• 제목/요약/키워드: Kv1.3

검색결과 180건 처리시간 0.032초

이격거리가 큰 전극의 공기 절연파괴에 영향을 미치는 인자측정에 관한연구 (A Study on the Measurements of Parameters Affecting the Breakdown Mechanism of a Large Air Spacing)

  • 조연옥;최영욱
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.756-760
    • /
    • 1988
  • The paper presents the measurement results on the parameters affecting the breakdown mechanism of a large air spacing under switching impulse voltages. Measured parameters are the velocities of leader channels, predischarge currents, electric charges injected into the rod-plane air gap and electric field intensities on the plane. For the 3m air gap under switching impulse voltages, the velocities of leader channel have been measured to be of 1cm/${\mu}s$ - 5cm/${\mu}s$, electric field intensity of 2kv/cm, predischarge current of 1.2A - 1.6A, the charges injected into the air gap of 11 - 40 ${\mu}$C for 400-887kV impulse voltages.

  • PDF

이격거리가 큰 전국의 공기절연파괴 현상시 발생하는 인자측정에 관한 연구 (A Study on the Measurements of Discharge Parameters in Case of the Switching Impulse Breakdown of a Large Air Spacing)

  • 최영욱;조연옥
    • 대한전기학회논문지
    • /
    • 제40권12호
    • /
    • pp.1290-1295
    • /
    • 1991
  • The paper presents the measurement results on the parameters affecting the breakdown mechanism of a large air spacing under switching impulse voltages. Measured parameters are the velocities of leader channels, predischarge currents, electric charges injected into the rod-plane air gap and electric field intensities on the plane. For the 3m air gap under switching impulse voltages, the velocities of leader channel have been measured to be of 1cm/x10S0-6Ts - 5cm/x10S0-6Ts, electric field intensity of 2kv/cm, predischarge current of 1.2-1.6A, the charges injected into the air gap of 11-40x10S0-6TC for 400-887kV impulse voltages.

  • PDF

Epoxy-Layered Silicate Nanocomposites Treeing 현상에 관한 연구 (Treeing Phenomena of Epoxy-Layered Silicate Nanocomposites)

  • 박재준;조대령;조항석;김경태;황병준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.371-372
    • /
    • 2008
  • 본 논문은 새롭게 초음파 분산기법을 이용하여 제조된 나노콤포지트 와 원형에폭시 수지에 대한 전기적 특성인 트리현상의 여러특성을 연구하였다. 나노필러인 Layered Silicate Particles가 에폭시수지 중에 Power Ultrasonic으로 분산된 나노콤포지트를 제조하였다. 충진된 혼합물에서 나노입자의 영향을 조사하기위해 열적, 구조적 특성을 연구하였고, 장시간 절연파괴 특성을 조사하기위해 침대평판 전극으로 원형에폭시수지와 나노콤포지트와 비교 측정하였다. 연구는 에폭시원형수지에 대한 인가전압레벌(교류 10, 15, 20kV)의 변화와 온도변화에 대한 (30,90,$130^{\circ}C$)의 트리특성을 연구하였다. 모든 전압레벨에서는 일정전압까지 1kV/s 로 승압 후 일정하게 인가되었고, 파괴에 이를 때까지 측정한 결과 10kV, 15Kv, 20KV의 경우 1042,75,488분후에 파괴에 이르렀다. 그러나 트리진행속도는 인가전압이 높을수록 빠르게 진행하였다. 온도 변화에 대한 트리특성으로서 15kV인가 후 파괴에 이르는 시간은 30,90,$130^{\circ}C$의 경우 75.3, 970, 226분으로 $90^{\circ}C$의 경우 절연성능이 가장 우수하였고, 트리진전속도는 $30^{\circ}C,130^{\circ}C,90^{\circ}C$ 순으로 나타났다. 이는 트리진전으로 파괴에 이르는 시간과 속도는 트리형태에 지배적으로 영향을 맡고 있음을 알 수 있었다. 또한 나노콤포지트 트리의 경우 15kV인가시 10902에 파괴에 이르렀고, 트리진전속도는 0.000729mm/min으로 원형에 비하여 53.36배의 트리진전시간이 느리고, 파괴시간은 145배 오래 견디는 절연내력을 측정할 수 있었다.

