• Title/Summary/Keyword: L-J Potential

검색결과 337건 처리시간 0.026초

Improvements in Nuclear Transfer Procedures will Increase Commercial Utilization of Animal Cloning - Review -

  • Stice, S.L.;Gibbons, J.;Rzucidlo, S.J.;Baile, C.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제13권6호
    • /
    • pp.856-860
    • /
    • 2000
  • Cloning technology continues to capture widespread attention by the international news media and biomedical and agricultural industries. The future uses of this technology could potentially contribute to major advances in biomedical and agricultural sciences. Cloned transgenic dairy cattle possessing milk promoters directing transgenes will produce pharmaceutical proteins in their milk faster, more efficiently and less expensively than transgenic cattle created using microinjection techniques. Additionally, cloned transgenic fetuses and animals may become a source of cells, tissue and organs for xenotransplantation. Lastly, but maybe most importantly, enhanced production traits and disease resistance may be realized in animal agriculture by utilizing these new technologies. The recent advances in the cattle cloning technology are important but there are still major obstacles preventing widespread commercial use of this technology. The type of donor nucleus, recipient cytoplasm, and cloning procedures used will impact the potential number of clones produced and the uses of the technology. In addition, the new advances in cloning methodology have not improved the relatively low pregnancy rates or reduced the incidence of health problems observed in cloned offspring. These problems may require novel techniques to decipher their cause and new methods of preventing and/or diagnosing them in the preimplantation embryo. The commercial potential is enormous for cloning technology; however, little has been done to improve the efficiencies of the procedure. Improving procedural efficiencies is a critical developmental milestone especially for potential uses of cloning technology in animal agriculture.

표면균열 형상측정을 위한 다채널 DCPD 시스템의 개발 (Development of Multi-Channel DCPD System for Surface Crack Measurement)

  • 심도준;박호림;최재붕;김영진
    • 한국가스학회지
    • /
    • 제4권1호
    • /
    • pp.49-54
    • /
    • 2000
  • 구조물에 존재하는 균열을 측정하기 위해 DCPD법이 널리 사용되고 있다. 본 연구를 통해 표면균열의 성장뿐만 아니라 형상변화도 측정 가능한 다채널 DCPD 시스템을 개발하였고, 이를 위한 전용 소프트웨어를 개발하였다. DCPD 시스템을 CT 시편에 적용하여 그 효용성을 검증한 후, 넓은 평판에 존재하는 표면균열 측정실험에 시스템을 적용하였다. 표면균열 성장시 개발한 다채널 DCPD 시스템을 적응함으로써 효과적이고 정확한 균열측정이 가능하다는 결론을 얻었다.

  • PDF

Detection of Deep Subsurface Cracks in Thick Stainless Steel Plate

  • Kishore, M.B.;Park, D.G.;Jeong, J.R.;Kim, J.Y.;Jacobs, L.J.;Lee, D.H.
    • Journal of Magnetics
    • /
    • 제20권3호
    • /
    • pp.312-316
    • /
    • 2015
  • Unlike conventional Eddy Current Test (ECT), Pulsed Eddy Current (PEC) uses a multiple-frequency current pulse through the excitation coil. In the present study, the detection of subsurface cracks using a specially designed probe that allows the detection of a deeper crack with a relatively small current density has been attempted using the PEC technique. The tested sample is a piece of 304 stainless steel (SS304) with a thickness of 30mm. Small electrical discharge machining (EDM) notches were put in the test sample at different depths from the surface to simulate the subsurface cracks in a pipe. The designed PEC probe consists of an excitation coil and a Hall sensor and can detect a subsurface crack as narrow and shallow as 0.2 mm wide and 2 mm deep. The maximum distance between the probe and the defect is 28 mm. The peak amplitude of the detected pulse is used to evaluate the cracks under the sample surface. In time domain analysis, the greater the crack depth the greater the peak amplitude of the detected pulse. The experimental results indicated that the proposed system has the potential to detect the subsurface cracks in stainless steel plates.

