• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.58-64
• /
• 2015

This study aimed to investigate the concentration distributions and formation characteristics of trihalomethanes (THMs) in drinking water supplies to rural communities. Water samples were collected twice from 40 rural households located on the outskirts of Chuncheon city of Gangwon Province in the summers of 2010 and 2011, and urban drinking water samples were collected from 20 faucets during the same period in 2011 for comparison purpose. Water temperature, pH, and residual chlorine (total and free) concentrations were measured in the field, and samples were analyzed for dissolved organic carbon (DOC) and THM concentrations in the laboratory. The average DOC concentrations in rural water samples were not greatly different between groundwater (n = 20) and surface water (n = 20) which were used as sources for drinking water (1.81 vs. 1.91 mg/L). However, the average concentrations of total THMs (TTHMs) in groundwater ($9.77{\mu}g/L$) were much higher than those in surface water ($2.85{\mu}g/L$) and similar to those in urban drinking water samples ($10.8{\mu}g/L$). Unlike urban water supply, rural water (particularly groundwater) contained more brominated THM species such as dibromochloromethane (DBCM), suggesting its relatively high content of bromide ion (Br-). This study showed that rural water supplies have different THM formation characteristics from urban water supplies, probably due to their differences in source water quality properties.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.181-187
• /
• 2006

This study was carried to survey the removal characteristics of BPA using coagulation process by PAC and PAHCS. BPA removal for PAC and PAHCS was 20.4 with 8.7 Al mg/L and 6.8 Al mg/L, respectively. Removal of BPA was lower than $UV_{254}$ and DOC but removal characteristics were similar. BPA removal for PAC and PAHCS was most high in pH 6.5 and 7.0 respectively. The time for removal by mixing time was 40 min in PAC and 30 min in PAHCS. When powdered activated carbon 50 mg/L was added in coagulation process, a high remove of BPA (61%) was noticed. Specially BPA was highly increase powdered activated carbon 5 mg/L alone. These results will be appliable in the conventional water treatment plants for improvement of water treatment system.

• Journal of Environmental Science International
• /
• v.15 no.4
• /
• pp.379-384
• /
• 2006

Eight USA soils were used for this study. The purpose of this study is to illustrate the characteristics of metals in the soil based on the sequential extraction with increasing pH. Extracts were analyzed for metals by ICP-MS and for dissolved organic carbon(DOC). As the pH increasing, the DOC extracted in each increment initially decreased and reached the minimum at pH 3 and then increased substantially at higher pH values. According to the pH increasing, the extraction of Ca, Cu, and Zn were illustrated as L type. It was found that there were strong correlation between the extracted Fe and DOC($r=0.64{\sim}0.97$).

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2005

The effect of ozone oxidation on biodegradability of leachate was studied. Ozone oxidation process was used as pre-treatment process to enhance performance of biological process in treating landfill leachate. Optimum ozone dosing rate and contact time in this experiment was $160mg\;O_3/L$ hr and 45 minutes, respectively. Biodegradability was enhanced 5.08% by ozone oxidation. The ratio of ozone demand/DOC concentration was $0.049{\sim}0.091mg\;O_3/mg$ DOC. The increase of biodegradability depending on ozone dosing rate(D) and contact time(T) can be expressed as follows ; ${\Delta}E=0.00479{\cdot}D^{0.773}{\cdot}T^{0.800}$ The biodegradation rate of DOC was increased proportionally with the increase of ozone dosing rate and contact time irrespective of landfill site age. The increase of biodegradability by ozone addition was not satisfactory. It is hard to expect significant increase in biodegradability by ozone treatment only. Thus, it is evaluated that ozone oxidation can not increase biodegradability significantly in concentrated wastewater composed of complex organic compound such as leachate.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.27-35
• /
• 2001

This aim of the work presented in this paper is to investigate the factors that affcet chlorine decay and to develop functional relationships that can be used to enhance the durability of network models. predictive relationships were established that correlated the rate of chlorine decay to the various water conditions such as DOC, N $H_3$-N, initial chlorine, contact time, temperature and pH values. Free chlorine residual decreased with increasing temperature, DOC, N $H_3$-N, reaction time and chlorine dose. At 2$0^{\circ}C$, pH 7, The initial chlorine demand per mg as DOC/L and mg as N $H_3$-N/L was about 0.43, 2.69 mg/$\ell$ respectively at 180 minutes contact time. The Reaction between chlorine and humic acids was lasted intil 48hr, but the reaction between chlorine and N $H_3$-N was almost completed in 180 min. When the temperature is raised by 1$0^{\circ}C$, chlorine is more consumed about 0.25 mg/$\ell$ in the absence of organic substances and it is more consumed about 3.4 mg/$\ell$ in the presence of humic acid (5 mg/$\ell$) in water at pH 7 for 180 min. Regression Analysis created the resulting prediction equation for the chlorine decay in a SPSS package of the computer system. The model is as follows; $C_{t}$=1.239+0.707(Co)-0.000529(Time)-0.0112(Temp)+0.02227(pH)-0.42(DOC)-2.132(N $H_3$-N).).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.82-87
• /
• 2013