  • PDF

Growth and characterization of $Al_{2}O_{3}-based\;Y_{3}Al_5O_{12},\;ZrO_{2}$ binary and ternary eutectic fibers

  • Lee, J.H.;Yoshikawa, A.;Kaiden, H.;Fukuda, T.;Yoon, D.H.;Waku, Y.
    • 한국결정성장학회지
    • /
    • 제11권4호
    • /
    • pp.170-175
    • /
    • 2001
  • It was possible to grow the $Al_{2}O_{3}$ based $Y_{3}A_{5}O_{12}(YAG),ZrO_{2}$ binary and ternary eutectic fibers using micro-pulling down method with a growing rate of 0.1~15 mm/min. While $Al_{2}O_{3}/ZrO_{2}$ showed cellular-lamellar structure, $Al_{2}O_{3}$/YAG and $Al_{2}O_{3}$/YAG/$ZrO_{2}$ternary eutectic fibers showed homogeneous Chinese script lamellar structures. The microstructures of $Al_{2}O_{3}/ZrO_{2}$ binary eutectic fibers changed with solidification rate from lamellar pattern to cellular structure. The interlamellar spacing agreed with the inverse-square-root dependance on pulling rate according to $\lambda$=$kv_p\;{-1/2}$. $Al_{2}O_{3}/ZrO_{2}$ binary eutectic fibers recorded the highest tensile strength of about 1560MPa at room temperature. $Al_2O_3/YAG/ZrO_2$ternary eutectic fiber showed excellent thermal stability to $1200^{\circ}C$ without significant decrease. The maximum strength of ternary eutectic fibers recorded were 1100MPa at $25^{\circ}C$ and 970MPa at $1200^{\circ}C$, respectively.

  • PDF

Dielectric Properties of Polymer-ceramic Composites for Embedded Capacitors

  • Yoon, Jung-Rag;Han, Jeong-Woo;Lee, Kyung-Min
    • Transactions on Electrical and Electronic Materials
    • /
    • 제10권4호
    • /
    • pp.116-120
    • /
    • 2009
  • Ceramic-polymer composites have been investigated for their suitability as embedded capacitor materials because they combine the processing ability of polymers with the desired dielectric properties of ceramics. This paper discusses the dielectric properties of the ceramic ($BaTiO_3$)-polymer (Epoxy) composition as a function of ceramic particle size at a ceramic loading of 40 vol%. The dielectric constant of these ceramic-polymer composites increases as the powder size decreases. Results show that ceramic-polymer composites have a high dielectric constant associated with the $BaTiO_3$ powder with a 200 nm particle size, high insulation resistance, high breakdown voltage (> 22 KV/mm), and low dielectric loss (0.018-0.024) at 1 MHz.

월성원전 4호기 전 출력 운전시 소외전원상실시험 실패 원인분석 (Failure Cause Analysis for Loss of Off-site Power Test during Normal Full Power Operation On Wolsong-4 NPP)

  • 장태휘
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 A
    • /
    • pp.175-181
    • /
    • 2000
  • 월성원자력4호기가 '99.06.09일 11:53분 경 전출력 소외전원상실시험시 주발전기 병입차단기 및 기동용변압기 차단기의 트립과 동시에 예상 밖의 13.8Kv 원자로 냉각재펌프모터#3(9.000HP)이 순시과전류 보호계전기(50Y) 동작으로 트립되어 이로 인한 냉각재 저유량으로 원자로 제1정지계통이 동작되고 원자로가 비상정지 되어 동 시험이 실패되었음. 이 비정상적인 고장은 예비디젤발전기의 수동 기동 병입과 터빈 수동 정지 및 주발전기 트립후 적절한 조치로 소내전원은 정상적으로 복구되었음. 이에 대해 냉각재펌프모터#3의 순시과전류 동작 원인을 유도전동기의 전원상실 후 발생되는 잔류전압(Residual Voltage)과 공급 모선전압(Bus Voltage) 측면에서 분석하며, 모터의 회전속도, 위상각, 잔류전압크기 변화 및 신속개방 절체시 냉각재펌프모터의 돌입 기동전류를 계산하고, PSS/E 프로그램을 사용한 간략한 모의 사례로 검증하였으며 이에 대한 재발방지를 위한 대책을 제시함.

