• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.693-702
• /
• 2015

This paper presents the performance characteristics of a Darrieus-type vertical-axis wind turbine (VAWT) with National Advisory Committee for Aeronautics (NACA) airfoil blades. To estimate the optimum shape of the Darrieus-type wind turbine in accordance with various design parameters, we examine the aerodynamic characteristics and separated flow occurring in the vicinity of the blade, the interaction between the flow and blade, and the torque and power characteristics that are derived from it. We consider several parameters (chord length, rotor diameter, pitch angle, and helical angle) to determine the optimum shape design and characteristics of the interaction with the ambient flow. From our results, rotors with high solidity have a high power coefficient in the low tip-speed ratio (TSR) range. On the contrary, in the low TSR range, rotors with low solidity have a high power coefficient. When the pitch angle at which the airfoil is directed inward equals $-2^{\circ}$ and the helical angle equals $0^{\circ}$, the Darrieus-type VAWT generates maximum power.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.6
• /
• pp.761-768
• /
• 1999

This paper is studied to find the optimum condition of double-inlet Sirocco fan installed in an indoor PAC for low noise operation by the Taguchi method. The goal of this study is to obtain the best combination of each control factor which results in a desired flowrate of Sirocco fan with minimum variability. In this study, the parameter design of the Taguchi method is adopted for robust design by the dynamic characteristic analysis using orthogonal arrays and S/N ratios. The flowrate measurements are conducted by using a multiple-nozzle-type fan tester according to the orthogonal array L9($3^4$). The results of this study can be summarized as follows ; (i) The optimum condition of control factor is a set of where A is an inner to outer diameter ratio($D_1/D_2$), B is a width to outer diameter ratio($L/D_2$), C is a blade attachment angle(${\theta}$) and D is a number of blade(Z), (ii) The flowrate under the optimum condition satisfies the equation $y=0.0384{\cdot}M$ where M is a signal factor, namely number of revolution. The flowrate performance improves about 7.3% more largely as compared with the current condition, which results in about 35RPM reduction of number of revolution for the target flowrate $18.5m^3/min$, and (iii) The sensitivity analysis shows that the major factors in contribution to flowrate performance are A, B, and D ; the percentage contributions of each control factor are 44.01%(Z), 26.77%($D_1/D_2$) and 20.42%($L/D_2$).

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.1
• /
• pp.83-87
• /
• 2003

The study evaluates the enzymatic dry matter (DM) degradability and water holding capacity of leaf and stem fractions of orchardgrass (Dactylis glomerata L.) at different growth stages with or without the presence of surfactant Tween 80. While Tween 80 significantly (p<0.05) increased water and enzyme holding capacities in the leaf blades fraction, less was observed in the fraction of leaf sheath and stem of orchardgrass. The enzyme holding capacity in the leaves was also altered more than that for water holding capacity. This resulted in the increased rate and extent of enzymatic hydrolysis of the leaf blade fractions at two growth stages, whereas little was with leaf sheath and stem fractions. It was also observed that at 0.005% concentrations of Tween 80 the enzymatic DM degradability of young leaf blades was higher (p<0.05) by 20-30% compared to that of the control, as well as for water and enzyme holding capacity. For matured leaf blades the DM degradability were increased with over 0.01% concentrations of the surfactant, but the increase was less than leaf blades of young orchardgrass. This result suggests the possibility of using the surfactant Tween 80 to improve forage digestibility in the rumen.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2C
• /
• pp.61-68
• /
• 2012

In general, verticality error necessarily occurs in marine pile foundation due to construction error or marine environmental effects. In marine structure, design by vertical load rather than horizontal load is dominant, but in the offshore wind turbine foundation, horizontal load is dominant. As the structure type that has dynamic movement by blade rotation, verticality error may have structurally significant effects. In this study, structural response feature of foundation and ground were analyzed according to verticality error of monopile foundation of 5MW offshore wind turbine. Marine environmental load was calculated per ISO standard and the margin of verticality error was calculated to be $L/{\infty}$(=0), L/300, L/200 and L/100. As a result of analysis, it was found that the maximum value of member force of the foundation with L/100 error increased about 7.2% compared to the monopile without verticality error.