In this work, the 1L grade integrated metal DOC/DPF filter that can install in engine manifold position was developed to investigate the effect of platinum-coating amount of filter on the improvement of filter activation temperature and reduction of particulate matter (PM). This filter was installed in 2.9L CI engine which meets the EURO-4 emission regulation. Tests for PM reduction efficiency of filter were conducted under ND-13 mode with full-load test condition. It was revealed that the time to reach the activation temperature of metal filter ($280^{\circ}C$) was shorter as the amount of platinum-coating increased. This short activation time can be helpful for the reduction of CO and HC emissions during cold start condition. At the same time, PM reduced as the coating amount increased. The reduction percentage of $DOC_{40}$, $DOC_{20}$, and $DOC_0$ were 96.7% (2.34 mg/kW'h), 95.1% (3.47 mg/kW'h), and 94.5% (3.69 mg/kW'h) compared to previous result (71.4 mg/kW'h), respectively.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.507-517
• /
• 2010

Long-term monitoring was conducted to identify the runoff characteristics of non-point source according to the three forest types (deciduous forest, coniferous forest and mixed forest) in this study. Rainfall events of each deciduous forest, coniferous forest, and mixed forest were 10, 8, 12, respectively. Average runoff depth and coefficients of each forest type were founded to be coniferous forest and were followed by others in turns : deciduous forest, and mixed forest because various conditions (i.e., rainfall property, Antecedent Precipitation Index (API), soil property, slope, and forest management) could change runoff characteristics. In the analysis of the first flush phenomenon, it showed that SS and T-P were sensitive for the first flush phenomenon. The first flush phenomenon of them were showed differently by rainfall intensity, rainfall duration, and amount of rainfall. The research results indicated that range of the Event Mean Concentration (EMC) values in deciduous forest were 0.8~2.4 mg/L for $BOD_5$, 2.0~13.4 mg/L for $COD_{Mn}$, 1.3~2.9 mg/L for DOC, 1.150~3.913 mg/L for T-N, 0.010~0.350 mg/L for T-P and 3.1~291.8 mg/L for SS and in coniferous forest were 0.8~2.2 mg/L for $BOD_5$, 1.9~3.6 mg/L for $COD_{Mn}$, 1.0~2.0 mg/L for DOC, 1.025~2.957 mg/L for T-N, 0.002~0.084 mg/L for T-P and 0.8~5.4 mg/L for SS. Also, range of the EMC values in mixed forest were 1.3~2.3 mg/L for $BOD_5$, 2.4~4.8 mg/L for $COD_{Mn}$, 1.1~2.1 mg/L for DOC, 0.385~2.703 mg/L for T-N, 0.016~0.080 mg/L for T-P and 2.3~30.0 mg/L for SS.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.6
• /
• pp.539-544
• /
• 2013

This study provides a solution method for the inverse heat conduction problem based on a combination of a public domain CAE (computer aided engineering) software and a commercial CAO (computer aided optimization) software. The solver system has been implemented without any in-house coding. The proposed method is simple to implement. Moreover, it can be easily reproduced.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.37-46
• /
• 2007

A feasibility test was conducted to evaluate the addition of turbidity substance in a coagulation process to remove natural organic matters (NOM), the precursor of disinfection by-products (DBPs). The experimental water sources were synthetic water containing 5 mg/L of humic acid and 50 mg/L of NaHCO3 and drinking water resource of Ulsan city (S Dam water, D Dam water and Nak-Dong raw water). The examined turbidity substances were kaolin, acid clay, and modified clay (0.38 meq $NH_4{^+}-N/g$ clay). In Jar tests at different concentrations of the turbidity substances (5, 10, 15, 20, 30 mg/L) using the synthetic water, the turbidity substances improved the removal of turbidity, UV-254 absorbance and dissolved organic carbon (DOC) by 23.8-38.1%, 17.0-24.5% and 2.5-44.5%, respectively. The modified clay showed higher removal efficiencies than other substances. In Jar tests using the drinking water, 10 and 20 mg/L of modified clay enhanced the removal efficiencies of turbidity, UV-254 absorbance, DOC, trihalomethane formation potential (THMFP), and haloacetic acid formation potential (HAAFP) by 3.0~4.3%, 19.1~29.0%, 12~34.9%, 4.9~36.7%, and 1.6~30.2%, respectively.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.149-149
• /
• 2002