• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.142-153
• /
• 2011

'Silla Monument Stone in Jungseong-ri, Pohang' was discovered in Pohang City, Gyeongsangbuk Province of Korea in 2009. The monument stone with irregular shape has dimensions of maximum height of 105cm, width of 47.6~49.6cm, thickness of 13.8~14.7cm and weight of 115kg. The results of monument stone was found to be granitite. Conservation treatment procedure was carried out in the order of production of Weathering map, cleaning of surface pollutants, consolidation using ethyl silicate. Black pollutant(crust) that covered more than 60% of the surface was analyzed first in order to remove the pollutants on the surface of the monumental stone by cleaning of surface pollutants using laser. The purpose on analysis was not only to verify the pollutants on the stone but also to carry out preliminary cleaning by securing rocks with same pollutant as the monumental stone. As the results of analysis using p-XRF(PMI. INNOV-X, USA) on the site, high level of Mn and Fe were detected, and the analysis of small section that had been fallen off with SEM/EDX for the purpose of quantitative analysis also detected high level of Mn. The Similar contaminants on Stone secured in the manner described above were made into 10 samples ($5cm{\times}5cm$) and was subjected to preliminary cleaning by Nd-YAG Laser(Laser&Physics, Korea). The results of surface observation through portable microscope during cleaning revealed that the power of 460mJ, wavelength of 1064nm and irradiation frequency of 1,800~2,300 per $25cm^2$ were most effective. Evaluation on the preservative treatment was made through confirmation of the extent of removal through color-difference meter measurement and component analysis prior to and following removal of the pollutants. As the result of color-difference meter measurement increase in the brightness was evidenced by the increase in the brightness ($L^*$)value from 33 to 49, and it was possible to ascertain the reduction in the pollutants as the content of Mn was reduced by about 80% from $50,000{\pm}5,000ppm$ to $10,000{\pm}2,000pmm$ from the result of component analysis.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.193-208
• /
• 2021

The characteristics of the microcrack lengths(①), microcrack spacings(②) and Brazilian tensile strengths(③) related to the six directions of rock cleavages(H2~R1) in Geochang granite were analyzed. First, the 18 cumulative graphs for the above three major factors representing unique characteristics of the rock cleavages were made. Through the general chart for these graphs classified into three planes and three rock cleavages, the 28 parameters on the length, spacing and Brazilian tensile strength have been determined. The results of correlation analysis among these parameters are summarized as follows. Second, the above parameters were classified into six groups(I~VI) according to the sorting order on the magnitude of parameter values among three rock cleavages and three planes. The values of parameters belonging to group I and II are in order of R(rift) < G(grain) < H(hardway) and H < G < R. The values of the 8 parameters on the length of line(os₂, 𝚫s, 𝚫L and oS^mean), the exponent(λ_L^mean and λ_S^mean), the slope(a^mean) and the anisotropy coefficient (An^mean) are in order of R < G < H and H'(hardway plane) < G'(grain plane) < R'(rift plane). Third, the noticeable differences in distribution patterns among the six types of charts for three planes and three rock cleavages are as follows. From the chart for three planes, the values of 𝚫L, 𝚫s and 𝚫σ_t, corresponding to the distance between two points where the two fitting lines meet on the X-axis, increase in the order of R' < H' < G'. In particular, the two graphs of R2 and G2 related to the length and Brazilian tensile strength are almost parallel to each other and show the distribution characteristics of hardway plane. Among the graphs related to the Brazilian tensile strength, the overall shape for hardway plane is similar to that for grain. From the chart for three rock cleavages, the slopes of the graphs related to the length increase in the order of R < G < H, while those of the graphs related to the spacing and Brazilian tensile strength decrease in the order of R < G < H. Lastly, the characteristics of variation among the six rock cleavages, the three planes and the three rock cleavages were visualized through the correlation chart among the above parameters from this study.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.637-654
• /
• 2023

