• Journal of Astronomy and Space Sciences
• /
• 제35권4호
• /
• pp.295-308
• /
• 2018

In this study, orbit determination (OD) simulation for the Korea Pathfinder Lunar Orbiter (KPLO) was accomplished for investigation of the observational arc-length effect using a sequential estimation algorithm. A lunar polar orbit located at 100 km altitude and $90^{\circ}$ inclination was mainly considered for the KPLO mission operation phase. For measurement simulation and OD for KPLO, the Analytical Graphics Inc. Systems Tool Kit 11 and Orbit Determination Tool Kit 6 software were utilized. Three deep-space ground stations, including two deep space network (DSN) antennas and the Korea Deep Space Antenna, were configured for the OD simulation. To investigate the arc-length effect on OD, 60-hr, 48-hr, 24-hr, and 12-hr tracking data were prepared. Position uncertainty by error covariance and orbit overlap precision were used for OD performance evaluation. Additionally, orbit prediction (OP) accuracy was also assessed by the position difference between the estimated and true orbits. Finally, we concluded that the 48-hr-based OD strategy is suitable for effective flight dynamics operation of KPLO. This work suggests a useful guideline for the OD strategy of KPLO mission planning and operation during the nominal lunar orbits phase.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1231-1240
• /
• 2019

Unlike land-based nuclear power plants, a marine or floating reactor is affected by external forces due to ocean conditions. These external forces can cause additional accelerations and affect each system and equipment of the marine reactor. Therefore, in designing a marine reactor and evaluating its performance and stability, a thermal hydraulic safety analysis code is necessary to consider the thermal hydrodynamic effects of ship motion. MARS, which is a reactor system analysis code, includes a dynamic motion model that can simulate the thermal-hydraulic phenomena under three-dimensional motion by calculating the body force term included in the momentum equation. In this study, it was verified that the dynamic motion model can simulate fluid motion with reasonable accuracy using conceptual problems. In addition, two modifications were made to the dynamic motion model; first, a user-supplied table to simulate a realistic ship motion was implemented, and second, the flow regime map determination algorithm was improved by calculating the volume inclination information at every time step if the dynamic motion model was activated. With these modifications, MARS could simulate the thermal-hydraulic phenomena under ocean motion more realistically.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.129-136
• /
• 2019

The purpose of this study was to provide basic data necessary for the development of clothing that can improve the satisfaction of body shape of elderly men by examining subjective characteristics and characteristics of perception type of older men's body shape. Using the Q methodology, I investigated and analyzed the process of formation and main characteristics of subjectivity of various types of recognition that elderly men express about their body shape. There were four types of perception of body shape in elderly men: flat hip and bird legs skinny body, back bent and abdominal obese body, thick neck and upper body development body, forward cervical neck and protruding abdomen obese body. The actual body shape of elderly men was classified according to the bust, waist circumference, hip circumference, and body part angle. But recognition body shape of elderly men was classified by visual factors like the abdomen, the angle of the neck, the inclination of the back, the slope of the waist, and the degree of obesity. It is necessary to consider the trend of silver fashion which is increasing in demand. In addition, it is necessary to develop clothing patterns of comfortable fit through ergonomic study on the physical characteristics of older men. Consideration should be given to the design and pattern that can reduce the difference between the ideal body shape and the body shape recognized by older men.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권6호
• /
• pp.489-494
• /
• 2020

The Law method is observing the temporal bone. There are two types of methods: the double angle method, which manipulates the center ray angle of the tube twice, and the single angle method, which manipulates once. The purpose is to increase the reproducibility of the image by making vertical incidence by making an assistive device using a 3D printer. Two assistive devices with a wedge-shaped 8.5 × 10 × 2.3 cm, an inclined surface of 7.5 cm, and an inclination angle of 15° were fabricated. Assistive devices can be combined with each other in the form of grooves, and PLA (Poly Lactic Acid) is used as a material. In the first experiment, 10 examiners operated the tube 15° in the caudad direction and 15° in the anterior direction, and measured it with a protractor to conduct a reproducibility experiment. Second, two examiners acquired vertically incidence images using the existing law method and assistive devices, and measured the distance between each measurement point to evaluate the reproducibility. The tube center ray angle reproducibility experiment was not statistically significant, but the angle difference was up to 9° between examiners. The reproducibility experiment of radiographic images was not statistically significant with the conventional method, and the method using an assistive device was statistically significant. Therefore, regardless of skill level, an image capable of securing reproducibility, which is the advantage of vertical incidence, could be obtained.

