• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.43-51
• /
• 2017

Purpose: The purpose of this study is to evaluate the dosimetric effects of couch attenuation and air gaps using 3D phantom for prone breast radiation therapy. Materials and method: A 3D printer(Builder Extreme 1000) and computed tomography (CT) images of a breast cancer patient were used to manufacture the customized breast phantom. Eclipse External Beam Planning 13.6 (Varian Medical Systems Palo Alto, CA, USA) was used to create the treatment plan with a dose of 200 cGy per fraction with 6 MV energy. The Optically Stimulated Luminescence Detector(OSLD) was used to measure the skin dose at four points (Med 1, Med 2, Lat 1, Lat 2) on the 3D phantom and ion-chamber (FC65-G) were used to perform the in-vivo dosimetry at the two points (Anterior, Posterior). The Skin dose and in-vivo dosimetry were measured with reference air gap (3 cm) and increased air gaps (1, 2, 3, 4, 5, 6 cm) from reference distance between the couch and 3D phantom. Results: As a result, measurement for the skin dose at lateral point showed a similar value within ${\pm}4%$ compared to the plan. While the air gap increased, skin dose at medial 1 was reduced. And it was also reduced over 7 % when the air gap was more than 3 cm compared to radiation therapy plan. At medial 2 it was reduced over 4 % as well. The changes of dose from variety of the air gap showed similar value within ${\pm}1%$ at posterior. As the air gap was increased, the dose at anterior was also increased and it was increased by 1 % from the air gap distance more than 3 cm. Conclusion: Dosimetrical measurement using 3D phantom is very useful to evaluate the dosimetric effects of couch attenuation and air gaps for prone breast radiation therapy. And it is possible to reduce the skin dose and increase the accuracy of the radiation dose delivery by appling the optimized air gap.

• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.939-961
• /
• 2016

For effective conservation of endangered wild plants, it is necessary to understand their interactions with environmental factors in each habitat together with life traits of target species. First, the characteristics of their distribution were investigated followed by their monitoring for 4 years focusing on the habitats in the lagoon. Also, their life traits were compared including production of hibernacles, fruits, and seeds by the soil fertilization and light intensities. Next, the information on the species was secured by germination experiment using the generated seeds from the cultivation experiment. The habitat of Glaux maritima var. obtusifolia Fernald in Korea was located in the rear edge of the worldwide distribution and its four habitats were isolated and distributed far away each other. Two of them were located in small salt-marsh and fine sand estuaries formed in the rocky area of the seashore, and the other two were inhabited with the sandy soil in the lagoon which was connected by river-mouth to the sea. Glaux maritima var. obtusifolia Fernald tends to be distributed in the sites where the establishment and growth of the competitor were inhibited by salinity, periodic flooding, and lower layer of the soil to extend a roots. It maintained its population by recruitments of hibernacles and seedling. The production of hibernacle was assumed to be affected by the particle consist of the sand together with organic matters in the soil. Seedling recruitment was observed only in the salt-marsh area located in the rear sites of sand ridge where was the shore of the lagoon. Glaux maritima var. obtusifolia Fernald was observed to have different threatening factors by each population. Its population in Pohang seemed the sedimentation of fine sand which affected the recruitment of hibernacles had been eroded due to the construction of the coastal road. The population in Ulsan appeared rapid expansion of competitor and reduction of its distribution area due to the interruption of eluted water supplied to the habitat. On the other hand, the habitat in the lagoon maintained the population relatively stable. Especially, the population in Songji-ho was determined to be the most stable one. To sustain the population of Glaux maritima var. obtusifolia Fernald distributed in the lagoon, it is suggested that the wide ranged scale of conservational activities is necessary to maintain the mechanisms including the entrance of seawater which belongs to the lagoon, and periodic flooding.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.8
• /
• pp.971-978
• /
• 2017