In recent years, the number of users has been increasing with the rapid development of earth observation satellites. In response, the Committee on Earth Observation Satellites (CEOS) has been striving to provide user-friendly satellite images by introducing the concept of Analysis Ready Data (ARD) and defining its requirements as CEOS ARD for Land (CARD4L). In ARD, a mask called an Unusable Data Mask (UDM), identifying unnecessary pixels for land analysis, should be provided with a satellite image. UDMs include clouds, cloud shadows, terrain shadows, etc. Terrain shadows are generated in mountainous terrain with large terrain relief, and these areas cause errors in analysis due to their low radiation intensity. previous research on terrain shadow detection focused on detecting terrain shadow pixels to correct terrain shadows. However, this should be replaced by the terrain correction method. Therefore, there is a need to expand the purpose of terrain shadow detection. In this study, to utilize CAS500-4 for forest and agriculture analysis, we extended the scope of the terrain shadow detection to shaded areas. This paper aims to analyze the potential for terrain shadow detection to make a terrain shadow mask for South and North Korea. To detect terrain shadows, we used a Hill-shade algorithm that utilizes the position of the sun and a surface's derivatives, such as slope and aspect. Using RapidEye images with a spatial resolution of 5 meters and Sentinel-2 images with a spatial resolution of 10 meters over the Korean Peninsula, the optimal threshold for shadow determination was confirmed by comparing them with the ground truth. The optimal threshold was used to perform terrain shadow detection, and the results were analyzed. As a qualitative result, it was confirmed that the shape was similar to the ground truth as a whole. In addition, it was confirmed that most of the F1 scores were between 0.8 and 0.94 for all images tested. Based on the results of this study, it was confirmed that automatic terrain shadow detection was well performed throughout the Korean Peninsula.

• Korean Journal of Agricultural Science
• /
• v.16 no.1
• /
• pp.84-101
• /
• 1989

An accurate measurement of size, surface area and volume of agricultural products is essential in many engineering operations such as handling and sorting, and in heat transfer studies on heating and cooling processes. Little information is available on these properties due to their irregular shape, and moreover very little information on the rough rice, soybean, barley, and wheat has been published. Physical dimensions of grain, such as length, width, thickness, surface area, and volume vary according to the variety, environmental conditions, temperature, and moisture content. Especially, recent research has emphasized on the variation of these properties with the important factors such as moisture content. The objectives of this study were to determine physical dimensions such as length, width and thickness, surface area and volume of the rough rice, soybean, barley, and wheat as a function of moisture content, to investigate the effect of moisture content on the properties, and to develop exponential equations to predict the surface area and the volume of the grains as a function of physical dimensions. The varieties of the rough rice used in this study were Akibare, Milyang 15, Seomjin, Samkang, Chilseong, and Yongmun, as a soybean sample Jangyeobkong and Hwangkeumkong, as a barley sample Olbori and Salbori, and as a wheat sample Eunpa and Guru were selected, respectively. The physical properties of the grain samples were determined at four levels of moisture content and ten or fifteen replications were run at each moisture content level and each variety. The results of this study are summarized as follows; 1. In comparison of the surface area and the volume of the 0.0375m diameter-sphere measured in this study with the calculated values by the formula the percent error between them showed least values of 0.65% and 0.77% at the rotational degree interval of 15 degree respectively. 2. The statistical test(t-test) results of the physical properties between the types of rough rice, and between the varieties of soybean and wheat indicated that there were significant difference at the 5% level between them. 3. The physical dimensions varied linearly with the moisture content, and the ratios of length to thickness (L/T) and of width to thickness (W/T) in rough rice decreased with increase of moisture content, while increased in soybean, but uniform tendency of the ratios in barley and wheat was not shown. In all of the sample grains except Olbori, sphericity decreased with increase of moisture content. 4. Over the experimental moisture levels, the surface area and the volume were in the ranges of about $45{\sim}51{\times}10^{-6}m^2$, $25{\sim}30{\times}10^{-9}m^3$ for Japonica-type rough rice, about $42{\sim}47{\times}10^{-6}m^2$, $21{\sim}26{\times}10^{-9}m^3$ for Indica${\times}$Japonica type rough rice, about $188{\sim}200{\times}10^{-6}m^2$, $277{\sim}300{\times}10^{-9}m^3$ for Jangyeobkong, about $180{\sim}201{\times}10^{-6}m^2$, $190{\sim}253{\times}10^{-9}m^3$ for Hwangkeumkong, about $60{\sim}69{\times}10^{-6}m^2$, $36{\sim}45{\times}10^{-9}m^3$ for Covered barley, about $47{\sim}60{\times}10^{-6}m^2$, $22{\sim}28{\times}10^{-9}m^3$ for Naked barley, about $51{\sim}20{\times}10^{-6}m^2$, $23{\sim}31{\times}10^{-9}m^3$ for Eunpamill, and about $57{\sim}69{\times}10^{-6}m^2$, $27{\sim}34{\times}10^{-9}m^3$ for Gurumill, respectively. 5. The increasing rate of surface area and volume with increase of moisture content was higher in soybean than other sample grains, and that of Japonica-type was slightly higher than Indica${\times}$Japonica type in rough rice. 6. The regression equations of physical dimensions, surface area and volume were developed as a function of moisture content, the exponential equations of surface area and volume were also developed as a function of physical dimensions, and the regression equations of surface area were also developed as a function of volume in all grain samples.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.3
• /
• pp.109-120
• /
• 2018

