting light of PNLC films. The optical and dynamic properties of bent PNLC implied the change of LC domains.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.8
• /
• pp.42-51
• /
• 1998

An 8th-order elliptic low-pass filter with cutoff frequency of 3.13kHz is presented. The design procedure is based on teh 1/s impedance transformation which is applied to a minimum capacitor LC ladder network.The tranformed network is implemented with resistors and high Q frequency-dependent negative resistors (FDNR's). The high Q FDNR is realized with two transadmittance amplifiers. Detailed SPICE simulations show that the iflter has pass-band ripple of 0.18dB, stop-band attenuation over 100dB, cutoff frequency of 3.13 khz, and cutoff frequency temperature coefficient of 8.5ppm/.deg. C at supply voltage of .+-.5V.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2000

The characteristics of liquid crystal polymer composite(LCPC) films are possessed of large-area and flexible display, polarizer free, high contrast, wide angle of visual filed and high responsiveness. It is well known that the LCPC films consisting of a continuous LC phase embeded in a three-dimentional network of polymer matrix are formed by photopolymerization-induced phase separation. In this study, we have investigated the point that both liquid crystals and polymer having different properties have to coexiste as composed films. The purpose of this study has been the development of new application with liquid crystals and UV-curable monomers. In the results abtained on the miscibility of nematic liquid crystal and UV-curable resins, difunctional monomer HX-620 turned out to shows the best. From the results abtained on structures, electro-optical properties and dynamic visocoelasticity for LCPC films, the best mixing ratio of monomer to LC mixture were 3/7(photoinitiator; 4wt%) by weight, and this ratio has been provided the most thermal stability for LCPC films. In the results abtained on structure and discoloration properties of LCPC films, it has been demonstrated that consiste of a 8:2 mixture of chiral nematic liquid crystal and HX-620 has the greatest domain and it was the best discoloration.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.156-161
• /
• 2004

The MMIC cascode VCO is designed, fabricated, and measured for Ku-band Low Noise Blcok(LNB) system using InGaP/GaAs HBT technology. The phase noise of -116.4 dBc/Hz at 1 MHz offset with output power of 1.3 dBm is obtained at 11.526 GHz by applying 3 V and 11 mA, which is comparatively better characteristics than compared with the different configuration VCOs fabricated with other technologies. The simulated results of oscillation frequency and second harmonic suppression agree with the measured results. The phase noise is improved due to the use of the smallest value of inductor in frequency determining network and the InGaP ledge function of the technology. The chip size of $830\time781\;{\mu}m^2$ is also achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.318-324
• /
• 1997

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, a linear resistor, and a nonlinear resistor. In this papre we analyze a circuit obtained by replacing the parallel LC resonator in the Chua's circuit by lossless transmission line. By using the method of characteristics of this circuit we show that various periodic motions and chaotic motions can the attained according to parameter variations. From Chua's circuit with a lossless transmission line a variely of chaotic attractors which are similar to those of the normal Chua's circuit are observed.