Cu(InGa)$Se_2$ 박막의 Cu/(In+Ga) 조성비에 따른 전기적 물성특성 (Physical Properties with Cu/(In+Ga) Ratios of Cu(InGa)$Se_2$ Films)

  • 김석기;이정철;강기환;윤경훈;송진수;박이준;한상옥
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1584-1586
    • /
    • 2002
  • CuIn$Se_2$ (CIS) and related compounds such as Cu($In_xGa_{1-x})Se_2$(CIGS) have been studied by their potential for use in photovoltaic devices. CIS thin film materials which have high absorption coefficient and wide bandgap, have attracted much attention as an alternative to crystalline and amorphous silicon solar cells currently in use. Cu-rich CIGS film have very low resistivity, due to coexistence of the semimetallic $Cu_{2-x}Se$. In-rich CIGS films show high resistivity, since these films are compensated films without the $Cu_{2-x}Se$ phase. Optical properties of the CIGS films also change in accordance with the resistivity for the Cu/(In+Ga) ratio. The Cu-rich films have different spectra from In-rich films in near infrared wavelengths.

  • PDF

Detecting Malware in Cyberphysical Systems Using Machine Learning: a Survey

  • Montes, F.;Bermejo, J.;Sanchez, L.E.;Bermejo, J.R.;Sicilia, J.A.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권3호
    • /
    • pp.1119-1139
    • /
    • 2021
  • Among the scientific literature, it has not been possible to find a consensus on the definition of the limits or properties that allow differentiating or grouping the cyber-physical systems (CPS) and the Internet of Things (IoT). Despite this controversy the papers reviewed agree that both have become crucial elements not only for industry but also for society in general. The impact of a malware attack affecting one of these systems may suppose a risk for the industrial processes involved and perhaps also for society in general if the system affected is a critical infrastructure. This article reviews the state of the art of the application of machine learning in the automation of malware detection in cyberphysical systems, evaluating the most representative articles in this field and summarizing the results obtained, the most common malware attacks in this type of systems, the most promising algorithms for malware detection in cyberphysical systems and the future lines of research in this field with the greatest potential for the coming years.

교류전류를 이용한 새로운 비파괴탐상법의 개발;표면결함과 이면결함의 평가 및 실기 부재의 결함 검출 (Development of the Advanced NDI Technique Using an Alternating Current : the Evaluation of surface crack and blind surface crack and the detection of defects in a field component)

  • 김훈;임재규
    • Journal of Welding and Joining
    • /
    • 제13권2호
    • /
    • pp.42-52
    • /
    • 1995
  • In the evaluation of aging degradation on the structural materials based on the fracture mechanics, the detection and size prediction of defect are very important. Aiming at nondestructive detection and size prediction ol defect with high accuracy and resolution, therefore, an lnduced Current Focusing Potential Drop(ICFPD) technique has been developed. The principle of this technique is to induce a focusing current at an exploratory region by an induction wire flowing an alternating current(AC) that is a constant ampere and frequency. Defects are assessed with the potential drops that are measured the induced current on the surface of metallic material by the potential pick-up pins. In this study, the lCFPD technique was applied for evaluating the location and size of the surface crack and blind crack made in plate specimens, and also for detecting the defects existing in valve, a field component, that were developed by SCC etc. during the service. The results of this present study show that surface crack and blind crack are able to defect with potential drop. these cracks are distinguished with the distribution of potential drop, and the crack depths can be estimated with each normalized potential drop that are parameters estimating the depth of each type crack. In the field component, the defects estimated by experiment result correspond with those in the cutting face of the measuring point within a higher sensitivity.

  • PDF

Gene Microarray Analysis for Porcine Adipose Tissue: Comparison of Gene Expression between Chinese Xiang Pig and Large White

  • Guo, W.;Wang, S.H.;Cao, H.J.;Xu, K.;Zhang, J.;Du, Z.L.;Lu, W.;Feng, J.D.;Li, N.;Wu, C.H.;Zhang, L.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제21권1호
    • /
    • pp.11-18
    • /
    • 2008
  • We created a cDNA microarray representing approximately 3,500 pig genes for functional genomic studies. The array elements were selected from 6,494 cDNA clones identified in a large-scale expressed sequence tag (EST) project. These cDNA clones came from normalized and subtracted porcine adipose tissue cDNA libraries. Sequence similarity searches of the 3,426 ESTs represented on the array using BLASTN identified 2,790 (81.4%) as putative human orthologs, with the remainder consisting of "novel" genes or highly divergent orthologs. We used the gene microarray to profile transcripts expressed by adipose tissue of fatty Chinese Xiang pig (XP) and muscley Large White (LW). Microarray analysis of RNA extracted from adipose tissue of fatty XP and muscley LW identified 81 genes that were differently expressed two fold or more. Transcriptional differences of four of these genes, adipocyte fatty acid binding protein (aP2), stearyl-CoA desaturase (SCD), sterol regulatory element binding transcription factor 1 (SREBF1) and lipoprotein lipase (LPL) were confirmed using SYBR Green quantitative RT-PCR technology. Our results showed that high expression of SCD and SREBF1 may be one of the reasons that larger fat deposits are observed in the XP. In addition, our findings also illustrate the potential power of microarrays for understanding the molecular mechanisms of porcine development, disease resistance, nutrition, fertility and production traits.