The distributional characteristics of fault segments in Cretaceous and Tertiary rocks from southeastern Gyeongsang Basin were derived. The 267 sets of fault segments showing linear type were extracted from the curved fault lines delineated on the regional geological map. First, the directional angle(${\theta}$)-length(L) chart for the whole fault segments was made. From the related chart, the general d istribution pattern of fault segments was derived. The distribution curve in the chart was divided into four sections according to its overall shape. NNE, NNW and WNW directions, corresponding to the peaks of the above sections, indicate those of the Yangsan, Ulsan and Gaeum fault systems. The fault segment population show near symmetrical distribution with respect to $N19^{\circ}E$ direction corresponding to the maximum peak. Second, the directional angle-frequency(N), mean length(Lm), total length(Lt) and density(${\rho}$) chart was made. From the related chart, whole domain of the above chart was divided into 19 domains in terms of the phases of the distribution curve. The directions corresponding to the peaks of the above domains suggest the directions of representative stresses acted on rock body. Third, the length-cumulative frequency graphs for the 18 sub-populations were made. From the related chart, the value of exponent(${\lambda}$) increase in the clockwise direction($N10{\sim}20^{\circ}E{\rightarrow}N50{\sim}60^{\circ}E$) and counterclockwise direction ($N10{\sim}20^{\circ}W{\rightarrow}N50{\sim}60^{\circ}W$). On the other hand, the width of distribution of lengths and mean length decrease. The chart for the above sub-populations having mutually different evolution characteristics, reveals a cross section of evolutionary process. Fourth, the general distribution chart for the 18 graphs was made. From the related chart, the above graphs were classified into five groups(A~E) according to the distribution area. The lengths of fault segments increase in order of group E ($N80{\sim}90^{\circ}E{\cdot}N70{\sim}80^{\circ}E{\cdot}N80{\sim}90^{\circ}W{\cdot}N50{\sim}60^{\circ}W{\cdot}N30{\sim}40^{\circ}W{\cdot}N40{\sim}50^{\circ}W$) < D ($N70{\sim}80^{\circ}W{\cdot}N60{\sim}70^{\circ}W{\cdot}N60{\sim}70^{\circ}E{\cdot}N50{\sim}60^{\circ}E{\cdot}N40{\sim}50^{\circ}E{\cdot}N0{\sim}10^{\circ}W$) < C ($N20{\sim}30^{\circ}W{\cdot}N10{\sim}20^{\circ}W$) < B ($N0{\sim}10^{\circ}E{\cdot}N30{\sim}40^{\circ}E$) < A ($N20{\sim}30^{\circ}E{\cdot}N10{\sim}20^{\circ}E$). Especially the forms of graph gradually transition from a uniform distribution to an exponential one. Lastly, the values of the six parameters for fault-segment length were divided into five groups. Among the six parameters, mean length and length of the longest fault segment decrease in the order of group III ($N10^{\circ}W{\sim}N20^{\circ}E$) > IV ($N20{\sim}60^{\circ}E$) > II ($N10{\sim}60^{\circ}W$) > I ($N60{\sim}90^{\circ}W$) > V ($N60{\sim}90^{\circ}E$). Frequency, longest length, total length, mean length and density of fault segments, belonging to group V, show the lowest values. The above order of arrangement among five groups suggests the interrelationship with the relative formation ages of fault segments.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.5
• /
• pp.49-65
• /
• 2019

