• Korean Journal of English Language and Linguistics
• /
• v.2 no.1
• /
• pp.1-21
• /
• 2002

In this paper, a persistent L1 influence on L2 argument structure acquisition is observed in terms of complement and adjunct PPs. Since the distinction between these two PPs in L1 seems not as sharp as in L2, overgeneralization is anticipated in the L2 acquisition due to L1 transfer. Result of an experimental study shows that Korean learners of English do not successfully acquire L2 verb meanings as to which locative PP is obligatory and which is not. Generally, learners transfer the L1 properties when asked to judge grammaticality. Some possible source of constraints in L2 acquisition, such as input frequency and noticing ability is proposed as possible explanations of data. Finally, pedagogical implications in language classroom for vocabulary acquisition are discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.1
• /
• pp.74-83
• /
• 2007

This paper presents the experimental results of evaporation heat transfer coefficients of HC refrigerants (e.g. R290 and R600a). R-22 as a HCFCs refrigerant and R-l34a as a HFCs refrigerant in horizontal double pipe heat exchangers, having four different inner diameters of 10.07, 7.73, 6.54 and 5.80 mm respectively. The experiments of the evaporation process were conducted at mass flux of $35.5{\sim}210.4 kg/m^2s$ and cooling capacity of $0.95{\sim}10.1 kW$. The main results were summarized as follows : The average evaporation heat transfer coefficient of hydrocarbon refrigerants(R-290 and R-600a) was higher than the refrigerants, R-22 and R-l34a. In comparison with R-22 the evaporation heat transfer coefficient of R-l34a is approximately $-11{\sim}8.1 %$ higher. R-290 is $56.7{\sim}70.1 %$ higher and R-600a is $46.9{\sim}59.7 %$ higher. respectively. In comparison with experimental data and some correlations, the evaporation heat transfer coefficients are well predicted with the Kandlikar's correlation regardless of a type of refrigerants and tube diameters.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.1
• /
• pp.108-116
• /
• 2003

In this paper, the experimental results of condensation heat transfer were reported for the plate and shell heat exchangers(P&SHE) using R-l34a. An experimental refrigerant loop has been established to measure the condensation heat transfer coefficient of R-l34a in a vertical P&SHE. Two vertical counter flow channels were formed in the P&SHE by three plates of geometry with a corrugated trapezoid shape of a chevron angle of 45$^{\circ}$. Downflow of the condensing R-l34a in one channel releases heat to the cold up flow of water in the other channel. The effect of the refrigerant mass flux, average heat flux, system pressure and vapor quality of R-l34a on the measured data were explored in detail. The results indicate that at a higher vapor quality the condensation heat transfer coefficients are significantly higher. Condensation heat transfer coefficients were increased when the refrigerant mass flux was increased. A rise in the average heat flux causes an slight increase in the hr. Finally, at a higher system pressure the hr is found to be lower. Correlation is also provided for the measured heat transfer coefficients in terms of the Nusselt number.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.113-128
• /
• 2005

The underlying premise of this study was that L1 production is easily transferred into L2 production. In neutral intonation, there is a consonant-tone correlation in Korean: High tone patterns are correlated with voiceless aspirated and tense consonants and Low-High tone patterns are correlated with lax or other voiced consonants. The purpose of this study was to see whether the correlation in Korean (L1) is transferred into English (L2) production and whether the degree of transfer differs depending on the degree of proficiency. Eight Korean speakers and two American speakers participated in the experiment. F0 contours of words and sentences were collected and analyzed. The results of the present study showed that there is a strong correlation between voicing and tone in L2 utterances. When utterance-initial consonant types were voiceless, the word or the sentence began with the H pattern; otherwise it had the LH pattern. The degree of interference differed depending on the degree of proficiency: less proficient speakers showed a stronger correlation in terms of the magnitude (Hz) and size (ms) of the effects on F0. The results indicate that the consonant-tone correlation in L1 is strongly transferred into L2 production and the correlation transfer can be one of the actual aspects that cause L2 speakers to produce deviant L2 accents and intonation.

• Phonetics and Speech Sciences
• /
• v.10 no.1
• /
• pp.9-14
• /
• 2018

This study compared the relative contributions of intensity, F0, duration and vowel spectra of L2 English lexical stress by Japanese and Korean learners of English. Recordings of Japanese, Korean and native English speakers reading eighteen 2 to 4 syllable words in a carrier sentence were analyzed using multiple regression to investigate the influence of each acoustic correlate in determining whether a vowel was stressed. The relative contribution of each correlate was calculated by converting the coefficients to percentages. The Japanese learner group showed phonological transfer of L1 phonology to L2 lexical prosody and relied mostly on F0 and duration in manifesting L2 English stress. This is consistent with the results of the previous studies. However, advanced Japanese speakers in the group showed less reliance on F0, and more use of intensity, which is another parameter used in native English stress accents. On the other hand, there was little influence of F0 on L2 English stress by the Korean learners, probably due to the transfer of the Korean intonation pattern to L2 English prosody. Hence, this study shows that L1 transfer happens at the prosodic level for Japanese learners of English and at the intonational level for Korean learners.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.8
• /
• pp.796-802
• /
• 2001

The purpose of the present study is to examine the heat transfer characteristics of the U-shape heat pipe for the cooling of semiconductor in subway train. Perflouro-carbon(PFC) was used as working fluid. Temperature distribution on the surface and heat transfer coefficients were investigated according to the working fluid volume percent and heating rate. The results were as follows; Optimum volumetric percent of working fluid was from 80% to 90%, and hat transfer coefficients of evaporation and condensation were as follows, respectively. $\hbar_ie=0.37\times(\frac{P_i}{P_O})$l_c}^0.3$,$\hbar_ic-4.2(\frac{\kappa_l^3p_l^2gh_fg}{\mu_lq_c_l_c}^\frac{1}{3}