Danggui leaf (Angelica acutiloba Kitagawa) has numerous dietary fiber and healthy functional properties such as anti-inflammatory activity. However, it is usually discarded after its roots are harvested. For wide application of danggui leaf, squeezed danggui leaf juice was used for making pan bread. Treatments included imported wheat flour (IMWF) and domestic wheat flour (DOWF) as a control, 1% soluble solid contents of squeezed danggui leaf juice instead of wheat flour (1% SDLJ), 2% SDLJ, 3% SDLJ, and 4% SDLJ. In the fermentation expansion, dough volume was not significantly different between DOWF and 1% SDLJ, whereas it decreased according to increased amount of squeezed danggui leaf juice. Regarding physical properties, springiness and cohesiveness decreased according to increased amount of squeezed danggui leaf juice and longer storage period. Gumminess, brittleness, and hardness increased according to increased amount of squeezed danggui leaf juice, although these were not statistically different among IMWF, DOWF, and 1% SDLJ after making pan bread. Principal component analysis (PCA) was performed to assess the correlation between storage period and physical properties. In the PCA, variance proportion of principal component (PC) 1 was 0.87 while that of PC 2 was 0.10. Further, 1% SDLJ showed similar results as DOWF and INWF after making pan bread and after 3 days of storage. In conclusion, use of 1% SDLJ is desirable for making squeezed danggui leaf juice.

• Korean Journal of Plant Taxonomy
• /
• v.46 no.2
• /
• pp.199-212
• /
• 2016

A comparative study of leaf epidermal microstructures in the tribe Sorbarieae (Adenostoma: 3 spp., Chamaebatiaria: 1 sp., Sorbaria: 11 spp., Spiraeanthus: 1 sp.) including related genera Gillenia (2 spp.) and Lyonothamnus (2 spp.) was carried out using scanning electron microscopy (SEM) in order to evaluate their significance in taxonomy. The leaves of Adenostoma, Chamaebatiaria, and Spiraeanthus were amphistomatic, whereas Gillenia, Lyonothamnus, and Sorbaria were hypostomatic. The size range of the guard cells is $7.84-48.7{\times}5.86-38.6{\mu}m$; the smallest one was found in Sorbaria tomentosa var. tomentosa ($7.84-11.8{\times}6.84-10.5{\mu}m$), while the largest measured example was Adenostoma fasciculatum var. obtusifolium ($30.3-48.7{\times}18.8-38.6{\mu}m$). Anomocytic stomata complex were the most frequent type (rarely cyclocytic), with usually both anomocytic and actinocytic types occurring in one leaf. On the surfaces, both the adaxial and abaxial anticlinal walls of the subsidiary cells vary (e.g., straight/curved, undulate, sinuate). Four types (unicellular non-glandular trichome, stellate, glandular trichome, pustular glandular trichome) of trichomes are found in the leaves. The epicuticular wax can be divided two types: membraneous platelets (Lyonothamnus) and platelets (Sorbaria arborea var. arborea, S. arborea var. subtomentosa, S. kirilowii, S. tomentosa var. tomentosa, Spiraeanthus schrenkianus). The trichome diversity (in particular, stellate, gland) and the existence of epicuticular wax may have taxonomic significance, although the leaf epidermal micromorphological characteristics do not provide synapomorphy in this tribe. These leaf micromorphological features are most likely better understood in the Sorbarieae when used in conjunction with external morphological characters.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.511-520
• /
• 2014

Kenaf (Hibiscus cannabinus L.) was recognized as a potential source of forage. To reduce the production cost, we should insure large cultivation area. The one of the best candidate places to expand the useful kenaf production was 'Saemangeum' reclaimed land. To confirm the possibility of kenaf growth in reclaimed land, we seeding and cultivated the kenaf in 'Saemangeum'. The germination percentage of kenaf on 5.0 dS/m soil salinity was 18%. It is less 66% than that of 4.0 dS/m soil salinity and at 6.0 dS/m, the germination percentage of kenaf was under 10%. The growth and development of kenaf in reclaimed land grew worse with increasing soil salinity. The stem diameter which the most important factor that decide the value and yield of product was upper 2.6 cm when soil salinity maintained under 4.0 dS/m, but if soil salinity marked over 4.0 dS/m, the stem diameter of kenaf was drop under 2.0 cm and it deteriorate the number of leaves per plant by 20~46%. The necrosis on older tip and marginal leaves were noted approximately first month after seeding which was correlated directly with the salinity levels of reclaimed soil. Reduction of total yield was coincide with increasing levels of EC. If soil salinity over 5.0 dS/m, the amount of decreased by soil salinity was 51% than that of non-reclaimed region. The allowable soil salinity level of which could be maintained within 20% reduction rate was 4.2 dS/m. Consequently kenaf can be grown successfully with moderately saline soil condition. However, salt levels in excess of 4.2 dS/m severely have restricted plant growth and development and will result in significant yield reduction.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.22-30
• /
• 1999

