• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1995

One of the most destructive forces around greenhouses is wind. Wind loads can be obtained by multiplying velocity pressure by dimensionless wind force coefficient. Generally, wind force coefficients can be determined by wind tunnel experiments. The wind force coefficient distribution on a single - span arched greenhouse was estimated using experimental data and compared with reported values from various countries. The results obtained are as follows : 1. The coefficients obtained from this study agree with the values proposed by G. L. Nelson except about 0.5 of difference in the middle region of roof section. This discrepancy is mainly attributed to the dissimilarity of experimental conditions (or wind tunnel test such as Reynolds number, type of terrain, surface roughness of model, location of the lapping and measuring methods. 2. Considering that the wind force coefficients are varied along the height of a wall at wind direction perpendicular to wall, structural analysis using subdivided wind force coefficient distribution is more resonable for wall. 3. It is recommendable that wind force coefficient distribution on a roof should take more subdivision than the existing four equal divisions for more accurate structural design. 4. Structural design using wind forces close to real values is more advantageous in safety and expense.

• Journal of Chest Surgery
• /
• v.18 no.1
• /
• pp.97-103
• /
• 1985

During the period of seven years from Jan. 1976 to Jan. 1983, one hundred cases of pulmonary tuberculous residual lesions were resected at the Department of Thoracic Surgery, Paik Hospital in Seoul, Korea. During the period of this study, 1764 patients were admitted with the diagnosis of pulmonary and/or pleural tuberculosis in the medical and surgical department as a primary or associated conditions. Among these 1764 patients, one hundred selective cases were operated. The results were as follows; l. Extents of the disease by the predominant clinical pictures were: totally destroyed lung; 18, destroyed lobe; 6, cavitary lesion with or without positive sputum; 35, bronchiectasis; 7, bronchostenosis with atelectasis; 2, empyema with or without BPF; 20, pleural thickening; 4, tuberculoma; 3, bullous cyst with tuberculosis; 5 cases, or per cent [Table 1]. 2. Male and female ratio was 1.2:1 or 55 and 45 per cent. Age distribution ranged 15 and 55 with average of 33 years [Table 2]. 3. Type of procedures were: pleuropneumonectomy; 15, pneumonectomy; 25, lobectomy; 37, bilobectomy; 6, lobectomy plus segmentectomy; 3, pleurectomy; 14 cases, or percent, Site of resections were: right; 58 and left; 42 cases, or per cent [Table 3]. 4. Incidence of complications were 10 per cent and the mortality was 4 per cent. The causes of morbidity were analyzed. The main causes of death were pulmonary insufficiency; 2, cardiac arrhythmia; 1, and hepatic insufficiency; 1 case or per cent [Table 4]. 5. Pathologic examinations of the resected pulmonary and pleuropulmonary lesions were observed by gross specimen, correlating with the pre-operative indications of the disease [Fig. 1, 2, 3, 4, 5, 6].>br> 6. Anti-tuberculous chemotherapy was done for 6 to 18 months, post-operatively, in 80 patients. Of these 49 cases were need medication for 12 months [Table 5]. Except the four operative mortality and a case of post-operative recurrent buberculosis under medication, all the other 95 cases are well in activity and free from the disease at the moment.

• The Journal of Korean Physical Therapy
• /
• v.13 no.1
• /
• pp.1-18
• /
• 2001

Aging has been recognized as the primary cause of disc degeneration. A biomechanical characteristics of disc degeneration has been demonstrated that intradiscal pressure is reduced. With the increasing population of elderly people, disc degeneration and associated problems of nerve entrapment are becoming more prevalent. Presently, research on reduced intradiscal pressure associated with degeneration is insufficient. In this study. we used the Finite Element Method (FEM) of computerized simulations to investigate the effects of variation in intradiscal pressure on mechanical behaviours of L4-5 intervertebral disc degeneration. Degeneration was classified using four grades based on initial intradiscal pressure; Normal (135 kPa), mild(107 kPa), moderate (47 kPa) and severe (15 kPa). The predicted results f3r bending loads were as follows; 1 . Range of motion increased progressively with severity of degeneration with flexion and lateral bending moments, but decreased with extension moments. 2. Discal bulging of posterolateral aspect was larger in lateral bending and extension moment. But bulging was increased with severity of degeneration in lateral bending and torsion(same side).3. The rate of increasing intradiscal pressure was decreased in all bending motions with severity of degeneration. In conclusion, lateral bending and extension moment yield greatest bulging in severe degeneration. In torsion, although bending load produces disc bulging, disc bulging was associated more strongly with severity of degeneration than increasing torsional moments. Clinical Implications: Discal bulging may produce nerve root impingement and irritation. The effect of loading and posture on the varying degrees of disc degeneration has important implications especially in the elderly. In the presence of disc degeneration, avoidance of end range postures, especially extension and lateral bending may help reduce discal bulging and in turn, nerve entrapment.

