• 제목/요약/키워드: L/C ratio

검색결과 2,345건 처리시간 0.029초

단일형 현장타설말뚝의 소성힌지를 고려한 최적설계법 제안 (Analysis of Plastic Hinge of Pile-Bent Structure with Varying Pile Diameters)

  • 안상용;정상섬;김재영
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.349-356
    • /
    • 2010
  • In this study, a new design method of pile bent structure considering plastic hinge was proposed on the basis of the beam-column model. Based on the analysis results, it is found that the positioning of plastic hinge on the pile bent structure was influenced by nonlinear behavior of material and p-$\Delta$ effect. Moreover, concrete cracking began to occur at the joint section between the pile and column in case of pile bent structure with different cross-sections. The plastic hinge can be developed on the pile bent structure when large displacement was occurred, and pile bent structures can be maintained well only if it is developed on the column part. Therefore, in this study, the optimized cross-section ratio between column and pile was analyzed to induce the plastic hinge at the joint section between the pile and column. Based on this, the optimized diameter ratio of pile and column can be obtained below the inflection point of the bi-linear curve depending on the relations between column-pile diameter ratio($D_c/D_p$) and normalized lateral cracking load ratio($F/F_{Dc=Dp}$). And through this study, it is founded that in-depth limit($L_{As}$=0.4%) normalized by the pile length($L_P$) are proportionally decreased as the pile length($L_P/D_P$) increases up to $L_P/D_P$=17.5, and beyond that in-depth limit converges to a constant value. Finally, it is found that the proposed limit depth by taking into account the minimum concrete-steel ratio would be more economical design of the pile bent structure.

  • PDF

대추 추출물이 첨가된 흑도라지 사과주스의 품질 특성 및 항산화 활성 (Quality characteristics and antioxidant activity of black Doraji-apple juice mixed with jujube extracts)

  • 김자민;문용선;윤경영
    • 한국식품저장유통학회지
    • /
    • 제21권2호
    • /
    • pp.199-205
    • /
    • 2014
  • 본 연구에서는 기능성이 우수한 도라지를 이용하여 흑도라지를 제조하였으며, 흑도라지 추출물, 사과즙, 대추추출물의 혼합비율을 달리하여 흑도라지 사과주스를 제조하고 각각의 품질특성과 기능성을 분석하였다. 흑도라지 사과주스의 pH는 3.90~4.15이었으며, 산도는 1.2에서 1.5 사이를 나타내었다. 당도를 측정한 결과 흑도라지 사과주스 E가 가장 높은 값(9.33 $^{\circ}Brix$)을 나타내었으며, 환원당 함량의 경우 흑도라지 사과주스 E가 85.05 mg/mL로 가장 높은 함량을 나타내었고, 흑도라지 사과주스 B가 41.23 mg/mL로 가장 낮은 함량을 보였다. 당산비 수치의 경우 당도와 환원당 함량이 가장 높은 흑도라지 사과주스 E가 6.98%로 가장 높은 수치를 보였다. 색도는 명도와 황색도는 흑도라지 사과주스 E가 가장 높았으며 적색도는 흑도라지 사과주스 C가 가장 높았다. 관능적 특성을 측정한 결과 향미를 제외한 모든 항목에서 흑도라지 사과주스 C가 가장 우수하게 나타났다. 총 폴리페놀 함량은 흑도라지 사과주스 D가 가장 높은 폴리페놀 함량(706 ${\mu}g/mL$)과 항산화 활성을 보였으나 흑도라지 사과주스 C와 항산화 활성에 유의적인 차이는 없었다. 따라서 흑도라지 사과주스 C가 관능적 특성 및 항산화 활성이 우수하여, 흑도라지 사과주스 제조를 위해 흑도라지 추출물, 사과주스, 대추추출물을 2:4:1의 비율로 혼합하는 것이 가장 바람직 할 것으로 판단된다.

단일 현장타설말뚝의 소성힌지를 고려한 최적설계법 제안 (Proposal of a New Design Method of the Pile-Bent Structure Considering Plastic Hinge)