This experiment was carried out to determine the forage yield and mineral contents of silage corn(Zea mays L.), and N balance, soil chemical characteristics and nitrate-N level in infiltration water by different types and N rates of liquid manure applied. Seven treatments consisting of chemical fertilizer $200kg\;N;ha^{-1}$, liquid cattle manure 200, 320 and $440kg\;N;ha^{-1}$, liquid swine manure 200, 320 and $440kg\;N;ha^{-1}$ were arranged in a randomized complete block design with three replications. The results obtained at National Livestock Research Institute, RDA, in Suweon from May 1997 to Aug. 1997 are summarized as follows : There were no significant differences in percentage of dry matter among the treatments, but significant dry matter yield differences were found (P<0.05), and also the mean dry matter yield of liquid swine manure plot was higher than that of liquid cattle manure plot. Potassium, calcium and magnesium contents of silage corn increased with increasing liquid manure application rates (P<0.05). Nitrate-N content of silage corn in the liquid cattle manure treatments was not influenced by liquid manure application rates, but that in the liquid swine manure treatments increased with increasing the N rates of liquid manure application. pH and contents of exchangeable canons of the soil after experiment were raised by increasing the amount of liquid manure application. Available $P_2O_5$ content in topsoil(0-10cm) was highest as $340mg\;kg^{-1}$ at the plot of liquid swine manure $440kg\;N;ha^{-1}$. Concentration of nitrate-N in infiltration water increased at the plot of liquid swine manure $440kg\;N;ha^{-1}$. Amount of nitrogen balance increased with increasing liquid manure application rates. Based on the results of this experiment, it is suggested that the mean dry matter yield of liquid swine manure plot was higher than that of liquid cattle manure plot, and the amount of nitrogen balance increased with increasing liquid manure application.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.2
• /
• pp.89-96
• /
• 1975

The experiment was carried out to investigate the chemical properties of cement kiln dusts, abundantly produced from cement industry as a byproduct, and their effectiveness on rice yield. The field experiment was conducted on the acid paddy soil developed on basalt at Dongsong-Myon, Chulwon-Kun, Gangwon-Do. Two kinds of cement kiln dusts were used ; By Pass (BP) collected from the suspension preheater and Electric Precipitate (EP) from the cottrell electric precipitator. The levels of cement kiln dust applied were 100kg/10a, 200kg/10a and 300kg/10a, and the recommended variety "Nong Back" was adopted for this experiment. The results obtained are summarized as follows ; 1. The component of cement kiln dusts seems to be quite suitable for liming material. BP has 55% alkalinity, 41.7% of soluble calcium, 9.8% of soluble magnesium and 4.5% of water soluble silicate, while EP has 53.5% alkalinity, 41.7% soluble calcium, 8.3% soluble magnesium and 1% water soluble silicate. 2. The relative effectiveness of cement kiln dust in the soil will be superior due to very fine particle size. EP pass through completely 270 mesh screen, and 95% of BP pass through 150 mesh screen, 68% passing 270 mesh. 3. BP application at the rate of 100kg/10a increased 21% of rice yield as compared with control and EP 15%. It was observed that the affected yield components were increased panicle number per hill, grain number per panicle and 1,000 grains weight. 4. The application of optimum amount (100kg/10a) of cement kiln dusts accelerated the uptake of nutrients by rice plant and increased rice yield. However, the excess amounts (200kg/10a, 300kg/10a) of cement kiln dusts retarded the uptake of nutrients from soil.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.365-373
• /
• 2016