This study was carried out to investigate the domestic and international development of a new cultivar of the Rose of Sharon (Hibiscus syriacus L.), the Korean national flower, and the protection of the new plant variety. In addition, it will be used as basic data for the expansion of domestic distribution, promoting oversea export, and expanding the range of landscape architectural use. A total of 97 varieties received plant variety protection rights from the Korea Seed & Variety Service from 2004 to 2018. The selection criteria were plants having unique flowers, growth habits, and variegated leaves. Some cultivars with unique features, such as flower size, shape, and red eyes were available for focus planting. Plant varieties with tall and strong growth patterns have been highly valuable for street and focus planting. Cultivars with dwarf stems and compact branches are utilized for pot planting and bonsai. The protected cultivars were mostly single flower varieties, with two semi-double flowers. There were 57 cultivars of pink flowers with red eyes and 21 cultivars of white flowers with red eyes. There were 61 cultivars developed by crossing, 23 cultivars through interspecific hybridization and 7 cultivars developed through radiation treatment and mutation. The Hibiscus cultivars registered to the United States Patent and Trademark Office (USPTO) consisted of seven cultivars each from the United States, the United Kingdom, and the Netherlands, four from South Korea, and three from Belgium. The Hibiscus cultivars registered to the European Community Plant Variety Office (CPVO) consisted of 16 cultivars from France, 9 from the Netherlands, 5 from the UK and 1 from Belgium. The cultivars that received both plant patent and plant breeder rights in the United States and Canada were 'America Irene Scott', 'Antong Two', 'CARPA', 'DVPazurri', 'Gandini Santiago', 'Gandini van Aart', 'ILVO347', 'ILVOPS', 'JWNWOOD 4', 'Notwood3', 'RWOODS5', 'SHIMCR1', 'SHIMRR38', 'SHIMRV24', and 'THEISSHSSTL'. 'SHIMCR1' and 'SHIMRV24' acquired both domestic plant protection rights and overseas plant patents. The 14 cultivars that received both US plant patents and European protection rights were 'America Irene Scott', 'Bricutts', 'DVPAZURRI', 'Gandini Santiago', 'Gandini van Aart', 'JWNWOOD4', 'MINDOUB1', 'MINDOUR1', 'MINDOUV5', 'NOTWOOD3', 'RWOODS5', 'RWOODS6', 'Summer Holiday', and 'Summer Night'. The cultivars that obtained US patents consisted of 18 cultivars (52.9%) with double flowers, 4 cultivars (11.8%) with semi-double flowers, and 12 cultivars (35.3%) with single flowers. The cultivars that obtained European new variety protection rights, consisted of 11 cultivars (34.3%) with double flowers, 12 cultivars (21.9%) with semi-double flowers, and 14 cultivars (43.8%) with single flowers. In the future, new cultivars of H. syriacus need to be developed in order to expand domestic distribution and export abroad. In addition, when developing new cultivars, it is required to develop cultivars with shorter branches for use in flower beds, borders, hedges, and pot planting.