  • 안상용;장심섬;김재영
    • 한국지반공학회논문집
    • /
    • 제27권2호
    • /
    • pp.91-101
    • /
    • 2011
  • 본 연구에서는 소성힌지를 고려한 단일 현장타설말뚝의 수평거동을 분석하기 위하여 Beam-Column 해석모델을 토대로 단일 현장타설말뚝 기초의 거동특성을 파악하고, 소성힌지를 고려한 최적설계법을 제안하였다. 단일 현장타설말뚝의 소성힌지를 지상부로 유도하기 위한 최적의 기둥-말뚝의 직경비를 분석하기 위해, 변단면 단일 현장타설말뚝의 단면조건에 따른 균열 휨모멘트를 산정하고 지반조건과 수평하중에 따른 말뚝의 거동을 해석하였다. 연구 결과, 최적의 단면 조건은 기둥/말뚝 직경비($D_c/D_p$)와 정규화된 수평균열하중($F/F_{Dc}=D_p$)의 관계를 나타내는 이중직선의 변곡점 이하 부분에서 산정할 수 있었으며, 이로부터 최적의 단면 조건을 제안하였다. 또한 실제 시공사례 분석을 통해, 깊이별 휨모멘트를 바탕으로 최소철근비 적용이 가능한 구간을 분석하였으며, 그 결과 말뚝길이($L_p$)로 정규화된 최소 철근비 적용이 가능한 한계깊이($L_{As=0.4%}$)는 말뚝 직경으로 정규화된 말뚝길이($L_p/D_p$)에 따라 선형적으로 감소하였으며, $L_p/D_p=17.5$ 이후부터는 일정한 값(${\simeq}0.3$)에 수렴함을 알 수 있었다.

304L 스테인리스 강의 플라즈마 질화처리 (Plasma Assisted Nitriding of Stainless Steel Type 304L)

  • 박정렬
    • 열처리공학회지
    • /
    • 제8권4호
    • /
    • pp.255-265
    • /
    • 1995
  • Stainless steel type 304L has been nitrided in the low pressure (600Pa) and high nitrogen (80% $N_2$+20% $H_2$) environment for 5 hours by the square-wave-pulsed-d.c. plasma as a function of temperature $400{\sim}550^{\circ}C$ and pulsation. At the lower temperature range of $400{\sim}500^{\circ}C$ and at the relatively high ratio of pulse duration to pulse period. "S-phase" has been developed in the form of thin nitrided surface layer which has many cracks, leading to be nearly impossible for the industrial anti-wear and anti-corrosion applications. At the higher temperature up to $550^{\circ}C$ with the increasing ratio of the pulse duration to pulse period up to $50{\mu}s/100{\mu}s$, the nitrided layer, whose growth rate has increased also, has been composed mainly of CrN and $Fe_4N$ phases and has become thick, uniform and nearly crack-free.

  • PDF

저온 압력용기용 SA516강의 응력비에 따른 피로크랙 전파특성에 관한 연구 (A Study of Stress ratio on the Fatigue Crack Growth Characteristics of Pressure Vessel SA516 Street at Low Temperature)

  • 박경동;하경준
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2001년도 춘계학술발표대회 개요집
    • /
    • pp.220-223
    • /
    • 2001
  • In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range ΔK$_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range ΔK in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - ΔK in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.e.greatly affect a material with decreasing temperature.

  • PDF

BACC를 이용한 축산폐수의 암모니아성 질소 및 유기물의 제거 II. COD/N비가 질소 및 유기물 제거에 미치는 영향 (Removal of Ammonia Nitrogen and Organics from Piggery Wastewater Using BACC Process-II. Effect of COD/N on Removal of NItrogen and Organics)

  • 성기달;류원률;김인환;조무환
    • KSBB Journal
    • /
    • 제16권2호
    • /
    • pp.140-145
    • /
    • 2001
  • To treat piggery wastewater containing refractory compounds including nitrogen, physical treatments using zeolite and biological processes were investigated. In biogical treatment, the removal efficiencies of organics and nitrogen in bioreador using BACC (Biological Activated Carbon Cartridge) media filled with granule activated carbon were examined. The best removal efficiencies achieved for TKN and COD(sub)cr were 82% and 53% respectively, when zeolite dosage was 300 g/L. Specific nitrogen removal ability was 3.2 mg/g at a zeolite dosage of 50 g/L, whereas specific nitrogen removal ability was 1.8 mg/g at a zeolite dosage of 300 g/L. The increased of C/N ratio resulting from the removal of nitrogen using zeolite led to an increase in removal efficiency of organics. As C/N ratio was increased to 2.0, 2.44 and 6.58 at a HRT of 48 hours in a BACC bioreactor, removal efficiencies of COD(sub)cr were increased to 53.5%, 57.4% and 80.6%. The removal efficiency of wastewater using a zeolite dosage of 399 g/L was increased by 27.1% compared to that of control treatment.

  • PDF

Linolenic acid/linoleic acid 비율이 다른 식이가 연령이 다른 흰쥐의 뇌구조지방 조성과 Acetylcholinesterase 활성에 미치는 영향 (Influence of Dietary Linolenic Acid/linoleic Acid Ratio on Brain Lipid Composition and Acetylcholinestease Activity in Different Aged Rats)