• Applied Biological Chemistry
• /
• v.47 no.4
• /
• pp.414-421
• /
• 2004

3D QSAR studies for protox inhibition activities against root and shoot of the rice plant (Orysa sativa L.) and barnyardgrass (Echinochloa crus-galli) by a series of new 1-(5-methyl-3-phenylisoxazolin-5-yl)methoxy-2-chloro-4-fluorobenzene derivatives were conducted based on the results (Sung, N. D. et al.'s, (2004) J. Korean Soc. Appl. Biol. Chem. 47(3), 351-356) using comparative molecular similarity indices analysis (CoMSIA) methodology. Four CoMSIA models, without hydrogen bond donor field for the protox inhibition activities against root and shoot of the two plants, were derived from the combination of several fields using steric field, hydrophobic field, hydrogen bond acceptor field, LUMO molecular orbital field, dipole moment (DM) and molar refractivity (MR) as additional descriptors. The predictabilities and fitness of CoMSIA models for protox inhibition activities against barnyard-grass were higher than that of rice plant. The statistical results of these models showed the best predictability of the protox inhibition activities against barnyard-grass based on the cross-validated value $r^2\;_{cv}\;(q^2=0.635{\sim}0.924)$, non cross-validated, conventional coefficient $r^2\;_{ncv.}$ value $(r^2=0.928{\sim}0.977)$ and PRESS value $(0.255{\sim}0.273)$. The protox inhibition activities exhibited a strong correlation with the steric $(5.4{\sim}15.7%)$ and hydrophobic $(68.0{\sim}84.3%)$ factors of the molecules. Particularly, the CoMSIA models indicated that the groups of increasing steric bulk at ortho-position on the C-phenyl ring will enhance the protox inhibition activities against barnyard-grass and subsequently increase the selectivity.

• Advances in aircraft and spacecraft science
• /
• v.9 no.2
• /
• pp.95-102
• /
• 2022

The paper investigates the process of pulsation of a spherical cavity (bubble) in a liquid under the influence of a source of ultrasonic vibrations. The process of pulsation of a cavitation pocket in liquid is investigated. The Kirkwood-Bethe model was used to describe the motion. A numerical solution algorithm based on the Runge-Kutta-Felberg method of 4-5th order with adaptive selection of the integration step has been developed and implemented. It was revealed that if the initial bubble radius exceeds a certain value, then the bubble will perform several pulsations until the moment of collapse. The same applies to the case of exceeding the amplitude of ultrasonic vibrations of a certain value. The proposed algorithm makes it possible to fully describe the process of cavitation pulsations, to carry out comprehensive parametric studies and to evaluate the influence of various process parameters on the intensity of cavitation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.87-99
• /
• 1982

This study proposes a reliability based design criteria for the R.C. superstructures of highway bridges. Uncertainties associated with the resistance of T or rectangular sections are investigated, and a set of appropriate uncertainties associated with the bridge dead and traffic live loads are proposed by reflecting our level of practice. Major 2nd moment reliability analysis and design theories including both Cornell's MFOSM(Mean First Order 2nd Moment) Methods and Lind-Hasofer's AFOSM(Advanced First Order 2nd Moment) Methods are summarized and compared, and it has been found that Ellingwood's algorithm and an approximate log-normal type reliability formula are well suited for the proposed reliability study. A target reliability index (${\beta}_0=3.5$) is selected as an optimal value considering our practice based on the calibration with the current R.C. bridge design safety provisions. A set of load and resistance factors is derived by the proposed uncertainties and the methods corresponding to the target reliability. Furthermore, a set of nominal safety factors and allowable stresses are proposed for the current W.S.D. design provisions. It may be asserted that the proposed L.R.F.D. reliability based design criteria for the R.C. highway bridges may have to be incorporated into the current R.C. bridge design codes as a design provision corresponding to the U.S.D. provisions of the current R.C. design code.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.1
• /
• pp.43-49
• /
• 2015

Objective : $Dynesys^{(R)}$ is one of the pedicle-based dynamic lumbar stabilization systems and good clinical outcome has been reported. However, the cylindrical spacer between the heads of the screws undergoes deformation during assembly of the system. The pre-strain probably change the angle of instrumented spine with time and oblique-shaped spacer may reduce the pre-strain. We analyzed patients with single-level stabilization with $Dynesys^{(R)}$ and simulated oblique-shaped spacer with finite element (FE) model analysis. Methods : Consecutive 14 patients, who underwent surgery for single-level lumbar spinal stenosis and were followed-up more than 24 months (M : F=6 : 8; age, $58.7{\pm}8.0$ years), were analyzed. Lumbar lordosis and segmental angle at the index level were compared between preoperation and postoperative month 24. The von Mises stresses on the obliquely-cut spacer ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$, $25^{\circ}$, and $30^{\circ}$) were calculated under the compressive force of 400 N and 10 Nm of moment with validated FE model of the L4-5 spinal motion segment with segmental angle of $16^{\circ}$. Results : Lumbar lordosis was not changed, while segmental angle was changed significantly from $-8.1{\pm}7.2^{\circ}$ to $-5.9{\pm}6.7^{\circ}$ (p<0.01) at postoperative month 24. The maximum von Mises stresses were markedly decreased with increased angle of the spacer up to $20^{\circ}$. The stress on the spacer was uneven with cylindrical spacer but it became even with the $15^{\circ}$ oblique spacer. Conclusion : The decreased segmental lordosis may be partially related to the pre-strain of Dynesys. Further clinical and biomechanical studies are required for relevant use of the system.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.5
• /
• pp.62-72
• /
• 1995

