• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.31-34
• /
• 2008

The L-bending of inner-structure bonded sandwich sheet metal is examined to reduce springback and defects of bent parts. The specimen is composed of top and bottom layers and a middle layer with dimple type-inner-structure and each layer is bonded by resistance welding. This specimen with hollow type-inner-structure shows different bending characteristics from the conventional sandwich sheet metals with solid type-inner-structure. The experiments were conducted for two kinds of working conditions, that is, clearance and movement of first bent specimen for second bending. The deformed profile, bend angle and springback were investigated and compared and then the proper working conditions for L-bending of sandwich sheet metal were prosed.

• 생물환경조절학회지
• /
• 제30권4호
• /
• pp.251-256
• /
• 2021

코이어 배지를 이용한 파프리카 재배에서 직접 정식 시 절곡방법에 따른 정식 후 초기 생육과 수확량을 비교하였다. 절곡방법은 I-type(절곡각도 0°), 옆으로 뉘인 L-type(절곡각도 90°), 뒤집어서 뿌리가 위로 향하도록 하는 U-type(절곡각도 180°)로 하였다. 줄기 신장 및 직경, 엽면적의 주간 평균 발달량은 정식 후 초기에 다른 처리구에 비해 영양생장이 왕성하였던I-type에서 가장 높았다. 정식 후 46주째의 뿌리 무게도 I-type 처리구에서 다른 처리구들에 비해 약 1.3-1.7배 정도 무거웠다. 처리구별로 330주에서 생산된 수확량은 각각 약 510, 420 및 480kg으로 I-type에서 가장 높았다. 따라서 코이어 배지를 활용한 파프리카 재배에서 직접 정식 시 정식 초기의 뿌리 활착 및 세력 확보, 그리고 이후 착과 안정성에서 I-type이 적합할 것으로 판단된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.560-563
• /
• 2008

A condensed model is proposed for the simulation of forming of sandwich sheet with pyramid core. A corresponding finite element analysis for L-type bending is carried out to prove the accuracy and the effectiveness. Simulation results are compared with those of experiment. Deformation shape and post-buckling behavior by simulation are in good agreement with those of experiment for the considerable range of deformation. From the comparison of force-displacement curve, it is shown that the proposed model shows good prediction of the forming force compared to the experiment. Thus, the effectiveness of the proposed method is sufficiently demonstrated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.316-319
• /
• 2008

The L-bending of inner-structure bonded sandwich sheet metal is examined by using a bending die attached to the material testing machine. The specimen is composed of top and bottom layers and a middle layer of pyramid-core structure and each layer is bonded by brazing. The variables chosen for experiments were clearance between punch and die, location of bend line on the specimen surface and clamping type of specimen during L-bending. Effects of these variables on deformation of specimen around die-corner radius were investigated. It was shown that the irregular shapes of recess are formed in the inner layer of bended parts and they greatly depend on working conditions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권2호
• /
• pp.11-15
• /
• 2005

The I$_{c}$ degradation behavior of Bi-2223 tapes bent at RT and 77K were investigated using the bending device invented by Goldacker. Test results on fixing the tape at RT and 17K showed no difference. At 17K and RT bending, the critical strain was 0.67 and 0.50$\%$, respectively, for the VAM-l tape. For the AMSC tape, it was 0.94 and 0.88$\%$, respectively. These results show that there is additional residual stress in the superconducting filaments to be bent at 17K which shifts the formation of cracks into smaller bending radii. This was proved by computational analysis based on the mixture rule of composites. For the VAM-l tape, the Ie degradation behavior using the Goldacker type device shifted to higher strain levels at about 0.5$\%$, as compared with the FRP sample holders which have a critical bending strain of about 0.24$\%$. Also, for the externally reinforced AMSC tape, Ie degradation using the Goldacker type device begins at a higher strain level, at 0.88$\%$ as compared with using FRP sample holders, at 0.74$\%$. The difference between both cases can be explained by the tensile' and thermal stresses that the tapes were subjected to during fixing (soldering) when the FRP sample holders were used.

• Journal of Welding and Joining
• /
• 제24권3호
• /
• pp.55-59
• /
• 2006

This paper is concerned with a study on cyclic bending load of bus folding door pillar including adhesive bonding and spot welding. Three specimen types were used such as spot welding, I-type adhesive bonding and M-type adhesive bonding in this study. The tensile-shear tests were carried out to evaluate the tensile-shear strength of these three specimen types. Also four-point bending tests were carried out to evaluate the static and dynamic bending load. From the results, using adhesive bonding has a better effect on the static and dynamic bending load than using spot welding. Therefore, manufacturing better structural products can be expected by applying hybrid welding using adhesive and spot welding to those.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.53-60
• /
• 1999

The bending buckling behavior of circular cylindrical shell is studied. The classical analysis by Love type solution and the package program LUSAS for the structural analysis are used to estimate the critical stresses of circular cylindrical shells under axial compression and bending loads. In this paper, the Love type of buckling equation is carefully investigated and numerical results are presented for a wide range of radius-to-thickness (R/t) ratios and length-to-radius (L/R) ratios. These results show that the maximum critical bending stress is about 30~80% greater than the critical compressive stress

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.378-383
• /
• 2009

본 연구에서는 피라미드 형상의 코어재를 갖는 복합판재의 성형해석을 위한 축약모델의 사용이 제안되었다. L형 굽힘성형에 대하여 유한요소해석에 의한 해석을 수행하여 제안된 축약모델의 정확성과 유효성이 검증되었다. 성형해석의 정확성을 향상하기 위하여 코어의 보다 상세한 모델링과 코어성형에 의한 가공경화의 고려가 수행되었다. 변형형상과 성형하중곡선에 대하여 비교하였으며 실험과 좋은 일치를 보였다. 힘-하중 곡선의 비교에서 본 해석이 좌굴후변형거동을 잘 예측할 수 있음을 보였다.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.861-865
• /
• 1998

A plate-type linear ultrasonic motor using logitudinal and bending multi-vibration mode was designed and fabricated for the application to card-forwarding device. The stator consisted of PZ-PT-PMS piezoelectric ceramic plate and stainless steel. The performances of the motor were measured. As the experimental results, no-load speed of the motor was 0.6m/s when applied voltage was $80\textrm{V}_{rms}$ in resonance frequency. Starting torque was 1.4 mNm and maximum efficiency was 1.2%.

• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.888-896
• /
• 2011

본 논문에서는 Flexible-PCB에 제작된 안테나를 구부렸을 때의 특성 변화를 살펴보았다. Polyimide로 이루어진 Flexible-PCB는 유전율 3.5, 두께 0.125 mm를 가진다. 제안된 안테나는 Bluetooth 대역을 만족하는 기본적인 장방형 루프 안테나와 입력부에 Inverted-L 형태의 스터브를 추가한 안테나이다. 제안된 두 가지 안테나 모델에 대하여 8가지 조건의 bending 변화를 통해 bending 정도에 따른 입력 정합 특성과 방사 형태를 비교하였다.