  • 윤군애
    • Journal of Nutrition and Health
    • /
    • 제28권8호
    • /
    • pp.706-716
    • /
    • 1995
  • This study was undertaken to investigate the influence of age and dietary linolenic acid content and the linolenic acid/linoleic acid (LAN/LA) ratio on the brain lipid composition and membrane-bound enzyme, acetylcholinesterase(AchE) activities. AchE was selected as a test case for the relationship between cell lipid composition and cell membrane function. The male rats were fed diets with 0.2, 0.4, 0.6 of LNA/LA ratio within 8% LNA(H-LNA) or 4% LNA(L-LAN) of total fatty acid content for different feeding period(1, 4, 12 month). The fats used s source were sesame oil, perilla oil, soybean oil and beef tallow. The AchE activity of brain crude synaptosomal fraction was reduced with advancing age, showing 20-30% reduction in 12M compared with 1 M, and the P/C ratio was reduced in old rats. In 1 and 4 monthed rats, AchE activites was higher in H-LAN-0.2 and L-LNA-0.2 and 0.4 group. In accordance with rising of AchE activities was higher in H-LNA-0.2 and L-LNA-0.2 and 0.4 group. In accordance with rising of AchE activities, the PC/PE ratio increasedin those groups. Paricularly in L-LNA, the PC/PE ratio increased as the AchE activites for decline of membrane fluidity with increasing cholesterol and decreasing P/C ratio when rats were old. Also, AchE activity increaed with increasing PC/PE ratio which depended on the dietary LNA/LA ratio within each LNA content. Therefore, it is concluded that the lipid composition of cell membrane influenced the AchE activiteis, which was mediated by aging and the modification of dietary LNA/LA ratio.

  • PDF

Effect of Carbohydrates to Protein Ratio in EPS on Sludge Settling Characteristics

  • Shin, Hang-Sik;Kang, Seok-Tae;Nam, Se-Yong
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제5권6호
    • /
    • pp.460-464
    • /
    • 2000
  • Extracellular polymeric substances (EPS) are believed to play a role in the binding and formation of microbial flocs. However, the precise role is not well known. Sludge settling characteristics and the carbohydrate to protein ratio in EPS were tested with various airflow rates in this study. Sludge was collected from three modified sequencing batch reactors (SBRs), which were operated at 16$\^{C}$ with an airflow rate of 0.8L/min, 3L/min and 6L/min, respectively. During the operation, the reactor operated at an airflow rate of 0.8L/min showed sludge volume index (SVI) of 80 to 90ml/g and a constant ratio of carbohydrate to protein in the EPS, while a significant increase in the SVI was seen in the other reactors. Sludge bulking increased the amount of carbohydrate in the EPS, while kept protein almost constant in the airflow rate of 3L/min ad 6L/min. Surface charge also increased with increases in the carbohydrate to protein ratio in the EPS, which weakens the attraction between the EPS and multivalent cations. The ratio of carbohydrate to protein in the EPS was tween the EPS and multivalent cations. The ratio of carbohydrate to protein in the EPS was inferred to be essential for bioflocculation.

  • PDF

전력변환 반도체 냉각용 PFC(FC-72) 밀폐형 2상 열사이폰의 열전달 한계에 관한 연구 (A Study on the Heat Transport Limitations of a PFC(FC-72) Two-Phase Closed Thermosyphon for Cooling Power Semiconductors)

  • 박용주;홍성은;김철주
    • 설비공학논문집
    • /
    • 제14권9호
    • /
    • pp.725-733
    • /
    • 2002
  • In this study, the heat transport limitations of a two-phase closed thermosyphon were investigated. For the test, a two-phase closed thermosyphon ($L_t/: 600 mm,\;L_e:105mm,\;L_a:75mm,\;L_c:420mm,\;D_o:22.2mm,$ container: copper (inner grooved surface), working fluid: PFC ($C_6F_14$) was fabricated with a reservoir that can change the fill charge ratio. The following was imposed as the factors on the heat transport limitations of a two-phase closed thermosyphon. 1) Fill charge ratio of the working fluid. 2) Tilt angle of the longitudinal axis. From tile experimental data, some results were obtained as follows. When the fill charge ratio was relatively small ($\psi$20%), the heat transport limitation occurred about 100W by dry-out limitation. However over 40%, it shelved nearly constant value (500 W) by flooding limitation. The heat transport limitation according to the tilt angle increased smoothly until the tilt angle was $60^{\circ}$,/TEX>, after then decreased slowly.

Methyl-6-deoxy-$\beta$-L-idopyranoside의 합성 (Stereospecific Synthesis of Methyl-6-deoxy-$\beta$-L-idopyranoside)

  • 민신홍;박복구;옥광대
    • 약학회지
    • /
    • 제30권6호
    • /
    • pp.352-355
    • /
    • 1986
  • Methyl-6-deoxy-$\beta$-L-idopyranoside was prepared in good yield by treatment of methyl 2,3,4-tri-O-benzyl-6-deoxy-$\alpha$-D-xylo-hex-5-enopyranoside with H$_2$ on pd, followed by reaction of Na/NH$_3$ at $-50^{\circ}C$. The ratio of L-idopyranoside and D-glucopyranoside was 7 to 1 in 80.7%. It was confirmed that L-idopyranoside was 1C conformation as being expected.

  • PDF