• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1568-1576
• /
• 2021

Here, we conducted the study on the possibility of using FK-13, a short analog of human-derived antibacterial peptide LL-37, as a cosmetic preservative to discover a natural cosmetic preservative that is safe for human body. For the purpose, FK-13 composed of 13 amino acids was synthesized by solid-phase peptide synthesis, and purified using reversed phase-high performance liquid chromatography (RP-HPLC). The purity and molecular weight were confirmed by liquid chromatography-mass spectrometry (LC-MS) analysis. FK-13 showed high antimicrobial activity on the three gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis, and Staphylococcus epidermidis), the three gram-negative bacteria (Escherichia coli, Salmonella typhimurium, and Pseudomonas aeruginosa), and also even the fungus Candida glabrata. FK-13 had a broad spectrum of antibacterial activity, showing a suitability as a cosmetic preservative. In addition, FK-13 showed high thermostability and higher antibacterial activity in a comparative test with existing natural herbal cosmetic and chemical preservatives. Therefore, as FK-13 is a safe material and has high antibacterial activity at a low concentration, it is likely to be applied as a peptide natural cosmetic preservative that can replace existing chemical preservatives.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.554-563
• /
• 1999

For the purpose of elucidating the polymerization modes of dual-cure restorative materials and comparing them with single-cure restorative materials, a study was performed on the light-cured composite resin, dual-cure composite resin, dual-cure glass ionomer cement and chemical-cure glass ionomer cement. By measuring the microhardness of each material at 0mm, 1mm and 3mm depth during initial 24 hours with predetermined interval, the state of polymerization and degree of conversion was indirectly evaluated for each material, and obtained results are as follows : 1. All of four materials tested showed significant increase in microhardness after 24hrs compared with just after curing starts. 2. In all materials except Ketac-fil, there showed a significant difference in microhardness between each depth at each time interval. 3. In the test of lap time till final curing for each material, the polymerization process was revealed to last longer in the dual-cure type materials than in single-cure type materials at 3mm depth. Based on the results above, it was demonstrated with materials of dual-cure mode that the degree of conversion increases by successive curing reactions even in the deeper layers where sufficient curing light is impermeable.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.528-537
• /
• 1999

The purpose of this study was to analyze and compare the bond strengths between stainless steel plate and zinc phosphate cement, polycarboxylate cement and glass ionomer cement, which are frequently used for cementation of stainless steel crowns. Three cementing materials were glued to the poles standing above stainless steel plate, bovine teeth, light cured glass ionomer restorative material and amalgam. And the tensile bond strengths between them were measured with universal testing machine and the results were statistically processed using ANOVA and Student t-test. The obtained results were as follows : 1. On stainless steel plate, glass ionomer cement and polycarboxylate cement showed higher tensile bond strengths compared to zinc phosphate cement, with no significant difference between the former two. 2. On the surface of bovine teeth and glass ionomer restorative material, glass ionomer cement showed highest bond strength, followed by polycarboxylate cement and zinc phosphate cement in order. 3. For amalgam restoration, polycarboxylate cement and glass ionomer cement showed higher tensile bond strengths than zinc phosphate cement, with no significant difference between the former two.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.1010-1020
• /
• 1997

For this study, we did needlework of the sample considering practical aspects of production and consumption of silk, high-quality material for women's clothes, and then analyzed the state of the seam puckering after press and dry cleaning, estimated the Seam Puckering based on the mechanical properties of silk related to machine sewing, and examined the effects which Mechanical Properties have on Seam Puckering closely. Through this, we reach the following conclusion. 1. There are three types of seam puckering for each stage, which are caused bathe smoothness of the surface by press, and the difference between the shrinkage rates of fabric and sewing thread by Dry Cleaning. 2. In analyzing seam puckering classified by each step, seam puckering after sewing the fabric is related to WT negatively, while to RT and W positively. Seam puckering after sewing and pressing the fabric is related to WT, RC, MMD negatively and seam puckering after sewing, pressing anddry cleaning the fabric isrelated to WT negatively, too. 3. Concerning the mechanical properties of the sample with a little seam puckering, WT, LC, WC, RC, MMD, SMD is relatively large while RT, B, 2HB is small. 4. Judging from the result of estimating seam puckering based on mechanical properties, the estimate-formula is satisfied in this study.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1698-1702
• /
• 2013

Glucose is a common medical analyte measuring in human serum or blood samples. The development of a primary method is necessary for the establishment of traceability in measurements. We have developed an isotope dilution liquid chromatography tandem mass spectrometry as a primary method for the measurement of glucose in human serum. Glucose and glucose-$^{13}C_6$ in sample were ionized in ESI negative mode and monitored at mass transfers of m/z 179/89 and 185/92 in MRM, respectively. Glucose was separated on $NH_2P$-50 2D column, and the mobile phase was 20 mM $NH_4OAc$ in 30% acetonitrile/70% water. Verification of this method was performed by the comparison with NIST SRMs. Our results agreed well with the SRM values. We have developed two levels of glucose serum certified reference material using this method and distributed them to the clinical laboratories in Korea as samples for proficiency testings. The expended uncertainty was about 1.2% on 95% confidence level. In proficiency testings, the results obtained from the clinical laboratories showed about 3.6% and 3.9% RSD to the certified values. Primary method can provide the traceability to the field laboratories through proficiency testings or certified reference materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1121-1124
• /
• 2004

Carbon Nitride exhibits high electrical resistivity and thermal conductivity that are similar to the properties shown by diamond-like carbon (DLC) films. These diamond-like transport properties in Carbon Nitride come in a material consisting of $sp^2$-bonded carbon versus the $sp^3$-carbon of DLC. The diamond-like properties and nondiamond-like bonding make NDLC an attractive candidate for applications. Liquid crystal (LC) alignment capabilities with ion beam exposure on carbon nitride thin films and Electro-Optical (EO) performances of the ion-beam aligned twisted nematic liquid crystal display (TN-LCD) with oblique ion beam exposure on the Carbon Nitride thin film surface were studied. An excellent uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the Carbon Nitride thin films was observed. In addition, the good EO properties of the ion-beam-aligned TN-LCD were achieved. Finally, we achieved the residual DC property of the ion-beam- aligned TN-LCD on the Carbon Nitride thin film.

