• 제목/요약/키워드: Korean-PEQ

검색결과 4건 처리시간 0.021초

절단장애인을 위한 한국어 의지평가 설문지의 신뢰도 (The Reliability of the K-PEQ(Korean Prosthesis Evaluation Questionnaire) in Lower Extremity Amputees)

  • 성우성;김장환;정동훈
    • 디지털콘텐츠학회 논문지
    • /
    • 제19권7호
    • /
    • pp.1405-1412
    • /
    • 2018
  • 한국어 의지평가 설문지를 개발하고 그 타당도가 연구되었으나, 다리 절단장애인을 대상으로 의지평가 설문지를 적용하여 신뢰도를 평가한 연구는 실시되지 않았다. 본 연구에서는 다리 절단장애인을 대상으로 개발된 한국어-PEQ를 적용하여 그에 대한 신뢰도를 평가하였다. 그 결과, 한국어-PEQ의 모든 항목에서 천장효과와 바닥효과가 15%이하로 나타나 응답의 난이도가 적절한 것으로 나타났다. 한국어-PEQ 영역별 신뢰도(inter-rater reliability)의 급간내 상관계수(intra-class coefficient, ICC)는 .719(95%CI .600~.811)~.920(95%CI .890~.945)로 나타났고, 영역간 신뢰도는 .958로 높게 나타났다. 문항 내적 일치도 Cronbach's ${\alpha}$값은 .910으로 높게 나타나 한국어-PEQ는 높은 신뢰도가 있음을 알 수 있었다.

Test-particle Solutions for Electron Acceleration in Low Mach Number Shocks

  • Kang, Hyesung
    • 천문학회보
    • /
    • 제45권1호
    • /
    • pp.52.1-52.1
    • /
    • 2020
  • We propose semi-analytic models for the electron momentum distribution in weak shocks that accounts for both in situ acceleration and reacceleration through diffusive shock acceleration (DSA). In the former case, a small fraction of incoming electrons is assumed to be reflected at the shock ramp and pre-accelerated to the so-called injection momentum, pinj, above which particles can diffuse across the shock transition and participate in the DSA process. This leads to the DSA power-law distribution extending from the smallest momentum of reflected electrons, pref, all the way to the cutoff momentum, peq, constrained by radiative cooling. In the latter case, fossil electrons, specified by a power-law spectrum with a cutoff, are assumed to be re-accelerated from pref up to peq via DSA. We show that, in the in situ acceleration model, the amplitude of radio synchrotron emission depends strongly on the shock Mach number, whereas it varies rather weakly in the re-acceleration model.

  • PDF

전기저항 측정법을 이용한 Pd박막의 수소화 특성 측정 (Measurement of Hydrogenation Characteristics of Pd Film by Using Electrical Resistivity Measurement Technique)

  • 조영신;이호재;이종숙
    • 한국수소및신에너지학회논문집
    • /
    • 제7권2호
    • /
    • pp.173-180
    • /
    • 1996
  • 4-probe resistivity measurement technique was used to study kinetics of hydrogen absorption-desorption on Pd film($520{\AA}$ thick) at room temperature upto 1 bar. Kinetics data are fitted well to 1st order kinetics equation in ${\alpha}$ and ${\alpha}^{\prime}$ phases. In ${\alpha}+{\alpha}^{\prime}$ phase, absorption kinetics was very complicated, but it could be explained partially with nucleation and growth process. Ln(dR/dt) vs. time plot gives rate constant k value(R is resistance of sample, t is time). k value for absorption is $4^{-6}{\times}10^{-4}/sec$ in ${\alpha}$ phase. k is increasing upto $4^{\times}10^{-2}/sec$ as hydrogen pressure increasing in ${\alpha}^{\prime}$ phase. k is proportional to ln(Pop/Peq), where Peq is equilibrium plateau pressure and Pop is the opposing pressure. In contrast to bulk sample k value was decreasing with increasing number of A-D cycling in ${\alpha}^{\prime}$ phase absorption.

  • PDF

아스팔트 도로포장 작업자의 아스팔트 흄 및 다환방향족탄화수소 노출수준 평가 (Asphalt Fumes and Polycyclic Aromatic Hydrocarbons(PAHs) Exposure Assessment among Asphalt Road Paving Workers)

  • 박현희;황은송;김성호
    • 한국산업보건학회지
    • /
    • 제28권3호
    • /
    • pp.257-266
    • /
    • 2018
  • Objectives: The objective of this study was to evaluate asphalt fumes and PAHs exposure among asphalt road paving workers. Methods: Task-based personal air samplings(n=41) were carried out in 3 asphalt road paving construction sites using PTFE (polytetrafluorethylene) filters for asphalt fume and XAD-2 with glass fiber filters for PAHs. The concentration of fumes and PAHs were showed by four different job(paver finisher operator, paving laborer(raker), macadam roller operator and tire roller operator). Results: The geometric mean(GM) concentration of asphalt fumes as benzene soluble aerosol was highest at paving laborers($42.32{\mu}g/m^3$), followed by in order, paver finisher operators($41.57{\mu}g/m^3$), macadam roller operators($31.9{\mu}g/m^3$), and tire roller operators($30.31{\mu}g/m^3$). The GM of total PAHs concentration was highest at paver finisher operators($37.5{\mu}g/m^3$), followed by in order, paving laborers($20.13{\mu}g/m^3$), tire roller operators($8.66{\mu}g/m^3$), and macadam roller operators($6.23{\mu}g/m^3$). The results of the evaluation of 16 compounds of PAHs showed that the concentrations of naphthalene, achenaphthylene, achenaphthene, pyrene, fluorene and benz (a) anthracene was higher than those of other PAHs compounds and as the carcinogenic substances, benzo(a)pyrene, and debenz(a,h) anthracene were detected. The benzo(a)pyrene equivalent concentration(BaPeq) was $2.81{\mu}g/m^3$ at paver finisher operators, $2.07{\mu}g/m^3$ at paving laborers, $0.41{\mu}g/m^3$ at tire roller operators and $0.22{\mu}g/m^3$ at macadam roller operators. Asphalt road paving workers have higher benzo(a)pyrene equivalent(BaPeq) values even though at lower total PAHs concentration than workers in steel pipe coating and tar industry. Conclusions: Asphalt road paving workers were found to have risk of carcinogen exposure due to higher Benzo(a)pyrene equivalent concentration(BaPeq) than other PAHs exposure occupations. This study confirmed the carcinogenic hazards among asphalt paving workers.