• Journal of Korean Academy of Nursing
• /
• v.5 no.2
• /
• pp.74-91
• /
• 1975

A purpose of this study was to compare the breast massage and manual expression of the breast before engagement after delivery with the time of engagement, the throbbing pain in breast, the first amount of breast milk and involution of the uterus. The subjects selected for this study were 138 women (experimental group;69, control group :69) who were admitted to the Dept. of Obtest. and Gyneco. of Kyung Hee University Hospital from Jan. 5 to June 5, 1975. The results of study were as follows; 1 The average age of the women 26.9 years old in the experimental group and 27.6 years old in the control group. As to religion, the number of those who had no religion was 58.0 percent and 62.4 percent respectively. Classified according to occupation, there were 87.0 percent in house wives of the booths group. Educational background; 87.0 percent of high school graduates or above, 78.3 percent respectively. The occupation of husband 53.7 percent of company employees stood highest and 42.0 percent respectively. In according to the grade of wards, 55.1 percent and 52.2 percent of four-men room stood highest. 2. Physical condition: Body weight before this Pregnancy(T=0.4962, N.S.), the size of breast(X²df2 = 0.1728, N.S.), the shape of nipple(X²df3 =1.3804, N.S.), hemoglobin's level of the first day after delivery(T=1.2572, N.S.), the above were showed non significant between the experimental group and control group The investigator found any difference between the two groups of the health condition during the pregnancy, 3. The rate of no experience of breast massage during pregnancy was 85 percent and 75.4 percent (X²df1=2.2562, N.S.). 4. As to the meal during hospitalization after delivery: The booth of the groups in ordinary food took usually of meyer soup and milk(X²df8=2.5957, N.S.). 5. The relation between the first step of breast massage, second step of the manual expression of breast before engagement after delivery and time of engagement : average time of engagement in the experimental group (2.1 days±0.8) was shortened than the control group (3.3 days±1.2). (T=-6.9045, P< 0.005). It toot less time in the experimental group of primipara(2.2days±0.7) than in the control group (3.1day±1.2) and it also took less time in the experimental group of multipara (2.0 days±0.9) than in the control group (3.5days±1.4). (Primipara T=-3.9266, 0< 0.005. Multipara T= 5.2356, P<0.005). 6. The relationship between the first step of the massage and second step of manual expression and the throbbing pain at the time of engagement: The experimental group showed less effect than control group (X²df4= 27.3342 P<0.005). The separate study of primipara and multipara showed remarkable difference in the group of primipara)X²df4=20.7285, p<0.005) and little difference in the multipara group (X²df4=8.8351, p< 0. 10). 7. The relationship between the first step of the breast massage, second stop of the manual expression and first amount of breast milk: The average amount of breast milk increased more conspicuously in the experimental group (33.8㎖±23.4) than in the control(29.8㎖±25.3) (T=0.8262, N.S.). No remarkable difference was found in the respective groups that investigated in the groups of primipara and of multipara. (Primipara T=1.1467, N.S., Multipara T=-0.0354, N.S.). 8. The relationship between the first step of breast massage and second step of manual expression of breast and involution of uterus : Average time needed for uttering involution was sooner in the experimental group of primipasa(-3.3 F.B.±1.1), than the control group of primipara (-2.5F. B.±1.2), and it was sooner in the experimental group of muitipara (-3.0 F. B.±l..3), than the control group of multipara(-2.3 F.B±0.9). Primipara T=-2.9272, p< 0.005, Multipara T=2.5557, p< 0.01).

