• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.14-21
• /
• 1985

This study was carried out in order to prevent the devaluation of wood itself and wood products causing by anisotropy, hygroscopicity, shrinkage and swelling - properties that wood itself only have, in order to improve utility of wood, by emphasizing the natural beautiful figures of wood, to develop the dimensional stabilization techniques of wood with PEG that it is a cheap, non-toxic and the impregnation treatment is not difficult, on the effects of PEG molecular weights (200, 400, 600, 1000, 1500, 2000, 4000, 6000) and species (Pinus densiflora S. et Z., Larix leptolepis Gordon., Cryptomeria japonica D. Don., Cornus controversa Hemsl., Quercus variabilis Blume., Prunus sargentii Rehder.). The results were as follows; 1) PEG loading showed the maximum value (137.22%, Pinus densiflora, in PEG 400), the others showed that relatively slow decrease. The lower specific gravity, the more polymer loading. 2) Bulking coefficient didn't particularly show the correlation with specific gravity, for the most part, indicated the maximum values in PEG 600, except that the bulking coefficient of Quercus variabilis distributed between the range of 12-18% in PEG 400-2000. In general, the bulking coefficient of hardwood was higher than that of softwood. 3) Although there was more or less an exception according to species, volumetric swelling reduction was the greatest in PEG 400. That is, its value of Cryptomeria japonica was the greatest value with 95.0%, the others indicated more than 80% except for Prunus sargentii, while volumetric swelling reduction was decreased less than 70% as the molecular weight increase more than 1000. 4) The relative effectiveness of hardwood with high specific gravity was outstandingly higher than softwood. In general, the relative effectiveness of low molecular weight PEG was superior to those of high molecular weight PEG except that Quercus variabilis showed more than 1.6 to the total molecular weight range, while it was no significant difference as the molecular weight increase more than 4000. 5) According to the analysis of the results mentioned above, the dimensional stabilization of hardwood was more effective than softwood. Although volumetric swelling reduction was the greatest at a molecular weight of 400. In the view of polymer loading, bulking coefficiency reduction of swelling and relative effectiveness, it is desirable to use the mixture of PEG of molecular weight in the range of 200-1500. To practical use, it is recommended to study about the effects on the mixed ratio on the bulking coefficient, reduction of swelling and relative effectiveness.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.96-103
• /
• 2003

This study was conducted to evaluate the tensile properties of metal plate connector for the domestic major softwoods, such as Korean red pine, Korean white pine, and Japanese larch. The maximum tensile load of Korean red pine was 3,612kgf in AA type, it was 1.2 and 1.7 times higher load than that of Japanese larch and Korean white pine. In EA type, it was 2,704kgf, and 1.1 and 1.5 times higher than the loads of Japanese larch and Korean white pine. The failure modes of metal plate connector were metal plate withdrawal, plate tensile failure, and wood shear block failure. The failure mode of Korean red pine connector was tensile failure of plate, that is reason of the high tensile load resistance for metal plate connections in Korean red pine. The mechanical properties of metal plate connector could be predicted by the Foschi model parameter. In the initial stage, the Korean red pine connector was stiffer than the other species. The design values for metal plate connector per tooth was 25, 22, and 15kgf for Korean red pine, Japanese larch, and Korean white pine in AA type and 19, 17, and 13kgf in EA type.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.64-71
• /
• 2005

In this study, we attempted to apply ultrasonic treatment for the preservative treatment of two softwood species, Korean pine and Japanese red pines to evaluate its effectiveness. Wood samples were submerged in oilborne preservative, copper naphthenate (NCU) and waterborne preservative, alkyl ammonium compound (AAC) and then treated with ultrasonic wave of 40 kHz, 400 W. After the treatment, the retention and penetration depth of these preservatives in the specimens were measured as a function of treatment time. Both the retention and penetration depth were continuously increased with increasing the treatment time up to 120 hours, where the retention reached about 95% by the application of AAC and the penetrating depth of 95% and 83% by the application of NCU, respectively for both species. The results of electronic microscopic observation showed that the improved retention capacity could be attributed to air deflation, wood extractive deflation working of ultrasonic wavelength, and destruction of wood pits which served as the pathway of preservatives. The results suggested that the use of ultrasonic treatment could be applied to thick wood veneers for the production of laminated wood products.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.78-86
• /
• 2005

