• 한국응용과학기술학회지
• /
• 제18권1호
• /
• pp.60-66
• /
• 2001

Allylaliphatic carboxylate oligomers were prepared from polymerization giving allyl aliphatic carboxylates in the presence of potassium persulfate in methanol and the ${\alpha}-sulfonation$ of these allyl aliphatic carboxylates oligomers were carried by direct addition of dry sulfur trioxide. The dispersing performance of oligomer type anionic surfactants and SDS in the aqueous suspension of $Fe_{2}O_{3}$ and $Tio_{2}$ particles were evaluated by particle size distribution and ${\zeta}-potential$ measurement. As results, the particles of $Fe_{2}O_{3}$ and $Tio_{2}$ were flocculated by addition of small amount of oligomer type anionic surfactants and SDS, then the flocks redispersed by more addition oligomer type anionic surfactants and SDS. The dispersion and flocculation were observed in lower concentration range of oligomer type anionic surfactants than SDS.

• Advances in materials Research
• /
• 제9권1호
• /
• pp.1-14
• /
• 2020

The hybrid method of three-dimensional ion implantation and electric arc is presented as a novel plasma-ion technique that allows by means of high voltage pulsed and electric arc discharges, the bombardment of non-metallic and metallic ions then implanting upon the surface of a solid surface, especially out of metallic nature. In this study AISI/SAE 4140 samples, a tool type steel broadly used in the industry due to its acceptable physicochemical properties, were metallographically prepared then surface modified by implanting titanium and simultaneously titanium and nitrogen particles during 5 min and 10 min. The effect of the ion implantation technique over the substrate surface was analysed by characterization and electrochemical techniques. From the results, the formation of Ti micro-droplets upon the surface after the implantation treatment were observed by micrographs obtained by scanning electron microscopy. The presence of doping particles on the implanted substrates were detected by elemental analysis. The linear polarization resistance, potentiodynamic polarization and total porosity analysis demonstrated that the samples whose implantation treatment with Ti ions for 10 min, offer a better protection against the corrosion compared with non-implanted substrates and implanted at the different conditions in this study.

• 한국환경과학회지
• /
• 제33권2호
• /
• pp.121-129
• /
• 2024

The study investigated the effect of thermo-alkaline pretreatment on the solubilization of polyhydroxybutyrate (PHB) and its potential to enhance of thermophilic anaerobic digestion, focusing on biochemical methane potential (BMP) and methane production rate, using two different particle sizes of PHB (1500 ㎛ and 400 ㎛). Thermo-alkaline pretreatment tests were conducted at 90 ℃ for 24 hours with varying NaOH dosages from 0-80% (w/w). BMP tests with untreated PHB exhibited methane production ranging from 150.4~225.4 mL CH₄/g COD and 21.5~24.2 mL CH₄/g VSS/d, indicating higher methane production for smaller particle sizes of PHB, 400 ㎛. Thermo-alkaline pretreatment tests achieved a 95.3% PHB solubilization efficiency when 400 ㎛ PHB particles were treated with 80% NaOH dosage at 90 ℃ for 24 hours. BMP tests with pretreated PHB showed substantial improvement in thermophilic anaerobic digestion, with an increase of up to 112% in BMP and up to 168% in methane production rate. The results suggest that a combined pretreatment process, including physical (400 ㎛ PHB particles) and thermo-alkaline (90 ℃, 40-80% NaOH dosage, and 24 hours reaction time), is required for high-rate thermophilic anaerobic digestion of PHB with enhanced methane production.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.382-398
• /
• 2017

This study was conducted to identify the potential of Quercus mongolica (QUM), Pinus densiflora (PID) and Pinus rigida (PIR) as a raw material for pellet production. Larix kaempferi (LAK), which has mostly been used for pellet production in Korea, was also used as a control. All specimens contained very minimal amounts of sulfur and chlorine. Ash content of LAK was the lowest, followed by PID, PIR and QUM. For the size distribution, the mass fraction between 0.42 mm and 0.25 mm was the highest in PIR. Most fuel characteristics of the produced wood pellets improved with the use of 12% moisture content (MC) particles and the increase of the ratio of length to diameter of a hole in flat-die (L/D ratio). When the MC, bulk density and durability of QUM, PID, PIR and LAK pellets was compared with the standards of the KFRI and ISO, the use of wood particles of 12% MC and flat-die with an L/D ratio of 5.00 for PID particles are suitable for high-quality pellets in the aspects of all fuel characteristics. For PIR and QUM, further work is needed to seek the optimum conditions for the production of high-quality and durable pellets.

