• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.675-685
• /
• 2008

This paper studies two sequential procedures to estimate a monotone convex function using $L_2$ monotonization and uniform convexification; one, denoted by FMSC, monotonizes the data first and then, convexifis the monotone estimate; the other, denoted by FCSM, first convexifies the data and then monotonizes the convex estimate. We show that two shape modifiers are not commutable and so does FMSC and FCSM. We compare them numerically in uniform error(UE) and integrated mean squared error(IMSE). The results show that FMSC has smaller uniform error(UE) and integrated mean squared error(IMSE) than those of FCSC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.567-569
• /
• 1992

Design sensitivity analysis is proposed for the optimal shape design of three dimensional magnetostatic problems. The direct differentiation method is introduced for design sensitivity analysis and the boundary element method with reduced magnetic scalar potential as the state variable is used to analyze the magnetic characteristics. In the direct differentiation method, the design sensitivity, defined as the total derivative of the objective function with respect to the design variables, is calculated based on the variation of the state variable with respect to the design variable. And the variation of He state variable is calculated by differentiating the both sides of the system matrix equation obtained by applying boundary element method. Through the numerical example with simple electromagnet, the usefullness is proved.

• 상하수도학회지
• /
• 제21권2호
• /
• pp.177-185
• /
• 2007

Hydraulic efficiency($T_{10}/T$) in clearwell is often estimated by L/W ratio. However, this estimation is not accurate because other factors which give an effect on hydraulic efficiency such as shape of basin, diffuser wall and intra-basin is ignored. Therefore, in this research, hydraulic efficiency is predicted by the quantitative analysis of dead zone using CFD simulation in a pilot scale clearwell. The results show that the reason why higher L/W ratio increase the hydraulic efficiency is to decrease the dead zone of linear region which is located between baffles. Diffuser wall or intra-basin also affects on hydraulic efficiency with this process. Also, we conclude that hydraulic efficiency can not be reached to 0.8 or higher.

• 한국분말재료학회지
• /
• 제1권1호
• /
• pp.60-65
• /
• 1994

When a commercial prealloyed Fe-powder(Fe-5Cr-lMo-2Cu-0.5P-3C) is liquid phase sintered at 116$0^{\circ}C$, liquid precipitates with various shapes form within solid grains during the initial stage of sintering. The shape of a liquid precipitate changes pith the increment of their size from sphere(with radius<0.3$\mu\textrm{m}$), a transient polyhedron with more than 7 faces(1~2 $\mu\textrm{m}$), cuboid(3~5 $\mu\textrm{m}$), and finally to sphere(>5 $\mu\textrm{m}$). The shapes of liquid precipitates closely resemble the growth shapes predicted on the basis of solid-liquid interfacial energy and the coherency strain energy with anisotropic elastic constants in the diffusion zone around the precipitates.

• 한국가정과학회지
• /
• 제10권1호
• /
• pp.5-17
• /
• 2007

The purpose of this study was to search out an relativeness to the apartment housing unit plans and the unit plans of rural houses. Unit plans data were collected from housing registration records or field survey methods. 45 rural plans and 53 apartment plans were analyzed. The results were as follows; First, the floor planning characteristics of rural houses were 'ㅋ'type of floor plan shape, 2.5 or 3 bay arrangement, L-DK type of social space, and the front entrance. Second, the floor planning characteristics of apartment houses were '-'type of floor plan shape, 2 bay arrangement, L...DK type of social space, and the side or rear entrance. Third, 3 bay arrangement method of rural houses effected to apartment houses, and L...DK type of apartment houses effected to rural houses. Utility or balcony spaces of rural houses was inversely effected from apartment houses.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.179-184
• /
• 1994

In this study a nondimensional parameter, feed/land length(F/L) was introduced, and using this parameter, cutting performance and chip breaking characteristics of the groove and the land angle type chip formers were assessed. Specific cutting energy consumed and shape of broken chip with its breaking cycle time were appraised to find out the ranges of F/L value where efficient cutting and effective chip breaking could be achieved. C type chip was found out to be the most preferable in terms of cutting efficiency.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1077-1084
• /
• 2017

