• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.6
• /
• pp.411-420
• /
• 2021

In this paper, bidirectional LLC-LC resonant DC-DC converter with notch filters in the primary side of resonant circuits is proposed. Even if resonant capacitors are used on the primary and secondary sides, the proposed converter can operate with the high gain characteristics of the LLC resonant converter without mutual coupling of resonant capacitors, regardless of the direction of power flow. In addition, by applying notch filters, the proposed converter can operate with a wider gain control range and can cope with overload and short circuit. The analysis and operating characteristics of the proposed bidirectional LLC-LC resonant converter are investigated. A 3.3 kW prototyped bidirectional LLC-LC resonant converter connected to 750 V_DC buses is designed and tested to verify the validity and applicability of this proposed converter.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.54-56
• /
• 2002

본 논문에서는 뇌압을 측정하기 위해 LC 공진을 이용한 압력센서를 제작하고 그 성능을 시험하였다. 원격 측정용 압력센서는 움직이는 전극역할을 하는 p+ 박막이 있는 실리콘 기판과 고정된 평면 코일이 있는 유리 기판으로 구성되어 있다. 압력에 따라 두 전극 간의 간격이 달라지고 이에 따른 캐피시턴스가 변화하여 공진주파수가 변화하게 된다. 원격 측정용 외부 안테나를 이용하여 측정회로의 공진 주파수에서 위상의 변화를 측정하여 압력을 측정한다. 상부기판은 실리콘 기판을 도핑하여 p+ 막을 형성하고 금속막을 증착하여 전극을 형성한 후 실리콘을 식각하여 완성하고. 하부기판은 유리 기판 위에 금속막을 증착한 후. 전기도금으로 평면 코일을 형성하고 다시 금속막을 증착하여 전극을 형성하여 제작한다. 압력을 변화시킬 때 전극간의 간격의 변화에 따른 공진주파수에서의 위상의 변화를 외부 안테나에 연결된 측정회로를 통해 측정한다. 측정결과 공진주파수인 160 Mhz에서 -0.08 $deg/mmH_2O$의 감도를 얻을 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.311-312
• /
• 2014

이 논문은 본 논문에서는 고효율 통합컨버터(OBC/LDC) 전력회로 개발을 제안한다. 차량용 충전기의 고밀도화와 고효율화 기술을 개발함으로써 EV/PHEV용 고성능 단방향 충전기 기술의 확보를 목표로 하며 LDC와 통합을 할 수 있는 기본 구조를 제시 한다. 또한 본 논문에서는 충전기의 고효율화와 LDC와의 통합에 적합한 회로 구조를 연구하며 DC/DC 컨버터의 연구에 집중 하였다. 신규전력구조 개발을 통한 충전 효율 상승 및 LC공진을 통한 낮은 손실을 갖는 공진형 전력회로 개발을 제안하며 전력변환기의 Digital 제어회로와 Power stage 고효율화 연구를 통한 OBC/LDC 통합 구조개발을 제안한다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.71-72
• /
• 2015

본 논문에서는 전자기유도현상을 이용한 에너지 하베스터의 AC 출력 전압을 DC 전압으로 바꾸는 고효율 정류회로를 제안한다. 하베스터에서 다이오드의 문턱전압보다 낮은 전압이 생산될 수도 있을 뿐더러, 더 높은 전압이 생산된다 해도 결국 다이오드 정류를 거치면 엄청난 손실이 생기기 때문에 기존의 다이오드를 이용한 정류회로는 작은 AC 전압을 생산해내는 전자기유도현상을 이용한 에너지 하베스터와는 맞지 않다. 따라서 제안하는 정류회로는 별도의 전원을 필요로 하지 않는 스위치 회로를 갖추어 MOSFET과 LC공진을 이용하여 부스팅 후 정류를 그 목적으로 한 고효율 정류회로이다. 본 논문에서는 MOSFET과 LC공진회로의 특성을 이용한 고효율 정류회로를 설계, 동작원리를 설명하고, PSIM 시뮬레이션을 통하여 그 유용성을 검증한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.537-543
• /
• 2010

This paper presents a slot-shaped defected ground structure(DGS) which has multi-band rejection property. The proposed structure, in which the spiral slot-shaped defects with different size are aligned in the transverse direction to the guiding direction of the coplanar waveguide(CPW), provides multiple resonance frequencies. Compared with the simulated results, the band rejection characteristic is in good agreement with the measurement. Also, an equivalent circuit model of the proposed structure is presented, where the DGS on the ground plane is modeled as LC-resonators. This resonators are inductively coupled to the signal line through mutual inductance. From the equivalent circuit model, multi-band rejection property was derived.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.1
• /
• pp.26-32
• /
• 2012

This paper presents a metamaterial absorber unit sell structure with four-element electric-LC resonators (ELC). In order to enhance the operating bandwidth of the proposed absorber unit cell two pairs of ELC resonators with a different size are used. The proposed unit cell shows negative permittivity and permeability when the electric field is parallel to the capacitive gap and the magnetic field is normal to the plane of ELC resonator. The simulated results show peak absorbance over 90% at two frequencies of 8.53 and 9.08 GHz, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.740-746
• /
• 2009

Two step serial load induction superheater has been proposed using resonance type induction heat method in this paper. Heat method is a type of flowing the electron induction and current to special alloy heater in body from external heat coil with non-contact method. Inverter was a full bridge serial load resonance type and inductor was used as load in LC resonance design to maximize the efficiency. The developed system is a new heat exchanging method combined with electromagnetic induction heater and fluid movement, ana very accurate to control of heating the gas, liquid and evaporated mass, so on without combustion process.

• Journal of the Korean Magnetics Society
• /
• v.22 no.6
• /
• pp.200-203
• /
• 2012

In this study, we have investigated that the operation frequency dependences of the output properties of the orthogonal fluxgate sensor which was fabricated with a ferrite core. An orthogonal fluxgate sensor should be operated in as high as possible frequency to enhance its sensitivity in the case of small sized sensor, because sensitivity of the sensor is proportional to cross section area, winding number and operation frequency. In this study, we investigated the correspondence of the frequency dependence of output and the reactance (inductance and capacitance) of pickup coil and cable. Experimental results represented that we could obtain maximum output (= sensitivity) at optimal frequency which is near LC resonance frequency of the pickup coil and cable.

• Journal of the Korean Magnetics Society
• /
• v.26 no.4
• /
• pp.137-141
• /
• 2016

There is a growing demand for non-contact current measurements for efficient use of electrical power and energy saving. In this study, I propose a non-contact current sensor using LC resonance by a resonance circuit composed of a sensor coil and 2 coupling coils for enabling a wireless measurement. The inductance of the sensor coil, which could be changed by applied current, causes the change of resonance frequency of the resonance circuit. A pair of magnet was attached to the ferrite core to apply a bias magnetic field that enabled the determination of the current direction. We obtained an output voltage change of 18 V with the current of -3~3 A. But, the output was nonlinear. In order to realize the non-contact current measuring method proposed in the present study, there is a need for a strict investigation of linearity and resolution for the future study.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.399-400
• /
• 2018

인덕션 히터(Induction Heater)는 PTC 히터의 비해 빠른 온도 상승 효과를 가지고 있다. 인덕션 히터는 LC공진 회로로 구성된다. 커패시터의 정전 용량은 가격과 중량에 비례한다. 따라서 인덕턴스를 향상시켜서 정전용량을 줄여야 한다. 인덕턴스 향상을 위해 인덕션 히터의 구조를 변경하고 다구찌 기법과 유한요소법(FEM:Finite Element Method) 시뮬레이션을 통해 최적화 모델을 도출한다.