• ALGAE
• /
• v.20 no.2
• /
• pp.167-176
• /
• 2005

In order to produce Laminaria japonica in Jeju as feed for abalone, a transplant experiment was performed with the Baekryungdo and the Wando cultivar stocks at the Udo aquafarm from January to July 2003. Eight water conditions at the aquafarm and eleven traits of the two cultivar stocks were measured once a month. The water temperature ranged from 12.9$^{\circ}C$ to 23.5$^{\circ}C$. The salinity was 31.3-36.8‰ the DO was 5.40-9.86 mg ${\cdot}$ $l^{-1}$ the pH was 7.82-9.61. Concentrations of $NO_2-N,\;NO_3-N,\;NH_4-N\;and\;PO_4-P$ were 0.02-0.15 $\mu$M, 2.27-3.49 $\mu$M, 0.16-0.56 $\mu$M and 0.07-0.99 $\mu$M, respectively. The whole frond length of the Baekryungdo and the Wando specimens were 173.84 and 153.67 cm. The blade width, stipe length, blade length, fascia length, blade thickness, total weight and substantiality of the Baekryungdo and the Wando specimens were 14.61 and 13.05 cm, 3.94 and 3.02 cm, 169.88 and 150.65 cm, 155.81 and 137.10 cm, 1.01 and 0.96 cm, 258.04 and 200.96 cm, and 101.56 and 94.62, respectively at the conclusion of the experiment in July. The measurements of the Baekryungdo specimens were slightly higher than those of Wando specimens. The fascia width, stipe thickness and fascia thickness of the Wando specimens were slightly higher than those of the Baekryungdo specimens. The relative growth rates of these traits of two cultivar stocks during the growth test were very similar. Generally, the performance of the Baekryungdo cultivar stock seems to be better than that of the Wando samples. Further study of the physiological ecology for cultivation and breeding is needed in the future.

• Journal of the Korean Society of Visualization
• /
• v.7 no.2
• /
• pp.64-71
• /
• 2010

The flow and noise characteristics of wake behind wind-turbine blades have been investigated experimentally using a two-frame particle image velocimetry (PIV) technique. Experiments were carried out in a POSTECH subsonic large wind-tunnel ($1.8^W{\times}1.5^H{\times}4.3^L\;m^3$) with KBP-750D (3-blade type) wind-turbine model at a freestream velocity of $U_o\;=\;15\;m/s$ and a tip speed ratio $\lambda\;=\;6.14$ (2933 rpm). The wind-turbine blades are connected to an AC servo motor, brake, encoder and torque meter to control the rotational speed and to extract a synchronization signal for PIV measurements. The wake flow was measured at four azimuth angles ($\phi\;=\;0^{\circ}$, $30^{\circ}$, $60^{\circ}$ and $90^{\circ}$) of the wind-turbine blade. The dominant flow structure of the wake is large-scale tip vortices. The turbulent statistics such as turbulent intensity are weakened as the flow goes downstream due to turbulent dissipation. The dominant peak frequency of the noise signal is identical to the rotation frequency of blades. The noise seems to be mainly induced by the tip vortices.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.103-112
• /
• 1986

This study was carried out to prevent the entwining of rice straw on rotary shaft and blade where rice straw was spreaded on paddy field as an organic source before rotary tilling. The rotary tillage was conducted in the paddy field having the soil moisture contents of 30%, 39%, 59% in dry basis and spreaded rice straw (450kg/10a) of 30cm, 45cm, 90cm length with the edged curve angles of rotary blade of $30^{\circ}$, $40^{\circ}$, $50^{\circ}$, $55^{\circ}$ at Yuseung area. And the test were performed on the plot which has width of 30cm and 5cm length and the quantity of entwined rice straw was analized. The test results were summarized as the followings. 1. Entwining phenomenon of rice straw was decreased as the blade edged curve angle increased. The edged curve angle of rotary blade must be determind by considering the characteristics of soil cutting resistance, tilling torque and entwining phenomenon of rice straw. But according to the entwining phenomenon of rice straw only, the edged curve angle of rotary blade should be bigger than $55^{\circ}$ for design. 2. Amount of entwining rice straw was minimized when soil moisture contents was 30 percent (d. b.). It would be better that rotary tillage is performed when soil moisture contents is lower than 30 percent in dry basis. 3. Amount of entwining rice straw was minimized when the length of rice straw was 30cm with $55^{\circ}$ edged curve angle. Therefore, it would be better to chop rice straw as 30cm. 4. Entwining phenomenon of rice straw was decreased as the forward speed decreased. To decrease the entwining rice straw, rotary tillage should be done with forward fist gear (0.35m/s).