• Journal of Life Science
• /
• v.14 no.3
• /
• pp.453-458
• /
• 2004

Soybean oil and protein contents are very important as a nutritional component of food. The seed composition as oil and protein are polygenic traits. In this study, the Keunolkong${\times}$Iksan10 populations were evaluated with SSR markers to identify QTLs related to oil and protein contents. Three related independent QTLs near the marker satt100 on LG C2, satt546 on LG D1b＋W and satt418 on LG L were identified oil contents. The three independent QTLs near the marker satt556 on LG B2, satt414 on LG J and satt238 on LC L were identified of protein contents. In the results of this study, common QTLs on LG L was associated with seed oil and protein contents. In the result of this study, it is believed that the seed composition material as oil and protein contents were mainly controlled by environmental stresses and they are seed size on genotypes.

• The Korean Journal of Community Living Science
• /
• v.15 no.3
• /
• pp.107-112
• /
• 2004

Many studies have showen that Letinus edodes have a reducing effects on blood pressure and lipid levels in animals with high blood pressure and hyperlipidemia. But the only cap has been on the market as goods and the stipe has been wasted. The price is very variable and is based on harvest time and the part of the plant currenty, there is not much information about the nutritional composition and bio-fuctional effects of Letinus edodes based on harvest time and part. Some farmers have been selling the powder seasoning by drying and pulverizing Letinus edodes including stipe to develop value added, late harvested Letinus edodes and its stipe these days. This study was conducted to investigate and compare the nutritional composition of Letinus edodes harvested at different times (early: E, late: L) and separated by part (cap: C, stipe: S). The 4 kinds of materials were named as early harvested cap (EC) and stipe (ES), and late harvested cap (LC) and stipe (LS) samples were obtained from Mungyeong City Agricultural Technology & Extension Center. The composition analysis of the nutrients in the 4 materials was conducted by using the AOAC method. The proximate components (moisture, protein, fat, fiber, ash, and carbohydrates), minerals and vitamin content were measured. Nutritional composition of Lentinus edodes did not show any significant difference between early and late harvested mushrooms. Nutritional compositions were different according to part. The results demonstrate that the late harvested stipe can also be used as a quality food material.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.403-424
• /
• 1996

Cell culture methods have been used to assess the cytotoxicity of dental materials. Different paramaters are used to monitor cytotoxic effects. But it is difficult to compare each investigator's results with different methods. The objective of this study was to investigate cytotoxic effect of several retrograde filling materials according to cell lines and assay methods. Cytotoxicity of Bestalloy (Dogmyung, Korea), Prisma APH(Densply International Inc., U.S.A.), Clearfil FII (Kuraray Co., Japan), Fuji II (GC Co., Japan), Fuji II LC (GC Co., Japan) and IRM (Densply Co., U.S.A.) on L929, 3T3 and KB permanent cell lines was measured. Radiochromium, Lactate dehydrogenase (LDH) release method and colorimetric assays, namely neutral red (NR) and MTT were used. Each material was mixed according to the manufacturer's instruction. They were tested as solid and extracted state. Cell culture media were added to each mixed or solid materials then the solution was collected and used as extract solutions. Solid Fuji II showed mild cytotoxicity on three cell lines using radiochromium release method. There was no difference in cytotoxicity of extract solution group using radiochromium release method. In colorimetric assay immediate Fuji II group and all the IRM groups showed severe cytotoxic effect. Difference in cyctotoxicity was due to rather kinds of cell lines than assay methods. Solid Fuji II and IRM showed mild cytotoxicity on three cell lines. But extract solutions had different cytotoxic effect according to cell lines using LDH release assay. Light-cured glass ionomer had mild to moderate degree of cytotoxicity on three cell lines. Cytotoxicity was affected by specimen prepaton. Susceptibility of each cell ines were also affected by assay emthods. It was suggested that cytotoxicity study using only one cell line and/or assay method might not accurately reflect the real toxic nature of dental biomaterials.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.18.1-18.9
• /
• 2014

Objectives The purpose of this study was to determine a separation method for each arsenic metabolite in urine by using a high performance liquid chromatography (HPLC)-inductively coupled plasma-mass spectrometer (ICP-MS). Methods Separation of the arsenic metabolites was conducted in urine by using a polymeric anion-exchange (Hamilton PRP X-100, $4.6mm{\times}150mm$, $5{\mu}m$) column on Agilent Technologies 1260 Infinity LC system coupled to Agilent Technologies 7700 series ICP/MS equipment using argon as the plasma gas. Results All five important arsenic metabolites in urine were separated within 16 minutes in the order of arsenobetaine, arsenite, dimethylarsinate, monomethylarsonate and arsenate with detection limits ranging from 0.15 to $0.27{\mu}g/L$ ($40{\mu}L$ injection). We used G-EQUAS No. 52, the German external quality assessment scheme and standard reference material 2669, National Institute of Standard and Technology, to validate our analyses. Conclusions The method for separation of arsenic metabolites in urine was established by using HPLC-ICP-MS. This method contributes to the evaluation of arsenic exposure, health effect assessment and other bio-monitoring studies for arsenic exposure in South Korea.