• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.341-342
• /
• 2008

The dynamics of nano particles in LC medium under an external electric field is of theoretical and technological interest. In this work, the dynamical characteristics of fullerene $(C_{60})$ particles in liquid crystal (LC) medium under dc electric field have been investigated. This effect was studied for homogeneously aligned nematic LC cells driven by in-plane field. The $C_{60}$ was found to be aggregated in a form of cluster inside the LC medium. Hence polystytene was used to protect the aggregation of $C_{60}$ in LC medium. When the electric field was applied, the fullerenes start to move in direction of applied electric field. The density of $C_{60}$'s particles at the electrodes increase with increase in the value of applied electric field. The dynamical motions of fullerene $(C_{60})$ particles in liquid crystal (LC) suggest that fullerene can be designed for electrophoretic displays (i.e., electronic ink).

• Composites Research
• /
• 제30권6호
• /
• pp.350-355
• /
• 2017

Phenylcyclohexyl (PCH) mesogen을 diglycidyl terephthalate의 2,5 위치에 치환시킨 새로운 액정성 에폭시 수지를 설계하였다. 이 물질의 액정성은 DSC(differential scanning calorimetry)와 POM(polarized optical microscopy)으로 분석하였다. 모든 액정성 에폭시 유도체는 가열 및 냉각 시에 모두 smectic상을 나타내는 enantiotropic한 성질을 나타내었다. 액정성 에폭시의 공융 혼합물을 통하여 액정 온도구간을 확장시켰다. 경화된 신규 액정성 에폭시는 $0.4W{\cdot}m^{-1}{\cdot}K^{-1}$의 높은 열전도도를 나타냈다. 높은 열전도도를 갖는 신규 액정성 에폭시는 전자 및 디스플레이용 복합소재로 이용될 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.370-370
• /
• 2007

The liquid crystal (LC) aligning capabilities treated on the Organic overcoat thin film surfaces by ion beam irradiation and rubbing method was successfully studied for the first time. The Organic overcoat layer was coated by spin-coating. In order to characterize the LC alignment, the microscope, pretilt angle, thermal stress, and atomic force microscopy (AFM) image was used. The good LC aligning capabilities treated on the Organic overcoat thin film surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1200 eV can be achieved. But, the alignment of defect of NLC on the Organicovercoat surface at low energy density of 600 eV was measured. The pretilt angle of NLC on the Organic overcoat thin film surface with ion beam exposure of $45^{\circ}$ for 1 min at energy density of 1800eV was measured about 1.13 degree. But, low pretilt angles of NLC on the Organic overcoat thin film surface with ion beam exposure at energy density of 600, 1200, 2400, and 3000 eV was measured. Also, the pretilt angle of NLC on the rubbed Organic overcoat thin film surfaces was measured about 0.04 degrees. Finally, the good thermal stability of LC alignment on the Organic overcoat thin film surface with ion beam exposure of $45^{\circ}$ for 1 min can be measured.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.58-65
• /
• 2022

The field of liquid crystal display (LCD) is constantly in the spotlight and the process of depositing an alignment layer in the LCD manufacturing process is very important to obtain excellent performance such as low-power driving and high-speed response to improve LCD performance. Therefore, research on liquid crystal (LC) alignment is being actively conducted. When manufacturing LCD, it is necessary to consider the effect of the alignment layer thickness as one of the factors affecting various LCD performances. In addition, previous studies confirmed the LC alignment characteristics correlate with the rotation speed in the spin coating process. Therefore, the electro-optical properties of the LCD were investigated by manufacturing a polyimide alignment layer by varying the rotation speed in the spin coating process in this study. It was confirmed that the thickness of the polyimide alignment layer was controlled according to the spin coating conditions. The average transmittances of anti-parallel LC cells at the spin coating speed of 2,500 rpm and 3,000 rpm are about 60%, which indicates that the LC cell has relatively higher performance. At the spin coating speed of 3,000 rpm, the voltage-transmittance curve of twisted nematic (TN) LC cell was below 1.5 V, which means that the TN LC cell operated at a low power. In addition, high-speed operating characteristics were confirmed with a response time of less than 30 ms. From these derived data, we confirmed that the ideal spin coating speed is 3,000 rpm. And these results provide an optimized polyimide alignment layer process when considering enhanced future LCD manufacturing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.280-281
• /
• 2006

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a Titanium dioxide ($TiO_2$) thin film by rf magnetron sputtering system for 15min under various rf power. A very low pretilt angle by ion beam exposure on the $TiO_2$ thin film was measured. A good LC alignment by the ion beam alignment method on the $TiO_2$ thin film surface was observed at annealing temperature of $200^{\circ}C$, and the alignment defect of the NLC was observed above annealing temperature of $250^{\circ}C$. Consequently, the low NLC pretilt angle and the good thermal stability of LC alignment by the ion beam alignment method on the $TiO_2$ thin film by sputter method as various rf power condition can be achieved.

