• 제목/요약/키워드: LAM

검색결과 816건 처리시간 0.028초

목재(木材)파티클과 철강결체(鐵鋼結締)가 보오드의 물리적(物理的) 성질(性質)에 미치는 영향(影響) (Effect of Combining Wood Particles and Wire Net on the Physical Properties of Board)

  • 이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제13권3호
    • /
    • pp.3-26
    • /
    • 1985
  • The object of this study was to investigate the effects on physical and mechanical properties of wood particle and sawdust board combined with wire net. Conventional forming, press-lam, and veneer comply boards combining one to four wire net sheets were made from wood particle and sawdust with different spacings (8, 10, 12, and 18 Mok) and different wire diameters (0.35, 0.50, and 0.80mm) composing wire net. They were compared and analyzed statistically with specific gravity, thickness swelling, length swelling, bending properties (modulus of rupture, modulus of elasticity, work to proportional limit, and total work), internal bonding strength, and screw holding strength between wood particle and sawdust boards. The results obtained at this study as cording to the discussions might be concluded as follows; 1. In specific gravity, both particle and sawdust boards by press-lam method were higher than by conventional forming and veneer comply method, and the boards containing more wire net sheets also showed higher value. But the wire net spacings(Mok) had no influence on specific gravity. In general, particle board showed higher specific gravity than sawdust board. Veneer comply board showed lowest specific gravity values. 2. Both particle and sawdust boards by press-lam method was slightly lower than by conventional forming and veneer comply method in thickness swelling. The sawdust board containing 8, 12. and 18 Mok wire net showed lower thickness swelling than the corresponding particle board, but both sawdust and particle boards containing the T8 and 10 Mok wire net showed higher and similar thickness swelling. 3. Both particle and sawdust boards containing wire net showed no difference in MOR and MOE of bending. Comply board was the highest and particle board showed slightly higher than sawdust board in MOR and MOE values. 4. In work to proportional limit and total work in bending, both particle and sawdust boards containing thicker wire diameter and more wire net sheets showed higher value. From these facts, it is conceivable that boards with thicker wire diameter and more wire net sheets show increasing resistance against external force. But there was no significant difference between particle and sawdust borads. 5. In resistance against delamination (internal bonding strength), both sawdust and particle boards containing wire net showed lower value than control, and also showed decreasing tendency with more number of wire net sheet composed. Particle board showed higher resistance against delamination than sawdust board. 6. In screw holding strength, sawdust board containing thicker wire diameter and more wire net sheets showed higher value, but particle board by press-lam method was higher than by conventional forming and veneer comply method. Screw holding strength of particle board was higher than that of sawdust board.

  • PDF

Ply-lam CLT의 합판 접합방식에 따른 휨 성능 평가 (Evaluation of Flexural Performance According to the Plywood Bonding Method of Ply-Lam CLT)

  • CHOI, Gyu Woong;YANG, Seung Min;LEE, Hyun Jae;KIM, Jun Ho;CHOI, Kwang Hyeon;KANG, Seog Goo
    • Journal of the Korean Wood Science and Technology
    • /
    • 제49권2호
    • /
    • pp.107-121
    • /
    • 2021
  • 본 연구에서는 층재 수종과 길이방향의 합판 접합방식과 접합부의 접착제 도포 여부에 따른 휨 성능 및 파괴 양상 분석을 통하여 합판을 코어로 사용한 CLT에 적합한 합판의 접합 방식을 최적화 하고자 하였다. 더글라스 퍼 층재의 경우 길이방향 접합에 의해 휨탄성계수 약 11.5% 감소, 휨강도는 접착제 도포 및 접합방식에 따라 증가 또는 감소하였다. 접착제 미도포 butt joint, 접착제 도포 half lap joint, butt joint 조건이 최적조건으로 도출 되었다. 낙엽송 층재의 경우 길이방향 접합에 의해 휨강도는 약 15%, 휨탄성계수는 약 40% 감소하였으며 접합방식에 따른 차이를 나타내지 않았다. half lab joint와 tongue & groove joint 사용 시 합판 층의 접합부에서 휨에 파괴를 1차적으로 방지해줌으로써 중층의 층재로 전달되는 하중을 감소시켜 주는 것으로 판단된다. 본 연구 결과를 통해 Ply-lam CLT 제조과정에서 낙엽송 층재를 사용하는 경우 접합방법에 따른 차이를 나타내지 않았으며 더글라스퍼 층재를 사용할 경우 butt joint와 half lap 접합 방식이 적합할 것으로 판단된다.