Hwaseonji(Korean traditional paper) used for writing and painting has been made from the mulberry bast-fiber and the short-length fiber pulps, wood pulps. However, besides wood pulps, other short-length fiber pulps also can be used instead of wood pulps. Hence, this research was carried out to make the various Hwaseonjis with the different properties, using the five kinds of short-length fiber pulps respectively. The short-length fiber pulps used in this research were softwood bleached kraft pulp(SwBKP) hardwood bleached kraft pulp(HwBKP), rice-straw bleached sulfite pulp(RsBSP), bamboo bleached kraft pulp(BbBKP) and recycled pulp from vellem paper(RP). And, the mixture ratios of the mulberry bast-fiber pulp and short-length fiber pulps were 100:0, 80:20, 60:40, 40:60 and 20:80. After various Hwaseonjis were made from different mixtures mentioned above with hand-made method, physical properties and chinese ink blot property of each paper were measured. The strengthes were the highest in the Hwaseonji made from the mixture of the mulberry bast-fiber pulp and SwBKP. However, chinese ink blot property and smoothness were better when RsBSP, BbBKP or RP were mixed into the mulberry bast-fiber pulp. As a result, the various kinds of Hwaseonjis which the users can choose based on their needs were made.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.498-506
• /
• 2010

To use domestic softwood for structural lumber, appropriate grading system for quality, production and distribution condition of domestic lumber should be prepared. Kim et al. developed an automatic image processing system for grading domestic structural lumber (2009a and b). This study was carried out to investigate optimal image merging conditions for improving performance of image input system which is the key technique of image processing system, developed in the previous paper. To merge digital images of Korean larch lumber, choosing the green channel information of obtained image data showed the most accurate merging performance. As a pre-treatment process, applying Y-derivative Sharr's kernel filter could improve the image merging accuracy, but the effect of camera calibration was imperceptible. The optimal size of template image was verified as 30 pixel widths and 150 pixel heights. When applying the above mentioned conditions, the error length of images was 3.1 mm and the processing time was 9.7 seconds in average.

• Journal of architectural history
• /
• v.16 no.1
• /
• pp.9-28
• /
• 2007

We investigated the changes in the species of the woods used for Korean ancient and historic architectures, which include prehistoric excavated relics and existing wooden buildings in South Korea. The species data were collected from various sources such as excavation and repair reports, journal papers, and a few unpublished documents. We divided the building Periods as Paleolithic, Neolitic, Bronze Ages, Iron Age/Three Kingdoms, Koryo, Joseon (early, middle, late) and modem periods. In prehistoric periods, hardwoods were major species. Oak (Quercus spp.) woods dominated (94 percent in average); the others (5%) were Juglans mandshurica, Platycarya strobilacea, Castanea crenata, and few softwoods(1%). During Iron Age and Three Kingdom periods, oaks remained as a major species (57%) and others Platycarya strobilacea(21%), Castanea crenata(13%), and Pinus spp. (6%). The oak woods decreased in Koryo period and they occupied only 1.1%. Instead of oaks, pine (Pinus spp., 71%) and Zelkova serrata (22%) dominated in Koryo. In early and middle Joseon periods, pine woods (73%) remain as a major species and the others were oaks (14%) and Zelkova serrata (9%). As late Joseon came, the pine woods occupied more than 88%. In the late 19th and early 20th centuries, a few boreal species such as larch (Larix spp.) and spruce (Picea spp.), which grow in cold area, were found. We believe they were transported from northern Korea. The existing buildings in Korea are mainly from Joseon period and a few from late Koryo periods. During these periods, pine woods were used for most buildings. For such reason, pine woods were known as 'representative materials for historic buildings'. but earlier times, broad-leaved trees, i.e., oak and Zelkova woods were major materials. The changes in building materials resulted from both climate and human impacts. The dry climate and disturbed forests induce more pines in the mountains. We also compared the wood qualities of the species and found that Zelkova woods were superior ones and deserved more planting for future demands in the repair for historic buildings.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.1
• /
• pp.58-69
• /
• 2024