• 한국수산과학회지
• /
• 제27권5호
• /
• pp.529-534
• /
• 1994

해역에 오염을 일으킬 것으로 예상되는 Micropollutants로서 크롬, 구리, 아연, 수은, 카드뮴 및 LAS를 택하여 서해안의 대표적인 유용 어종인 조피볼락, 넙치 및 숭어에 대한 급성독성실험을 행한 결과 다음과 같은 결론을 얻었다. 1. 각종 중금속이나 LAS에 대한 넙치, 숭어, 조피볼락의 내성은 일정한 경향이 없었으나 기수성 어류인 숭어가 대체로 약하였고 독성물질 중 수은과 LAS의 독성이 특히 강하였다. 2. 크롬의 어종별 96hr-LC50은 8.4mg/l, 숭어1.14mg/l, 조피볼락 26.65mg/l으로 조피볼락이 타어종에 비해 내성이 훨씬 강하였다. 3. 구리의 어종별 96hr-LC50은 넙치 16.1mg/l, 숭어 2.32mg/l, 조피볼락 0.18mg/l으로 조피볼락의 내성이 타어종에 비해 매우 낮았으며 특히 조피볼락의 MATC는 $0.053{\sim}0.0053mg/l$으로 서해 연안역의 $92{\sim}93$년도 농도가 $0.003{\sim}0.012mg/l$인 점으로 보아 구리 오염에 주의할 필요가 있음을 알 수 있었다. 4. 아연의 어종별 96hr-LC50은 넙치 5.2mg/l, 숭어 13.75mg/l, 조피볼락 6.95mg/l으로 나타났다. 5. 수은의 어종별 96hr-LC50은 넙치 0.28mg/l, 숭어 0.1mg/l, 조피볼락 0.01mg/l으로 조피볼락이 타어종에 비해 내성 낮았으며, 특히 조피볼락의 MATC는 $0.0007{\sim}0.007mg/l$으로 $92{\sim}93$년도의 서해 연안역의 수은 농도가 $0.001{\sim}0.005mg/l$인 점을 고려하여 볼 때 수은 오염에 주의할 필요가 있음을 알 수 있었다. 6. 카드뮴의 어종별 96hr-LC50은 넙치 28.4mg/l, 숭어 2.55mg/l, 조피볼락 28.7mg/l으로 나타났다. 7. LAS의 96hr-LC50은 0.79mg/l이었고, 숭어에 대한 96hr-LC50은 0.06mg/l, 조피볼락 1.08mg/l으로 기수성 어류인 숭어의 내성이 매우 낮은 점이 특이하였다.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2860-2870
• /
• 1994

When crack are detected in aged turbine rotors of power plants, information on fracture resistance of the aged material at operating temperature is needed for determination of critical loading condition and residual life of the turbine. In this study, fracture toughness (J$_lc$) and tearing modulus(T$_mat$) of virgin and thermally degraded 1Cr-1Mo-0.25V steel, which is one of the most widely used rotor steels, were measured at 538.deg. C according to ASTM E813 and ASTM E1152, respectively. Five kinds of specimen with different degradation levels were prepared by isothermal aging heat treatment at $630^{\circ}C.$ It was observed that J$_lc$ and T$_mat$ value decreased as the degradation level increased. Analysis of microstructures using a scanning electron microscope showed that the decrement of J$_lc$ is related to segregation of impurities at grain boundaries. It was also verified that the DC electric potential drop method is accurate and reliable for crack length monitoring at elevated temperature.

• 한국응용과학기술학회지
• /
• 제13권2호
• /
• pp.29-37
• /
• 1996

The phase separated structure and the electo-optical properties of the polymer /liquid crystal(LC) composite films including a dye were investigated. The phase separated structure of the polymer /LC / dye composite film(GH composite film) including below 2wt% dye against LC was almost same with the composite film which does not include dye. But the electro-optical properties of the GH composite film strongly depended on weight fraction of the dye against the LC. The response time of the GH composite film increased with the increase of the dissolved dye in LC because the dye acts as a registivity for the orientation of LC molecules by the electric filed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.133-134
• /
• 2021

Limestone-calcined clay-Cement (LC3) concrete provides a solution for sustainability, durability, and profitability of concrete industry. This study shows experimental studies of the macro properties (residual compressive strength), the meso properties (mesoscopic images), and micro properties (thermogravimetric (TG) analysis, X-ray powder diffraction (XRD), FTIR spectra, Raman spectra, Mercury intrusion porosimetry, and SEM) of LC3 paste with various mixtures and at high elevated temperatures (20 ℃, 300 ℃, 550 ℃ and 900 ℃). We find (1) Regarding to macro properties, LC3 cementitious materials are at a disadvantage in compressive strength when the temperature is higher than 300 ℃. (2) Regarding to meso properties, when the temperature reached 550 ℃, all samples generated more meso cracks. (3) Regarding to micro properties, first, as the substitution amount increases, its CH content decreases significantly; second, at 900 ℃, for samples with calcined clay, a large amount of gehlenite crystalline phase was found; third, at elevated temperatures (20 ℃, 300 ℃, 550 ℃ and 900 ℃), there is a linear relationship between the residual compressive strength and the cumulative pore volume; fourth, at 900 ℃, a large amount of dicalcium silicate was generated, and damage cracks were more pronounced. The experimental results of this study are valuable of material design of fire resistance of LC3 concrete.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.461-466
• /
• 1997

In this paper, we developed the new non-rubbing liquid crystal (LC) alignment techniques in the cell with slanted non-polarized ultraviolet (UV) light irradiation on polyimide (PI) film. It is shown that the uniform alignment for nematic (N) LC is obtained by using slanted non-polarized UV light irradiation on PI surface. We successfully obtained that the pretilt angle of NLC is generated about 3.3 degree in the cell with slanted non-polarized UV light irradiation with 70 degree on PI surface, for the first time. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecular and the PI, which is broken the polymer by slanted non-polarized UV irradiation. Therefore, we concluded that the uniform LC alignment is attributed to anisotropic dispersion force due to photo depolymerization with slanted non-polarized UV light irradiation on PI surface.