기존의 선박용 디젤 엔진에는 항상 일정한 엔진 부하량을 유지하는 캠 구동장치가 적용되고 있었으나, 최근 환경규제로 인하여 엔진 부하량에 따라 실린더 온도를 개별적으로 제어하는 LDCL(Load dependent cylinder liner) JWCS(Jacket water cooling system)가 적용된 전자유압 제어방식이 개발되었다. 이 시스템에서 3-way 밸브는 실린더의 상부와 하부와의 온도 차이를 줄여 저온부식을 방지하는데, 대부분 수입에 의존하고 있으며 토출유량이 낮다. 이에 본 연구에서는 3-way 밸브 내부 형상 관련 설계인자가 성능(토출 유량 및 온도)에 미치는 영향을 파악하여 밸브의 형상 설계를 수행하였으며, 기존 모델과의 성능 비교를 통해 제안된 밸브의 우수성을 검증하였다.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.47-52
• /
• 2013

In order to operate a search and rescue robot in hazardous area, the robot requires high mobility and adaptable locomotion for moving in unpredictable environments. In this paper, we propose the deformable soft wheel robot that can produce three kinds of driving modes; caterpillar driving mode, normal wheel driving mode, legged-wheel driving mode. The robot changes its driving mode as it faces the various obstacles such as a small gap, stairs etc. Soft film and composite materials are used for fabrication of deformable wheel structure and Shape Memory Alloy (SMA) coil spring actuators are attached on the structure as an artificial muscle. Film lamination and an composite manufacturing process is introduced and the robot design is required to be modified and compromised to applying the manufacturing process. The prototype is developed and tested for verifying feasibility of the deformable wheel locomotion.

• 한국지반공학회논문집
• /
• 제24권2호
• /
• pp.27-36
• /
• 2008

3차원 수치해석에 의해 굴착면적비(L/B)인 굴착 폭 B와 굴착면의 길이 L의 변화에 따른 흙막이벽체의 변위를 비교하여 지반굴착의 기하학적 형상의 차이와 관련된 영향성을 분석하였다. 흙막이벽체의 변위는 동일한 굴착 폭을 기준으로 굴착면의 길이 L이 증가함에 따라 증가하는 것으로 나타나며, 굴착단면치 중앙부에서 미장부재가 폐합되는 가설구조체계가 형성되는 모서리부로 갈수록 흙막이벽체와 띠장력재의 폐합에 치한 구속효과의 영향으로 인하여 감소하는 것을 알 수 있었다. 또한 흙막이벽체의 변형해석을 굴착평면의 형상을 고려하지 못하는 2차원 수치해석과 굴착평면의 형상을 고려할 수 있는 3차원 수치해석에 영향을 미치는 인자들 중 굴착면적비와 지반변형계수를 고려하여, 두 해석이 일치하는 상관관계를 흙막이벽체의 최대변위를 기준으로 2차원 수치해석 결과로부터 3차원 수치해석 결과가 도출할 수 있는 관계식을 제안하여 현장계측결과와 비교 하였다.

• The Korean Journal of Ecology
• /
• 제6권4호
• /
• pp.243-249
• /
• 1983

Absorption pattern of potassium, calcium, phosphate and nitrate ions, and the pH change during ion-absorption at pH 3.0-11.0 by Oryza sativa L. were studied to investigate indirectly the evidence of H^+-efflux by ATPase. The rice seedlings which were grown either in $L^{\circ} -dark or in L^+-sunlight$, were used both in each ion-absorption to compare with one another. The uptake rate of these ions appeared to favor more in $L^+than in L^{\circ}$, over all range in pH, nearly with the same pattern. The absorption of potassium resulted in bell shape and that of calcium increased linearly to the alkali range. The shape of phosphate-absorption showed nearly the t-distribution curve with high value in acid range and the uptake of nitrate resulted in the dual peaks, but higher in acid range. The pH of the external solution changed from the range of 3.5-11.0 to 3.5-7.0 after lhr-absorptioin, and further acidified after 3hr-absorption. It is suggested that the pH change of the external solution be affected by $ H^+-efflux$ which may be caused by the ATP-hydrolysis.