• 천문학회지
• /
• 제36권1호
• /
• pp.1-12
• /
• 2003

Nonthermal particles can be produced due to incomplete thermalization at collisionless shocks and further accelerated to very high energies via diffusive shock acceleration. In a previous study we explored the cosmic ray (CR) acceleration at cosmic shocks through numerical simulations of CR modified, quasi-parallel shocks in 1D plane-parallel geometry with the physical parameters relevant for the shocks emerging in the large scale structure formation of the universe (Kang & Jones 2002). Specifically we considered pancake shocks driven by accretion flows with $U_o = 1500 km\;s^{-l}$ and the preshock gas temperature of $T_o = 10^4 - 10^8K$. In order to consider the CR acceleration at shocks with a broader range of physical properties, in this contribution we present additional simulations with accretion flows with $U_o = 75 - 1500 km\;s^{-l}$ and $T_o = 10^4K$. We also compare the new simulation results with those reported in the previous study. For a given Mach number, shocks with higher speeds accelerate CRs faster with a greater number of particles, since the acceleration time scale is $t_{acc}\;{\propto}\;U_o^{-2}$. However, two shocks with a same Mach number but with different shock speeds evolve qualitatively similarly when the results are presented in terms of diffusion length and time scales. Therefore, the time asymptotic value for the fraction of shock kinetic energy transferred to CRs is mainly controlled by shock Mach number rather than shock speed. Although the CR acceleration efficiency depends weakly on a well-constrained injection parameter, $\epsilon$, and on shock speed for low shock Mach numbers, the dependence disappears for high shock Mach numbers. We present the 'CR energy ratio', ${\phi}(M_s)$, for a wide range of shock parameters and for $\epsilon$ = 0.2 - 0.3 at terminal time of our simulations. We suggest that these values can be considered as time-asymptotic values for the CR acceleration efficiency, since the time-dependent evolution of CR modified shocks has become approximately self-similar before the terminal time.

• 대한환경공학회지
• /
• 제31권12호
• /
• pp.1129-1134
• /
• 2009

나노기술이 발전하면서 나노 입자의 특성과 나노 독성에 대한 관심도 증가하고 있다. 그러나 나노 입자의 식물독성에 대한 연구는 부족하다. 본 연구에서는 Zn, ZnO 나노 입자의 각 농도 별로 오이 묘목을 수경 재배하여 식물독성을 조사하였다. 실험 결과, Zn, ZnO 나노 입자의 특성은 deionized water에서 보다 영양용액에서 응집이 더 일어났다. 오이 묘목의 생체량은 100 mg/L 이상에서 유의적으로 감소하였으며 독성은 $Zn^{2+}$> Zn> ZnO 나노 입자순으로 나타났다. TEM 사진 결과, Zn, ZnO 나노 입자는 뿌리 세포벽에 붙어 있었으며 뿌리 세포 내에서도 응집해 있는 것이 관찰되었다.

• 방사성폐기물학회지
• /
• 제2권2호
• /
• pp.135-143
• /
• 2004

국산화강암에 대한U(VI) 수착에 대한 실험적 연구를 지화학적 매개변수들인 접촉시간, pH, 이온강도, 탄산염 농도 등의 함수로 회분식으로 수행하였다. 국산 화강암에 대한 U(VI)의 수착의 분배계수 $K_{d}$ 는 실험 조건에 따라 약 1-200 mL/g의 값의 범위를 가지는 것으로 나타났다. 화강암 입자에 대한 U(VI)의 수착은 접촉시간, pH 및 탄산염 농도 등에는 크게 의존하였으나 이온강도에는 크게 의존하지 않는 것으로 나타났다. 화강암 입자들에 대한U(VI)의 수착은 용액에서 pH와 탄산염의 농도에 의존하는 우라늄 화학종과 밀집한 관계가 있음을 알 수 있었다. 또한 속도론적 수착 실험에 의하여 2 단계 일차식 속도론적 거동이 화강암 입자들에 대한 우라늄의 속도론적 수착을 지배할 수 있는 것으로 유추되었다. pH 7 이상의 알칼리 영역에서 화강암에 대한 우라늄의 수착이 크게 감소되었는데 이는 화학종 계산에 의해 예측된 바에 따라 음이온의 U(VI)-탄산염 복합체 형성에 기인하였을 것이다.