  • PDF

포항 방사광 가속기의 고주파시스템 설계

  • 김영수
    • 전기의세계
    • /
    • 제38권5호
    • /
    • pp.43-50
    • /
    • 1989
  • 현재까지 진행된 저장링 격자의 기본설계에 따라, 고주파 시스템 특히 Cavity와 고전력 고주파시스템의 기본 요구사항 및 기본구조를 보여주었다. 이외에도 저장링의 고주파시스템은 아주 잘 설계된 정밀 고주파회로의 둣받침을 받아야 하는데 이에 대한 설계는 아직 초기단계에 있다. 안정된 500MHz 전원에서부터, Cavity내부 및 외부, 또 Klystron의 출력 등등의 상태를 파악하는 amplitude 및 phase detector들 또한 phase shifter, 신호감쇄기, 튜너 등이 많은 feedback 회로를 통해 서로 연결되어 각종 고, 저전력 시스템을 control하고 Cavity간의 위상을 맞추어 주어야 한다. 또한 이모든 system은 computer control 및 manual control이 가능해야 하고, 고압(-50KV), 고전류(-15A)가 사용되고 또한 Cavity 자체가 전체 저장링의 진공 시스템을 파괴할 수도 있으므로 이에 대한 초고속의 안전 relay 시스템도 설치되어야 한다. 충분한 빔의 수명을 위한 최대전얍은 1.5MV 내지 2.3MV로서 3개 또는 4개의 Cavity가 필요하고, 필요전력은 최소 171KW에서 최대 512KW까지임을 보여주었다. 여러가지 가능한 layout에서 PLS에 적합한 구조를 선택하였으며 기존 가속기들에 사용된 기술수준을 능가하는 특별한 요구사항은 없음을 보여주었다.

  • PDF

Properties of $Sr_{0.8}Bi_{2.3}{(Ta_{1-x}Nb_{x})}_{2}O_{9+{\alpha}}$ Thin Films

  • Park, Sang-Jun;Jang, Gun-Eik
    • Transactions on Electrical and Electronic Materials
    • /
    • 제1권1호
    • /
    • pp.22-25
    • /
    • 2000
  • Polycrystalline SBTN layered ferroelectric thin film with various Nb mole ratios were prepared by sol-gel method Pt/ $SiO_2$/Si (100) substrates. The films were annealed at different temperature and characterized in terms of phase and microstructure. The films were crystallized with a high (105) diffraction intensity and had rodike structure, SBTN films fired at 800$^{circ}C$ revealed standard hysteresis loops with no fatigue for up to 10$^{10}$ cycles. At an applied voltage of 5V the dielectric constant($varepsilon$) , dissipation factor (tan $delta$), remanent polarization(ZPr) and coercive field(Ec) of typical S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$) $O_{9+}$$alpha$/ thin film(x=0.1) prepared on Pt/ $SiO_2$/Si (100) were about 277.7, 0.042, 3.74$mu$C/$textrm{cm}^2$, and 24.8kv/cm respectively.ly.y. respectively.ly.y.y..