• 운동영양학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2020

[Purpose] This study compared differences in trabecular bone architecture and strength caused by jump and running exercises in rats. [Methods] Ten-week-old male Wistar rats (n=45) were randomly assigned to three body weight-matched groups: a sedentary control group (CON, n=15); a treadmill running group (RUN, n=15); and a jump exercise group (JUM, n=15). Treadmill running was performed at 25 m/min without inclination, 1 h/day, 5 days/week for 8 weeks. The jump exercise protocol comprised 10 jumps/day, 5 days/week for 8 weeks, with a jump height of 40 cm. We used microcomputed tomography to assess microarchitecture, mineralization density, and fracture load as predicted by finite element analysis (FEA) at the distal femoral metaphysis. [Results] Both jump and running exercises produced significantly higher trabecular bone mass, thickness, number, and fracture load compared to the sedentary control group. The jump and running exercises, however, showed different results in terms of the structural characteristics of trabecular bone. Jump exercises enhanced trabecular bone mass by thickening the trabeculae, while running exercises did so by increasing the trabecular number. FEA-estimated fracture load did not differ significantly between the exercise groups. [Conclusion] This study elucidated the differential effects of jump and running exercise on trabecular bone architecture in rats. The different structural changes in the trabecular bone, however, had no significant impact on trabecular bone strength.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.33-39
• /
• 2023

The ball end mill is a type of cutting tool that is widely used to process complex mold shapes including aspheric surfaces. Unlike the flat end mill in which the cutting edge is formed on the cylindrical handle, the cutting edge is formed from the cylindrical handle to the hemispherical shape, which is advantageous for processing curved shapes. However, since the cutting speed continuously changes during machining due to the helix angle of the cutting edge or the machining inclination angle, it is difficult to obtain a precise machined surface. Therefore, in this paper, machining was performed while changing the helix angle of the ball end mill and the angle of the machining slope under the same cutting conditions for STD 11 material, which is widely used as a mold material. Through this, the effect of the two variables on the roughness of the machined surface was analyzed. As a result, if the helix angle was 0 degrees, it showed the best surface roughness of Ra. 0.16 ㎛. When the helix angle was 20 degrees, the best surface roughness of Ra. 0.18 ㎛ was occurred.

• 소성∙가공
• /
• 제32권3호
• /
• pp.145-152
• /
• 2023

The Inconel 706 alloy is a nickel-based super alloy and requires a large load for hot forging due to its excellent mechanical properties at high temperature. Rotary forging process is an innovative metal forging process where workpiece is gradually deformed by the revolving conical upper die with an inclination angle. This process allows that the workpiece is partially in contact with an upper die during the process so that the press force is considerably lower compared with the conventional upsetting process. In this study, experiments of rotary forging process and conventional upsetting process for cylindrical parts using Inconel 706 where conducted to investigate the formability of rotary forging process. And microstructure analysis and mechanical properties of Inconel 706 were performed to investigate the effect of rotary forging process on the material property.

• 한국의류학회지
• /
• 제6권2호
• /
• pp.1-7
• /
• 1982

Baik-Eui is the white clothes and Korean typical way of wearing, Baik-Eui was used by the over 80$\~$90 percents of people, which proves that Baik-Eui was the very clothes of common people. Moreover, even King himself in Koryo Dynasty is said to have worn white clothes when he was out of official hours. And wearing Baik-Eui was regarded as polite manners among the noble men in Yi Dynasty in spite of strict prohibitions of wearing it. That fact proves that it was loved by Korean people in general. Baik-Eui can be found its origin from many peoples of North East Asia in ancient time. Some say that wearing Baik-Eui is considered as a kind of worship of the sun, or purity of Korean people. But from the economical point of view, Baik-Eui was primitive in it's color. It means that their clothes were made from original clothes, not dyed. This study on the social reasons affecting to Baik-Eui, they are summarized as follows; 1. This Baik-Eui had been originated from the ancient economical and rigid circumstances of society. Everlasting poverty and diprivation of joy in life of Korean naturally made them have inclination of wearing it 2. Also common people were restricted in their choice of dress color by government. Even rich could not wear a colored clothes except the dyes permitted by them. 3. Socially, People wore white clothes through various kinds of ceremony, among which funeral was the most important. As we had the large family system, and usually the funeral at that time was longer in its period than now. Thus, Korean got accustomed to wear whit clothes more and more.