• 한국농공학회지
• /
• 제31권3호
• /
• pp.57-69
• /
• 1989

The study was carried out for the strength parameter of coarse grained Soil and slope stability analysis of earth dam. The test samples were taken fifteen kinds of soil from cohesive soil to coarse gravel. The degree of compaction of test samples for shear test and permeability test was chosen 95 percentage of maximum dry density. The results of this study are as follows ; 1.The maximum dry density(Yd) of coarse grained soil increase in proportion to coarse particles(P) with the relation of Y d= 1.609+0.0043P. 2.The coefficients of permeability(k) decrease by the increase of fine particles(n) with the relation of k=0.0426e-0 185n. 3.The cohesions of soil decrease by the increase of coarse particles, but internal friction angles are more increased in same condition. 4.The internal friction angles(${\Phi}$) decrease in inverse proportion to void ratio(e) with the relation of ${\Phi}$ = 73.068 - 69.268e. 5.The strength parameters( Ct ${\Phi}$t) by triaxial compression test are clearly smaller than that (Cd, ${\Phi}$d) by direct shear test in fine grained soil, but the differences between both parameters are a little in coarse grained soil.The relations of both parameters are as follows; Ct = O.544Cd + 0.04 ${\Phi}$t= 1.282${\Phi}$d-2306 6.In cohesive soil, the strength parameters( Cl ${\Phi}$l) by large size shear test apparatus are similar to the strength parameters(Cs , ${\Phi}$s) by small size shear test appratus, but Cs and ${\Phi}$s values are larger than Cl and ${\Phi}$l values from 10 percentage to 20 percentage in coarse grained soil. 7.The fine grained soil is inappropriate to high dam more than 20 meters and it must be taken coarse grained soil with high internal friction angle for high dam.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.319-326
• /
• 2014

Mineral dust in the polar snow plays an important role both in the climate system of the Earth and in global biogeochemical cycles. Analysis of the concentration and the particle size distribution of mineral dust has been carried out in the snow from the Antarctic surface snow and the Greenland snowpit. Among the various particle size determination techniques, a Multisizer 3 Coulter Counter in a class 100 clean bench counted all particles between 1.1 and $30.0{\mu}m$ with a $50{\mu}m$ aperture tube. The aperture tube size, the concentration of electrolytes and the accuracy of the particle size distribution were determined in this study. The number concentrations from the Antarctic surface snow were 81,843 particles $mL^{-1}$, but those from the Greenland snowpit were 10,666 particles $mL^{-1}$. In the volume distribution, the distributions of mineral dust in both the Antarctic surface snow and the Greenland snowpit showed lognormal distribution in the size interval 1.1 to $6.0{\mu}m$ with the mode, 3.562 and $3.836{\mu}m$, respectively. The analysis technique using a coulter counter for mineral dust could be used for reconstructing paleoclimates from polar ice cores.

• 대한기계학회논문집B
• /
• 제41권4호
• /
• pp.221-228
• /
• 2017

본 연구에서는 부엌이나 밀폐 작업장과 같이 PM2.5 초미세먼지가 고농도로 발생하는 장소에 적용 가능한 무필터 초미세먼지 정화기술을 제안하고자 한다. 이런 장소에서는 기존 필터기반의 공기정화기는 높은 필터교체비용으로 인해 적용이 불가능하여 작업자가 고농도 PM2.5 초미세먼지에 직접 노출되는 심각한 문제가 있다. 입자가 수 마이크론의 크기로 성장하면 증가한 관성으로 쉽게 제거가능하기 때문에 본 연구에서는 초미세먼지의 응축성장에 집중하였다. 물분무를 이용하는 공기포화기, 수증기를 응축시켜 입자를 성장시키는 응축기, 멀티임팩터 제거기로 구성된 시제품을 개발하였고 낮은 유량의 랩스케일 실험에서 실제 공기청정기 유량 조건에서 그 성능을 검증하였다.