저온처리 기간, 온도 및 광 조건이 자생초롱꽃의 생육과 개화에 미치는 영향 (Growth and Flowering of Campanula Species as Affected by Duration, Temperature, and Light Condition during Chilling Treatment)

  • 이영미;박유경;정병룡
    • 화훼연구
    • /
    • 제19권1호
    • /
    • pp.22-29
    • /
    • 2011
  • 본 연구는 저온처리기간, 온도 및 광의 유무가 초롱꽃 4 종의 생장과 개화에 미치는 영향을 조사하였다. 모주로 사용된 고성종인 자주초롱꽃, 왜성종인 애기초롱꽃 2 품종과 이들의 교잡 육성된 '직녀', '견우' $F_1$ 2 품종의 조직배양묘를 식물재료로 사용하였다. 조직배양묘는 광도가 약 $75{\mu}mol{\cdot}m^2{\cdot}s^{-1}$이고 온도가 $25^{\circ}C$인 기내에서 5주 동안 발근시켰다. 광의 유무는 알루미늄 호일로 포장한 암처리와 명처리(약 $10{\mu}mol{\cdot}m^2{\cdot}s^{-1}$ PPFD)를 사용하였고, 저온처리기간은 3, 6, 또는 9주로 하여 4와 $25^{\circ}C$ 온도에서 저장하였다. 저온처리 후 식물을 10 cm 화분에 상토를 채워 이식하여 생장조절챔버에서 순화시켜 온실로 옮겨 재배하였다. 4종 중 자주초롱꽃에서 생존율이 가장 높았다. 생존율은 암처리보다 명처리에서 더 높았다. 기내에서 6주 이상 저장된 처리구는 생존율이 감소하였다. 4종을 실험한 결과 개화를 한 품종은 '직녀'로 저장기간 3주, 명처리, $25^{\circ}C$에서 62.8%의 높은 개화율을 보였다. 개화는 온도, 저장기간, 그리고 광의 유무에 따라 영향이 있었다. 저장기간 3주, 암조건, $4^{\circ}C$에서 저장한 처리에서 현저하게 개화소요일수가 단축되고 개화특성도 좋았다. 이 결과는 개화를 위해 저온을 요구하는 것은 질적인 것보다 양적임을 암시한다. 이 실험은 조직배양묘를 사용하여 저온처리를 하고 순화하는 과정에서 많이 고사하였으므로, 식물의 개체수를 더 늘려서 이 결론을 확인할 필요가 있다.

양측 유미흉을 동반한 림프관평활근종증 (Lymphangioleiomyomatosis with Bilateral Chylothorax -1 case report-)

  • 김시욱;최재성;나명훈;임승평;이영;유재현
    • Journal of Chest Surgery
    • /
    • 제37권12호
    • /
    • pp.1029-1031
    • /
    • 2004
  • 림프관평활근종증은 드문 질환이며, 임상경과상 악성으로 분류할 수 있다. 복통을 주소로 입원한 21세 여자 환자가 골반 내시경을 통해 난소 황체 출혈을 지혈하였고, 그 후 유미성 복수로 개복하여 후 복막에 위치한 낭성 종양을 절제하여 림프관평활근종증으로 조직 진단 받았다. 홀몬 치료 중 유미흉이 발생하여 흉부외과에서 개흉하여 림프액 누출부위를 봉합결찰하였고, 10% 포타딘 관주로 유미흉은 호전되었으나 유미성 복수가 재발하였으며 진단 6개월에 전신 쇠약과 호흡 부전으로 사망하였다.

Contraction Ratio Variation of the Lateral Abdominal Muscles in Elderly Gait

  • Yi, Jae-Hoon
    • PNF and Movement
    • /
    • 제16권2호
    • /
    • pp.301-306
    • /
    • 2018
  • Purpose: This study aimed to describe and identify the relationship between gait and contracted ratios of the transverse abdominal (TrA), internal oblique (IO), and external oblique (EO) muscles. Methods: This study was conducted on 50 elderly people. The contracted ratios of the lateral abdominal muscles (LAM) were measured using the abdominal drawing-in maneuver (ADIM) and ultrasonographic imaging. Gait was measured using the timed up and go test and the 10 m walk test. Results: The contracted ratios of the TrA and IO muscles significantly increased after ADIM. Those of the TrA muscles showed a significant correlation with gait in the limited community ambulatory group. The contracted ratios of the IO and EO muscles showed a significant correlation with gait in the community ambulatory group. Conclusion: Our findings suggest a specific training on the relationship between gait speed and the activation of the LAM in elderly people.