공학분야에 널리 사용되고 있는 신뢰도 분석 방법 중에서 Monte Carlo simulation (MC), Mean-value First-Order Second-Moment Method(MFOSM), and Advanced First-Order Second-Moment(AFOSM) method들을 강물의 오염물질 농도와 수질기준치사이의 신뢰도 분석에 적용하였다. 미 환경 보건국에서 개발 보급한 QUAL2E를 이용하여 Mew Jersey에 위치한 Passaic강의 수질예측에서 4가지 주요인자(용존산소, 생물학적 산소요구량, 암모니아 그리고 조류)들이 정해진 수질기준치를 유지 할 수 있는 확률을 세가지 방법에 의해 추정한 후에 상호 비교하였다. MC방법에 의해 2,000회 simulation시켜서 그 결과가 시스템의 추계학적 성질을 잘 반영한 것으로 판단하여 비교기준으로 삼고 MFOSM과 AFOSM에 의해 추정한 결과와 비교하였다. MFOSM의 결과보다는 AFOSM의 결과가 전체적으로 MC의 결과에 더 근접하였으며, 이유는 AFOSM의 계산방법이 MFOSM의 선형근사로 인한 오차를 줄일 수 있었기 때문인 것으로 판단된다. MC방법의 결과와 다른 방법들의 결과사이의 차이가 입력 변수들이 평균값에서 멀어질 때가 많았는데 이는 MC의 경우 입력 변수들이 일정범위를 벗어나서 비현실적인 상황이면 model이 정지하는데, 다른 방법들은 simulation에 의한 것이 아니고 수학적인 계산에 의해서 신뢰도가 추정되기 때문에 이러한 상황이 반영될 수 없기 때문이다. 강물의 수질을 취급하는 공학적인 측면에서 보면, 이중에 가장 간편한 MFOSM이 많은 simulation이 필요한 MC나 계산방법이 상대적으로 복잡한 AFOSM에 비해 오차가 크지 않아서 이들을 대시하여 사용될 수 있다고 판단된다. 유래의 PAF가 분비된다는 것을 알 수 있었으며, 이러한 인자는 동결처리에서도 그 기능은 전혀 변하지 않는다고 본다. 이후에 있어서 mouse LIF의 첨가는 돼지의 수정란을 배반포 이후의 단계에까지 발달시킬 수 있었다. 있어서 더 적합한 것으로 판단되었다. 5. 개발된 모형은 논 관개의 물리적 측면과 관리목표 모두를 고려한 것으로 계산된 효율은 벼, 생육 각 단계에서의 효율 비교에 양호한 방법임을 알 수 있다.은 Sharpsburg 점질양토에 대한 S.C.S 한계허용치 10ton/ha/year 이내로 나타났다. 비처리구에서의 토양유실량은 평균 2.56ton/ha/year로 높게 나타난 반면 3개의 서로 다른 추리구인 비수구, 초생수로구 및 Bromegrass구에서는 각각 0.152, 0.192 및 0.290ton/ha/year로 낮은 결과를 가져왔다. 6. 평균 침전량에 대한 L.S.D. 검정 걸과 전시험구중 비처리구가 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.451-458
• /
• 2001

The purpose of this study was to evaluate shear parameters on cutting slope of weathered granite soils by using small dynamic cone penetration test on the very moment of its cutting. The results were : On the relations among N$\_$c/, Li, and CEC, the condition of Li＞6%, CEC＞14(meq/100g) corresponds to that of N$\_$c/ values of 2∼30, and 3＜CEC＜14(meq/100g) to N$\_$c/=30∼50. Comparing the smallest penetration depth from two small dynamic cone penetration tests done at 5m below from the top of the slope on April 15th, October 31t. there was a l0cm difference. So we could find out the degree of weathering on the slope. And dividing the difference by 190 days (the whole testing time), we could know it's being weathered 0.052mm each day. The more N. value increases, the more shear parameters(internal friction angle ; $\phi$, cohesion : c) increase at a standard pressure($\sigma$＞32㎪). So the condition of N$\_$c/=2∼50 corresponds to that of $\phi$=27∼50, c=12∼49㎪. From the above testing results, the N$\_$c/ values more correspond to $\phi$ values than c values. In conclusion, this study suggests that on small dynamic cone penetration test a penetration boundary line of 5 centimeters is decided at around Li=4%, CEC=3(meq/100g) which is classified as a strong weathering soil. It also shows that as Li increases CEC increases as well, while N$\_$c/ decreases.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.