• 대한소아치과학회지
• /
• 제25권2호
• /
• pp.430-440
• /
• 1998

This study was performed to establish the cephalometric standards and to compare measurement of Korean children in the Field I, II, III, IV, V, VI to Japanese and Caucasians by the Ricketts' analysis. Lateral cephalograms of 24 males and 27 females with normal occlusion and acceptable profile 9 years of age were obtained and statistically analyzed. 1. Norms of Korean males, females and both sexes at 9 years old were established. 2. Significant differences between male and female exist in incisor overjet, maxillary incisor protrusion, mandibular incisor inclination, cranial deflection, corpus length. Maxillary incisor of male was more protrude and overjet was larger than female 3. Korean was similar to Japanese but different from Caucasian. Compare with facial axis and facial depth, chin was retruded dolichofacial pattern and due to large mandibular plane angle and small corpus length, mandibular plane was inclined and mandible body was short. Compare with porion location, ramus position and posterior facial height, ramus was long and located posterior. Compare with maxillary depth and maxillary height, maxilla was located posterior and inferior. The distance between the upper molar and PTV was short, the amount of distalization is limited. Maxillary and mandibular incisor were more protruded and also lower lip was more protruded to esthetic line 4. In comparison between 9 and 11 years old, growth changes of facial depth, mandibular plane angle, corpus length and upper molar position were larger than that of Japanese and Caucasians.

• 광물과 암석
• /
• 제33권3호
• /
• pp.273-291
• /
• 2020

화강암 석산에서 1번 면, 2번 면 및 3번 면으로 알려진 세 직교하는 분할면의 강도 특성을 검토하였다. R, G 및 H 공시체는 거창 및 합천 지역에서 분포하는 쥬라기 화강암류의 블럭 샘플로부터 획득하였다. 이들 세 공시체의 장축의 방향은 세 면 각각에 수직이다. 세 면에 대한 판별에 유용한 주요 사항은 다음과 같다. 첫째, R, G 및 H 공시체의 일축압축강도와 관련된 세 그래프의 스케일링 특성을 보여 주는 도면을 작성하였다. 강도의 증가에 따라 세 공시체의 그래프는 H < G < R의 순으로 배열한다. 공시체 내부의 조직균일도를 지시하는 세 공시체에 대한 그래프의 경사각을 비교하였다. H 공시체(θ^H, 24.0°~37.3°)에 대한 상기한 각이 세 공시체 중에서 가장 낮다. 둘째, 두 공시체의 평균압축강도의 조합을 나타내는 RG, GH 및 RH 공시체의 세 그래프와 관련된 스케일링 특성을 도출하였다. 다양한 형태를 취하는 이들 세 그래프는 GH < RH < RG의 순으로 배열한다. 섯째, 강도차(Δσ_t)와 경사각(θ) 사이의 상관도를 작성하였다. 위의 두 파라미터는 -0.003의 지수(λ)를 갖는 지수함수의 상관성을 보여 준다. 두 화강암에서, RH-그래프의 경사각(θ^RH)이 가장 낮다. 넷째, 세 공시체에 대한 세 종류의 압축강도 그리고 각 공시체에 가해진 압축하중에 평행 배열하는 두 조의 미세균열에 대한 다섯 파라미터 사이의 상관 관계를 보여 주는 여섯 유형의 도면을 작성하였다. 거창 및 합천화강암에 대한 이들 도면으로부터, 빈도수(N, 0.872) 및 밀도(ρ, 0.874)와 함께 총 길이(Lt)에 대한 상관계수(R²)의 평균값(0.877)이 가장 높다. 또한, 세 공시체의 최소(0.768) 및 최대(0.804)의 압축강도에 비하여 평균압축강도와 관련된 상관계수의 값(0.829)이 보다 높다. 다섯째, 거창화강암의 세 공시체에서 발달된 상기의 두 조의 미세균열과 평행한 방향으로 측정한 압열인장강도의 분포 특성을 도출하였다. 관련 도면으로부터, R, G 및 H 공시체에 해당하는 이들 인장강도에 대한 세 그래프는 H(R1+G1) < G(R2+H1) < R(R1+G1)의 순을 보여 준다. 인장강도에 대한 세 그래프의 배열순과 압축강도에 대한 세 그래프의 배열순과 상호 부합한다. 따라서, 세 공시체의 압축강도는 상기한 세 유형의 인장강도와 상호 비례한다. 여섯째, 상기한 세 그래프에서 도출한 각 누적수(N=1~10)에 해당하는 세 인장강도 그리고 각 그래프에 해당하는 다섯 파라미터의 값 사이의 상관 계수를 도출하였다. 10개의 상관도에서 도출한 각 파라미터에 대한 상관 계수의 평균값은 밀도(0.763) < 총 길이(0.817) < 빈도수(0.839) < 평균 길이(Lm, 0.901) ≤ 중앙 길이(Lmed, 0.903)의 순으로 증가한다. 일곱째, 세 공시체에 대한 일축압축강도 그리고 압열인장강도 사이의 상관도를 작성하였다. 상기한 상관도는 세 종류의 압축강도 그리고 다섯 그룹(A~E)의 인장강도를 근거로 아홉 유형으로 분류하였다. 관련 도면으로부터, 최소압축강도를 제외한 평균 및 최대압축강도와 함께 인장강도가 증가할수록, 상관계수의 값은 급격하게 증가한다.