• Journal of Species Research
• /
• v.11 no.4
• /
• pp.266-277
• /
• 2022

The current surveys of Ulva in the subtidal area around Jeju Island give a chance to discover unrecorded green algal species of the Korean macroalgal flora. As a result of this investigation, we found Ulva adhaerens Matusmoto & Shimada, inhabiting the subtidal regions, up to 15 m deep, and conducted the DNA barcoding on plastid rbcL-3P and tufA regions with describing the morphological characteristics. Our specimens of U. adhaerens forms a monophyletic clade with the Japanese type specimen and U. piritoka Ngāti Kuri, Heesch & W.A. Nelson from New Zealand exhibiting each 0.3% sequence divergences, respectively, in the plastid rbcL-3P. The genetic variation of U. adhaerens clade is 1.0-3.9% in rbcL-3P and 4.8-9.8% in tufA to each Ulva species, including the generic type, U. lactuca Linneaus. The morphology of Korean U. adhaerens specimens is identical to the type specimens of U. adhaerens from Japan having the development of rhizoidal filaments from both of the cell layers of the distromatic blade and the extension of rhizoidal clumps with adhesive trait between blades by extended rhizoidal clumps at the basal blades. The thallus attachment to substrate is by numerous minute discoidal plates made up of rhizoids originating from the inner part of distromatic blades in basal. Although there are still some problems to resolve the relationship between U. adhaerens and U. piritoka in the rbcL dataset and the phylogenetic pattern of the Group II intron of rbcL, we propose the new record of U. adhaerens in Korean macroalgal flora based on the morphological characteristics of Korean specimens. Continued study of the genus Ulva by morphological and molecular assessment will delimit the species of Ulva, elucidate the relationships between them, and uncover the species diversity.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2021

In this study, a real-sized experimental equipment (pilot plant) was built at the site based on the preliminary research data to develop a movable separator for the mixed construction waste that can be implemented in agricultural areas to review its feasibility through the evaluation of its separation efficiency by waste types. The final construction of the movable separator and experimental results of the separation efficiency are summarized as follows. 1) The separation performance according to the blade type was the best for the combustible wastes either with 26 numbers of L-type blades and 32 numbers of pin type blades. As far as combination of blade types, when the L-type and pin-type were combined, the best separation efficiency was achieved. 2) The separation efficiency for waste wood by the conveyor type and angle of inclination (slope) of the trommel was the best when the conveyor had ribs of seagull shape with the angle of inclination 45°. 3) The separation efficiencies by process showed that 65.9% was separated as inorganic demolition wastes, 18.2% as waste woods, and 16.0% as combustible wastes at conveyor speed of 2-3 rpm, and the error rate was the least from the waste types generated in the dismantle site.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.199-209
• /
• 1997

A one-pass rice whitener with hard metal blades was developed to solve the problems of the existing one-pass rice whitener. The developed one-pass rice whitener was tested and improved through various milling experiments. It showed high performance such as the capacity of 3.5 t/h, the energy consumption of $1.0 kWh/100kg$, milled rice recovery of 91.6%, broken rice rate of 2.2%, the crack rate of 1.9% at the 750 rpm of the roller shaft, compared with those other domestic and foreign one-pass rice whiteners. Especially, it could whiten broun rice of high moisture (16～l7%) with water sprayed at low internal pressure of less than $0.2 kg/cm^2$ and low temperature due to the characteristics of the cutting part composed of 24 hard metal blades. The developed one-pass rice whitener was industrilized and distributed to some rice processing complexs in one fourth price compared with that of imported one-pass rice whiteners.