  • PDF

무연 $Bi(Na,K)TiO_3$계 세라믹을 이용한 압력센서의 전기적 특성 (Electrical Properties of pressure sensor using a Pb-free $Bi(Na,K)TiO_3-SrTiO_3$ Ceramics)

  • 이현석;류주현;정영호;홍재일;정광현;류성림
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
    • /
    • pp.387-391
    • /
    • 2004
  • [ $(Bi_{1/2}Na_{1/2})TiO_3$ ](BNT) is considered to be an excellent candidate for the key material of lead-free piezoelectric ceramic due to properties of strong ferroelectricity with a relatively large remanent polarization $Pr=38{\mu}C/cm^2$, and a large coercive field, Ec=73KV/cm. In this study, electrical properties of pressure sensor using a $0.96Bi_{0.5}(Na_{0.84}K_{0.16})_{0.5}TiO_3+0.04SrTiO_3+0.2wt%La_2O_3$ ceramics are investigated. Resonant frequency of pressure sensor was decreased with increasing pressure. However, its anti-resonant frequency was increased with increasing pressure.

  • PDF

세 종류 줄기세포의 특성 분석과 지방유래 줄기세포의 심근세포로의 분화 (Characterization Analysis for Cardiogenic Potential of Three Human Adult Stem Cells)

  • 박세아;강현미;김은수;김진영;김해권
    • 한국발생생물학회지:발생과생식
    • /
    • 제11권3호
    • /
    • pp.167-177
    • /
    • 2007
  • 본 연구에서는 사람의 지방조직(human adipose tissue-derived stem cells, HAD), 탯줄(human umbilical cordderived stem cells, HUC), 그리고 양막(human amnion-derived stem cells, HAM)유래 줄기세포를 분리하여 세포의 형태 및 성장속도를 비교하고, 역전사 중합효소 연쇄반응과 면역세포화학 염색법을 이용하여 유전자와 단백질 발현을 비교 분석하였다. 또한 지방유래 줄기세포를 이용하여 심장근육세포로의 분화를 유도하였다. 본 연구 결과, 탯줄과 양막유래 줄기세포의 형태는 매우 유사하였으며, 지방유래 줄기세포의 형태는 다른 것으로 나타났다. 분열시간은 탯줄유래 줄기세포가 가장 빨랐으나 총 분열 횟수는 양막유래 줄기세포와 같았으며, 지방유래 줄기세포의 총 분열횟수가 가장 많았다. 세 종류 줄기세포의 유전자와 단백질 발현은 비슷한 양상을 나타냈다. 지방세포, 골세포, 연골세포로의 분화 유도 결과 세 종류의 줄기세포 모두 분화 유도되었다. 또한, 심장세포 특이 유전자의 발현 분석 결과 세 종류의 줄기세포에서 유사한 발현 양상을 나타냈다. 이 중 지방유래 줄기세포를 24시간 동안 $10\;{\mu}M$ 5-azacytidine 처리 후 기본 배양액에서 4주 동안 배양하거나 또는 5-azacytidine 처리 후 bone morphogenic protein-2(BMP-2)와 fibroblast growth factor-10(FGF-10) 또는 BMP-4와 FGF-4 또는 BMP-4와 FGF-8이 첨가된 배양액으로 4주 동안 배양하여 심근세포로의 분화를 유도하였다. 분화 유도 후 심장세포 특이 유전자 발현을 분석 결과 cardiac myosin light chain-1(Cmlc-1)과 L-type calcium channel ${\alpha}1C$ subunit(${\alpha}1C$) 유전자의 발현이 증가하였다. 그러나 troponin T(TnT), troponin I(TnI) 그리고 potassium channel Kv4.3 subunit (Kv4.3) 유전자의 발현은 증가하지 않았다. 본 연구 결과, 지방, 탯줄 및 양막유래 줄기세포는 특성이 매우 유사한 것으로 나타났으며, 심장 질환 치료를 목적으로 하는 세포 치료에 이용될 수 있을 것으로 사료된다. 또한, 적절한 배양조건 하에서 성장인자와 cytokine들을 처리하여 심장세포로의 분화 유도가 이루어진다면 임상적용에 유용한 세포로 사용될 수 있을 것으로 사료된다.

  • PDF