Mixotrophic Production of Marine Microalga Phaeodactylum tricornutum on Various Carbon Sources

  • Ceron Garcia M.C.;Camacho F.Garcia;Miron A.Sanchez;Sevilla J.M.Fernandez;Chisti Y.;Grima E.Molina
    • Journal of Microbiology and Biotechnology
    • /
    • 제16권5호
    • /
    • pp.689-694
    • /
    • 2006
  • We investigated the potential use of various carbon sources (fructose, glucose, mannose, lactose, and glycerol) for culturing Phaeodactylum tricornutum UTEX-640 in mixotrophic and heterotrophic batch cultures. Concentrations of carbon substrates tested ranged from 0.005 M to 0.2 M. P. tricornutum did not grow heterotrophically on any of the C-sources used, but successive additions of organic carbon in mixotrophic growth mode substantially increased the biomass concentration and productivity relative to photoautotrophic controls. The maximum biomass productivities in mixotrophic cultures for glycerol, fructose, and glucose were 21.30 mg/l h, 15.80 mg/l h, and 10.20 mg/l h, respectively. These values were respectively 10-, 8-, and 5-fold higher than those obtained in the corresponding photoautotrophic control cultures. Mannose and lactose did not significantly affect microalgal growth. The biomass lipids, eicosapentaenoic acid (EPA) and pigments contents were considerably enhanced with glycerol and fructose in relation to photoautotrophic controls. The EPA content was barely affected by the sugars, but were more than 2-fold higher in glycerol-fed cultures than in photoautotrophic controls.

The Effect of Cr Dosage on FePt Nanoparticle Formation

  • Won, C.;Keavney, D.J.;Divan, R.;Bader, S.D.
    • Journal of Magnetics
    • /
    • 제11권4호
    • /
    • pp.182-188
    • /
    • 2006
  • The search for high-density recording materials has been one of most active and vigorous field in the field of magnetism. $FePt-L1_{0}$ nanoparticle has emerged as a potential candidate because of its high anisotropy. In this paper, we provide an overview of recent work at Argonne National Laboratory that contributes to the ongoing dialogue concerning the relation between structure and properties of the FePt nanoparticle system. In particular we discuss the ability to control structure and properties via dosing with Cr. Cr-dosed FePt films were grown via molecular beam epitaxy and annealed at $550^{\circ}C$ in an ultrahigh vacuum chamber, and were studied with the surface magneto-optic Kerr effect (SMOKE), scanning electron microscopy (SEM) and x-ray magnetic circular dichroism (XMCD). We found that small dosage of Cr helps to generate $L1_{0}$ phase FePt magnetic nanoparticles with small size, defined shape and regular spatial distribution on MgO (001) substrate. The nanostructures are ferromagnetic with high magnetic coercivity (${\sim}0.9T$) and magnetic easy axis in the desired out-of-plane orientation. We also show that controlling the lateral region where nanostructures exist is possible via artificial patterning with Cr.

Corrosion behaviors of SS316L, Ti-Gr.2, Alloy 22 and Cu in KURT groundwater solutions for geological deep disposal

  • Gha-Young Kim;Junhyuk Jang;Minsoo Lee;Mihye Kong;Seok Yoon
    • Nuclear Engineering and Technology
    • /
    • 제54권12호
    • /
    • pp.4474-4480
    • /
    • 2022
  • Deep geological disposal using a multibarrier system is a promising solution for treating high-level radioactive (HLRW) waste. The HLRW canister represents the first barrier for the migration of radionuclides into the biosphere, therefore, the corrosion behavior of canister materials is of significance. In this study, the electrochemical behaviors of SS316L, Ti-Gr.2, Alloy 22, and Cu in naturally aerated KAERI underground research tunnel (KURT) groundwater solutions were examined. The corrosion potential, current, and impedance spectra of the test materials were recorded using electrochemical methods. According to polarization and impedance measurements, Cu exhibits relatively higher corrosion rates and a lower corrosion resistance ability than those exhibited by the other materials in the given groundwater condition. In the anodic dissolution tests, SS316L exposed to the groundwater solution exhibited the most uniform corrosion, as indicated by its surface roughness. This phenomenon could be attributed to the extremely low concentration of chloride ions in KURT groundwater.