Composites are the most useful restorative material. However, composites have some disadvantages such as polymerization shrinkage, long working time, and susceptibility to water and contamination, which are stood out more especially when treating children. To solve these problems, bulk-fill composites have been developed. The aim of this study is to compare mechanical properties of bulk-fill and conventional composites. Bulk-fill composites (SureFil SDR flow (SDR), Tetric N-Ceram bulk fill (TBF)) and conventional composites (Filtek Z-350 (Z-350), Unifil Flow (UF), Unifil Loflo Plus (UL)) were used. The Vickers hardness tester was used to measure the microhardness of materials, and Fourier transform infrared spectroscopy was used to measure the degree of conversion. Polymerization shrinkage was measured by using a linometer. Flexural and compressive properties were measured by using the universal testing machine. Data were statistically analyzed by ANOVA and Scheffe's post hoc test. The level of significance was set to p < 0.05. Most conventional composites showed higher microhardness than bulk-fill composites. However, bulk-fill composites showed a higher top/bottom microhardness ratio than conventional composites. Bulk-fill composites showed a higher top/bottom degree of conversion ratio than conventional composites. The polymerization shrinkage was highest in UL and lowest in Z-350. The polymerization shrinkage of flowable composites was higher than that of non flowable composites. The compressive properties were highest in Z-350 and lowest in SDR and UL. In terms of flexural properties, Z-350 was the highest. However, none of the bulk-fill composites exhibited mechanical properties as good as those of conventional composites. Nonetheless, the ratio of microhardness and degree of conversion, which are important properties of bulk filling, were higher in bulk-fill composites. Therefore, the bulk-fill composites might be considered suitable restorative materials in pediatric dentistry.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.318-332
• /
• 2015

The maize production in South-eastern Asian countries showed a continuous increase with increasing poultry-livestock from the beginning of the 1990s to early 2010. Also the need for a new variety development of each contries was increased rapidly in the same period. Single-Cross hybrid varieties have been developed and supplied from 2001 instead of multi-cross maize varieties since 1992 in Indonesia. In Cambodia, CP group is mainly manufacturing feeds with most of the forage maize from farmers who are growing its seeds from the company. Cambodian main cultivars are varieties of multinational corporations such as DK8868 from Monsanto, NK6326, NK7328 from Syngenta and CP333 from CP group including local business company. Vietnam is the main maze importing country in South-Eastern Asia which had imported 13 times scale of amount compared to exports in average from 1990 to 2011. Vietnamese government has developed a range of varieties for improving their efficiency in production, such as the LVN-10 with political investments. Their production has been reached to 80% of the total. According to the 2012 MIFAFF (Ministry for Food, Agriculture, Forestry and Fisheries) data in Korea, domestic edible maize cultivation area was approximately 15,000ha. It showed 74,399 tons of production, 3.8% of food self-sufficiency in maize and around 0.9% of grain self-sufficiency rate. The consumption of grain is mostly rely on imports in Korea. To overcome the limit of the domestic seed market and increase maize self-sufficiency, the need to develop maze varieties for world-class is increasing at present through analyzing the market trend and prospect of the seed industry in South-eastern Asia.

• Korean Journal of Environment and Ecology
• /
• v.30 no.3
• /
• pp.291-307
• /
• 2016

Evaluation of the extinction risk of endangered plants at international, national as well as at regional levels is essential to the implementation of plans for direct conservation activities. Reports indicate that 34 endangered plants are distributed in the middle eastern area of Korea. For each endangered plant, we investigated the sites, area of extents, population size, and factors that affect population extinction. We assessed risk factors based on 10 evaluation criteria including the results from the investigation and the life traits each endangered plant has. As a result of evaluating the risk factors, these 34 endangered plants are classified into 3 groups: the first category comprises 12 endangered plants that require active and urgent conservation of habitats due to multiple risk factors; the second group has 16 endangered plants that should be able to persist with the removal of a few direct risk factors; the third category has 6 endangered plants that can persist with minimal management due to comparatively large distributed area and numerous individuals. It was found that most major risk factors in the population of endangered plants are caused by disruption of habitats and population extinction due to the increase of human habitation in the concerned areas, development and illegal harvesting. Futhermore, ecological collapse from decreasing habitats and malfunctioning mechanism of extinction and regeneration due to the changes of vegetational environment can be the other causes. From the area of the present investigations, we selected 5 regions according to the number of species and the frequency of appearance and importance of conservation measures. Also, we suggested a conservation strategy according to the regional characteristics. We suggest that the method for evaluating extinction risk of endangered plants includes distributional data and life traits of species. In addition, we underscore the necessity for understanding population dynamics and ecological niche of the each target species.