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1603-1612
• /
• 1990

An experimental study is conducted to investigate the fluid flow and heat transfer around tubes arranged in line. All measurements are performed at Reynolds number 1.58*10$^{4}$ with varing tube spacings from the small pitch ratio(L/D=1.25) to the large pitch ratio(L/D=3.0). Mean static pressures and mean temperatures of the surface of tubes and mean velocities and turbulent intensities in tube banks are measured. The flow patterns and the characteristics of heat transfer are strongly influenced by the tube spacings. Especially, in the case of very small spacings(L/D=1.25), the flow between neighboring tubes becomes very stagnant and the heat transfer decreases. In the case of each tube spacing, the characteristics of heat transfer around the 3rd, the 4th and the 5th tubes are nearly similar to one another, because the flow around tubes becomes stable at the 3rd tubes. The local heat transfer has the peak value near the reattachment point which has the peak value of pressure, but the local heat transfer for the 2nd tube of L/D=1.25 without reattaching has the peak value at .theta.=75.deg.. For each pitch ratio, the mean heat transfer increases gradually toward the downstream tubes, because the oncoming flow through neighboring tubes comes closer to the forward and rear surfaces of the tube and the turbulent intensity becomes larger in the downstream direction.

• Phonetics and Speech Sciences
• /
• v.4 no.4
• /
• pp.3-17
• /
• 2012

This study examines Korean speakers' production of English consonant clusters, focusing on vowel insertion. An acoustic analysis along with a statistical test was carried out to see what factors are involved in this production. The following factors were considered in the present study: phonetic properties, L1 transfer, and cluster types. Specifically, liquid types were considered to see if they cause any difference depending on C+/l/ or C+/r/ clusters in the onset in terms of vowel insertion patterns. That is, it was examined which Korean speakers produce better, C+/l/ or C+/r/ clusters. Interestingly, the result of the present experiment shows that the correct answer percent was higher in the C+/r/ onset clusters than C+/l/ onset clusters unlike Eckman's (1977) Marked Differential Hypothesis. In other words, the occurrence of the vowel insertion in C+/l/ clusters is higher than C+/r/ onset clusters. This may be attributed to L1 transfer. Furthermore, in the present study, three patterns of vowel insertion in the C+/l/ clusters were identified by implementing an acoustic analysis based on vowel duration and formant: a) vowel insertion with gemination, b) phonological epenthesis, and c) phonetic intrusion. However, phonetic intrusion mainly occurred in the C+/r/ clusters. Data were collected from 54 Korean speakers to see what factors are involved in vowel insertion patterns in the production of English consonant clusters. This study provides evidence for L1 transfer, the duration effect of /l/ in a different context, and three kinds of vowel insertion patterns in conjunction with gestural coordination by age groups.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.202-209
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, 6 kinds of steel wires, 4 kinds of combined steel wires, 8 kinds of combined steel wires with screen meshes were used. The results are summarized as follows; Among 6 kinds of steel wires $({\phi}0.7\;mm,\;{\phi}0.9\;mm,\;{\phi}1.2\;mm,\;{\phi}\;1.6\;mm,\;{\phi}2.0\;mm,\;{\phi}2.7\;mm),$ the two steel wires $({\phi}0.7\;mm,\;{\phi}0.9\;mm)$ showed the highest in effectiveness. Among 4 kinds of combined steel wires $({\phi}l.6-{\phi}l.2\;mm,\;{\phi}1.2-{\phi}l.6\;mm,\;{\phi}0.9-{\phi}l.2\;mm,\;{\phi}l.2-{\phi}0.9\;mm),\;the\;{\phi}1.2-{\phi}0.9\;mm$ showed the highest in effectiveness. Among 8 kinds of combined steel wires with screen meshes $(150-{\phi}0.9\;mm,\;150-{\phi}l.2\;mm,\;{\phi}0.9\;mm-150,\;{\phi}1.2\;mm-150,\;150-{\phi}0.9\;mm-150,\;150-{\phi}1.2\;mm-150,\;150-{\phi}l.6\;mm-150,\;150-{\phi}2.0\;mm-150),\;the\;{\phi}l.2\;mm-150$ showed the highest in effectiveness.

• Journal of Embryo Transfer
• /
• v.32 no.2
• /
• pp.59-64
• /
• 2017

Embryo transfer (ET) could be a relevant tool for genetic improvement programs in horses similar to those already underway in other species and produce multiple foals from the same mare in one breeding season. However, there have been no reports describing equine embryo transfer performed in Korea. In the present study, we performed an equine embryo collection and transfer procedure for the first time. We examined the embryo collection and pregnancy, size of embryo during the incubation period after collection, and progesterone (P4) and estradiol-$17{\beta}$ (E2) concentrations in mare's serum at embryo collection and transfer. A total of 16 donors responded to estrus synchronization; estrus was induced in 12 donors and 4 recipients, and artificial insemination was successful in 10 donors and six blastocysts were collected from donors. Of these blastocysts, we monitored the size of blastocysts for 3 day during incubation and transferred 2 blastocysts to a recipient, with 1 successful pregnancy and foal achieved. The dimensions of equine embryo at day 7 to day 9 were $409{\mu}m$, $814{\mu}m$ and $1,200{\mu}m$. The serum P4 and E2 concentrations were $7.91{\pm}0.37ng/{\mu}L$ and $45.45{\pm}12.65ng/{\mu}L$ in the donor mare, and 1$6.06{\pm}3.27ng/{\mu}L$ and $49.13{\pm}10.09ng/{\mu}L$ in the recipient mare.