• Korean journal of applied entomology
• /
• v.36 no.1
• /
• pp.67-72
• /
• 1997

To study the ecological characteristics of the mulberry longicorn beetle, Apriona germari Hope, Mulberry branches with egg-laid scar were regionally collected from ten mulberry fields during the hibernation. It showed that its distribution was highest in Kyunggi province with 3.05% and lowest in Kyungnam province with 0.28%. The number of the egg-laid scar per branch was single with 87.7% of high frequency and its average size was 2.38 L$\times$1.45 W$\times$0.34D cm. The average diameter of scarred branch was 1.7 cm, ranging from 1.3 to 1.9 cm. the shape of egg was long elliptical with width of $2.32\pm$0.33 mm and with length of $6.606.60\pm$0.55 mm. the weight of egg was $16.6\pm$2.94 mg and the color of the just-oviposited egg was milky white, changing into thick brown with time. The weight and length of the just-hatched larva was $16.6\pm$2.4 mg and $6.36\pm$0.66 mm. respectively. Most of the larvae moved downward inside the branch, showing that 94.2% of larvae for outdoor rearing and 87.9% of larvae for indoor rearing moved downward in the branch. As a result, it was found that it hibernated at egg stage with a higher rate than at larval stage by two or three folds in Kyunggi and Kyungbuk province and contrarily at larval stage with higher rate than at egg stage in Chunbuk, Chunnam and Kyungnam provinces. The survival rate for the egg after hibernation was significantly low with 6.6% and contrarily for the larva after hibernation remarkably high with 91.2%. Although the survival rate of the egg in this survey was relatively low, the result indicated that there were two types of hibernation of A. germari in Korea; egg and larval stage.

• Journal of Korean Society of Forest Science
• /
• v.83 no.1
• /
• pp.12-19
• /
• 1994

Studies were made to find out the mycelial growth and rotting characteristics of 91 Lentinus edodes isolates collected or hybridized in Korea and abroad, and their adaptability to bag-culture. The results are as follows. 1. There were little differences in mycelial growth at PDA and oak (Quercus mongolica) sawdust-based medium, and rotting among high-, mid- and low temperature types of L. edodes isolates. But, the fruit yield of high-temperature type was much higher than those of the other two types. The fruit yields of the isolates in the same strain group were apparently different. 2. From the sawdust-based culture of 91 isolates, FRI 221, FRI 208 and FRI 169 were selected as excellent strains in yield and Quality, showing fruiting of 157g, 152g and 119g per 1kg-medium, respectively. 3. Attempts to culture in various media with different substrates resulted in almost same fruit yields, and the yield was proportional to medium weights as 2.5kg-medium showed 2.5 times more yield than 1kg-medium. Fruit yields were different according to incubation periods and the period of little more than 100days was best. 4. When the correlation analyses among mycelial growth, rotting ability, yield and fruit-shape normality were made with the 91 isolates, mycelial growth at sawdust-based medium showed highly positive correlation with that at PDA, while fruit yield was negatively correlated with mycelial growth in PDA and sawdust-based medium.

• Korean Journal of Environmental Biology
• /
• v.35 no.3
• /
• pp.389-397
• /
• 2017

The purpose of this study was to investigate the characteristics of species by comparing the external shape traits and skull size of Tscherskia triton in Jeju Island from May 2014 to November 2016. Body weight, head-body length, ear length, and hind-foot length were not statistically significant (p>0.05), but tail length was statistically significant in females compared to males (p=0.003). To examine the secondary sexual dimorphism characteristics of the collected T. triton, B_HR, T_HR, E_HR, and H_HR were calculated based on the head-body length, and only T_HR was statistically significant (p=0.003). Because of comparing male and female averages, among the 21 traits, the greatest length of skull (GLS; p=0.020) and occipitonasal length (ONL; p=0.014) were statistically significant and length of incisive foramen (LIF) was statistically significant, when the significance level was 90%. However, the other 18 traits did not show statistically significant differences between males and females (p>0.05). Other than GLS, ONL, interorbital breadth (IB), and breadth of occipital foramen (BOF), there was female-biased SSD. The results of this study are the analysis of external morphology and skull characteristics of T. triton in Jeju Island and will be used as basic data to understand the morphological characteristics of T. triton. In addition, the data can be used as a basic information to compare characteristics of T. triton, which is known as a single species, inhabited in China and Russia. The data will play an important role in biogeography and ecology research of T. triton, based on geographical conditions, climate effects, and habitat environment.