To evaluate the adhesive characteristics of mixed cross-laminated timber (CLT) using domestic softwoods structural lumber proposed by KS F 3020 and yellow poplar, penetration depth of adhesive and thickness of bonding line were analyzed based on the results of boiling water soaking delamination. 3 Types of adhesives and 2 types of major layer were divided into a 5 ply CLT using yellow popular as minor layer. The bonding performance of the mixed CLT as structural members was evaluated based on the KS F 2081. The thickness of bonding line between layers of the mixed CLT was measured with a scanning electron microscope, and the adhesive penetration depth in the layer members was measured with an optical microscope. As a result of boiling water soaking delamination test of mixed CLT, the CLT specimens using PRF and PUR adhesives met the requirements of KS F 2081. It was verified that the penetration path of the adhesive in the layes was mainly through the tracheid cell in the case of Japanese larch and Korean red pine layers, and through the vessel and radial tissue in yellow popular layers. The penetration depth of the adhesive was the highest for the PRF adhesive under the same pressing time conditions, and the thickness of the bonding line was in inverse proportion to the penetration depth in the case of the PUR adhesive.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.9-15
• /
• 2001

Specific energy curves for water removal in vacuum-press drying of different thick softwoods of red pine (Pinus densiflora), white pine (Pinus koraiensis), larch (L. leptolepis) and Western hemlock (Tsuga heterophylla) were split into three sections: increased slowly, fairly constant, and increased rapidly. Calculated specific energy for 3, 5, 7, 9 and 11cm thick lumber was a value of 0.483, 0.649, 0.814, 0.977 and 1.138kWh/kg of water, respectively. Specific energy almost linearly increased as lumber thickness increased, and specific energy for severe schedule was less than that for mild schedule. Average specific energy was 0.712kWh/kg and vacuum-press drying consumed less energy as compared with any other drying methods.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2001

Red pine (Pinus densiflora), white pine (Pinus koraiensis), larch (Larix leptolepis) and Western hemlock (Tsuga heterophylla) lumber were vacuum-press dried under three drying schedules to investigate current moisture contents (MC), drying rates and drying time factors related to five lumber thicknesses of 3, 5, 7, 9 and 11cm. Current MC could be estimated by drying factors such as lumber thickness, initial Me and drying time. Average drying rate from 30% to 15% Me was the highest for Western hemlock below fiber satuartion point, red pine, white pine and larch in the order of their magnitude. Drying rate curvilinearly decreased as lumber thickness increased. Drying time factor curvilinearly increased as lumber thickness increased.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.4
• /
• pp.26-31
• /
• 1987

The ultraviolet and infrared spectra of dioxane lignin from bamboo were investigated. 1. Spectrum curve type considerably resembled that of wood lignin. There were 3 absorption peak positions at 210nm(max. peak), at 260-270nm(shallow mini. peak), at 280nm(lower max. peak) as in the wood lignin spectra. 2. The lower minimum peak near at 280 nm is the typical peak of lignin. This peak does not exist exactly at 280 nm but from 282nm to 285nm in this bamboo UV spectra. The absorption intensities are equal in this region and the peak is not sharp. 3. The absorption band of aromatic nucleus is near at wave number $1550cm^{-1}$ in the IR spectra of bamboo lignin. The intensity at about 1040-$1130cm^{-1}$ and at about 1230-$1275cm^{-1}$ were similar in the hardwood lignin but reverse to that of softwood lignin spectrum.