• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.59-71
• /
• 2016

The Nuclear and Fossil Steam Turbines record a considerable number of failures annually. Some of these failures reported are as result of blade failure. The failure of the L-0 blade in a Steam Turbine is one of the most reported blade failure in Nuclear and Fossil steam turbines. This paper seeks to identify the best Non Destructive Evaluation (NDE) method or methods to be used in the steam turbine L-0 blades inspection process. The development of systems engineering processes presents an opportunity to apply NDE inspection to the L-0 blades. This process apply computer modelling of the L-0 using ANSYS and by simulating the stresses experienced by the L-0 blade during operation it is possible to identify the most susceptible areas for crack formation and growth. The results from these models compared to industry data for validation. The analysis of these results used to predict the most probable failure location and failure modes. Therefore NDE inspection can be applied to these areas with greater degree of accuracy. This would be beneficial in the increasing the accuracy in the detection of cracks and hence save inspection time and the overall inspection cost. Furthermore, not only the location for crack formation and NDE inspection determined but also best the NDE inspection technique/techniques to be applied appropriately on the L-0 blade are prescribed.

• Plant Resources
• /
• v.4 no.1
• /
• pp.53-58
• /
• 2001

The effect of carbenicillin on the dedifferentiation and the regeneration efficiency of plant tissues of horseradish(Armoracia rusticana) was evaluated, Inhibition effect for callus initiation was observed when leaf blade, root and petiole segments were grown on MS medium containing 500 mg/L to 2000 mg/L carbenicillin and 0.5 mg/L 2,4-dichlorophenoxyacetic acid (2,4-D). The regeneration of horseradish shoots from leaf blade, root and petiole explants were decreased as the addition of carbenicillin increased from 1000 mg/L to 2000 mg/L in MS medium containing 0.5 mg/L of 6-benzylaminopurine (BAP) or kinetin. Especially, 500 mg/L carbenicillin treatment significantly inhibited shoot induction when leaf blade explants were grown on hormone-free MS medium. It was suggested that the toxic effects of combinations of carbenicillin and 2,4-D may be due to high auxin activity levels.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.149-154
• /
• 2013

This study was performed to develop a high efficiency submersible axial pump for concentration wastewater treatment. To do this, we simulated the effect of some parameters such as the axial twist angle of a blade(${\beta}$), the radial twist angle of a blade(${\alpha}$) and the length of a blade (l) on pump efficiency using commercial code, ANSYS CFX and BladeGen. The results showed that the axial twist angle of a blade(${\beta}$) was the most sensible parameter on the pump efficiency. And the pump efficiency had a maximum at ${\beta}=20^{\circ}$, ${\alpha}=110^{\circ}$ and l=240 mm.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.4
• /
• pp.245-250
• /
• 1999

Plantlets derived from leaf blade-segment culture of a variegated tobacco (Nicotiana tabacum L. cv. BY-4) that was induced by a heavy-ion ($^{14}N$) beam irradiation to proembryos, were characterized. When explants from both white and green sections of leaves of the variegated plant were cultured on MS medium containing 0.1 mg/L NAA and 1.0 mg/L BAP, the white sections yielded only white shoots, whereas the green sections generated approximately 47.2% green, 37.4% white and 15.4% variegated shoots. In the F1 generation of a green tobacco derived from the leaf blade-segment culture, the segregation ratio of green to white was 1,651:54. Furthermore, reciprocal crosses showed that all of the progenies was green, indicating that the variegation is not maternally inherited. When the signal intensity of photosynthesis genes was determined by DNA gel blot analysis using the variegated leaves derived from green sections of variegated leaves, there were more of the rbcL, psbA, 16S rDNA and 23S rDNA chloroplast genes in the white sections than the chloroplast genes in wild type and green sections of the variegated plants.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.4
• /
• pp.360-365
• /
• 2009

The dietary fiber and crude fiber contents of different thallus regions (blade, stipe, and holdfast) in three brown algae (Laminaria japonica, Ecklonia stolonifera, and E. cava) were detennined at different ages, and then compared with one another. On a dry matter basis, the soluble dietary fiber (SDF) content was highest ($10.8{\pm}0.5%$) in the holdfast of 2-year old L. japonica, and the insoluble dietary fiber (IDF), total dietary fiber (TDF), and crude fiber (CF) contents were highest in the holdfast of 2-year old E. cava at $44.5{\pm}0.7%$, $50.2{\pm}0.5%$, $6.8{\pm}0.7%$, respectively. The IDF, TDF, and CF contents of these three species were measured in the following order: holdfast > stipe > blade, and the SDF contents of L. japonica exhibited the reverse of this trend. The TDF/CF ratio of 1-year old L. japonica, E. stolonifera, and E. cava was greater than was observed in the corresponding 2-year old samples. This is, to the best of our knowledge, the first report demonstrating that the holdfasts of L. japonica, E. stolonifera, and E. cava are rich in dietary fiber contents, especially IDF, TDF, and CF.

• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.1
• /
• pp.54-64
• /
• 2006

To augment weakly damped lag mode stability of a hingeless helicopter rotor blade in hover, piezoelectric shunt with a resistor and an inductor circuits for passive damping has been studied. A shunted piezoceramics bonded to a flexure of rotor blade converts mechanical strain energy to electrical charge energy which is dissipated through the resistor in the R-L series shunt circuit. Because the fundamental lag mode frequency of a soft-in-plane hingeless helicopter rotor blade is generally about 0.7/rev, the design frequency of the blade system with flexure sets to be so. Experimentally, the measured lag mode frequency is 0.7227/rev under the short circuit condition. Therefore the suppression mode of this passive damping vibration absorber is adjusted to 0.7227/rev. As a result of damping enhancement using passive control, the passive damper which consists of a piezoelectric material and shunt circuits has a stabilizing effect on inherently weakly damped lag mode of the rotor blades, at the optimum tuning and resistor condition.

• ALGAE
• /
• v.20 no.2
• /
• pp.151-155
• /
• 2005

To obtain basic data, we investigated the effect of blade length on transplants, the transplanting method of Laminaria japonica for creating L. japonica resources and the number of transplanting plates with surviving L. japonica. The survival rate of L. japonica, blade length of transplants and drag force of transplanting plates were also researched. The number of transplanting plates with surviving L. japonica, the survival rate and blade length of 20 cm long-initial transplants were greater than those of 1.5, 5 and 10 cm long-initial transplants in an outdoor aquarium. At the depth of 4 m in the coastal waters, the number of transplanting plates with surviving transplants, the survival rate and the blade length of 30 cm long-initial transplants were higher than those of 10 and 20 cm longinitial transplants. The drag force is calculated by cording up sporophytes of L. japonica into the transplanting plates under water. The drag force in the case of a 2.18 kg-weight transplanting plate and in a current speed of 0.5 m${\cdot}s^{-1}$ for considering stability of the plate was 631.50 g to a concrete substratum on the seabed, 703.92 g to a shingle substratum, 788.00 g to a sand substratum, and 1018.30 g to a silt substratum. If we consider the stability and economic efficiency of the transplanting plate, the proper weight of the plate per one individual of 18.11 cm in blade width and 190.20 cm in total blade length is regarded as 508.2 g when it is calculated with the concrete substratum that shows the lowest drag force.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.4
• /
• pp.247-252
• /
• 1994

The effects of explant sources, plant growth regulators on callus induction and plantlet differentiation from leaf blade, petiole, and meristem tissue of Pelalgonium citrosa were investigated under illumination or in dark condition Leaf blade explants cultured on Murashige and Skoog's medium containing 2,4-D and kinetin did not form callus or organ. But those cultured on medium with NAA and BA produced callcus and shoots. Dark condition was more effective than light condition to callus induction and showed that some of shoot were differentiated directly from leaf blade explane. Callus proliferated vigorously on meristem tissue after 7 days of culture, and multiple shoots were obtained Sum callus on medium with 0.5 mg/L NAA and BA. Roots formed readily from about 80% of the shoots cultured on medium with 1.0 mg/L NAA. Regenerated plantlets regenerated had phenotypically normal leaves and roots.

• Journal of Plant Biotechnology
• /
• v.1 no.2
• /
• pp.101-107
• /
• 1999

The leaf blade-segments of albino tobacco (Nicotiana tabacum L.) were cultured on MS media containing different concentrations of BAP (0, 0.4, 2.2, 4.4, 22.2 ${\mu}{\textrm}{m}$) with or without NAA (0, 0.5, 2.7 ${\mu}{\textrm}{m}$). Multiple shoots were induced on the media containing 0.4 to 2.2 ${\mu}{\textrm}{m}$ BAP. The best condition for multiple shoot induction with root formation was MS media containing 4.4 ${\mu}{\textrm}{m}$ BAP and 0.5 ${\mu}{\textrm}{m}$ NAA. The regenerated albino plants showed a significant reduction in accumulation of chlorophylls and carotenoids. The drastic reduction of the pigments content was associated with the distinct alterations in gene expression in the albino plants. firstly, the expression of plastid genes, such as rbcL, psbA, 165 rDNA and 235 rDNA, was reduced at the level of transcripts in the regenerated albino plants. Secondly, the alteration of structure of the plastid genes was not detected in the albino plants. However, the copy number of the plastid genes whose transcription level was reduced greatly was increased approximately two-fold, although the transcriptions of nuclear gene (255 rDNA) showed the wild-type level.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.5-15
• /
• 2007

In the recently released accident-investigation report on blade failure, almost 70% of blade failures was found at low pressure turbine blades, and it is well known that main cause is due to the vibration modes. This paper describes the systematic approach on the root cause of the blade failure at L 0 stage, 30MW single flow industrial steam turbine which had tripped by high vibration after ten-month commercial operation. A fracture was found at the only one damping wire hole of 59 blades, and crack was detected at three damping wire holes by NDT. According to the analysis result for the crack fracture surface and the chain of the sequential operational events, we come to the conclusion that a typical high cycle fatigue is the most dominant factor caused to the blade failure, the resonance frequency margin was narrowed by the cut damping wire and the high cycle vibration was amplified, and then the blade was broken at once by the centrifugal force when the crack reached the critical size.