• 한국비블리아학회지
• /
• 제26권1호
• /
• pp.101-134
• /
• 2015

본 연구의 목적은 국내 신학대학교도서관의 장서개발정책 수립 요인과 장서개발정책 모형을 제시하기 위함이다. 이를 위하여 장서개발정책 사례로 국외 신학대학교도서관의 장서개발정책 구성요소 및 세부사항을 분석하였고, 국내 신학대학교도서관의 장서개발정책 현황을 파악하기 위하여 설문조사를 실시하였다. 조사 결과를 바탕으로 국내 신학대학교도서관에서 장서개발정책 수립을 위해 고려해야 할 외적 환경요인과 내적 요인을 밝히고 이를 기초로 서문, 장서의 선정, 장서의 수집, 예산, 장서의 유지 및 관리, 상호협력과 지적자유, 장서개발정책 개정의 7개 영역으로 구분하여 국내 신학대학교도서관의 장서개발정책 모형을 제안하였다.

• 한국기록관리학회지
• /
• 제5권1호
• /
• pp.23-46
• /
• 2005

본 연구는 대학기록관의 수집정책 수립에 대한 연구이다. 한신대학교를 모델로 하여 수집정책 수립의 핵심부분인 수집분야를 설정하고, 기록관의 사명문 작성, 수집분야 및 우선순위 정의, 기록물 수용을 위한 지침과 관련한 내용들을 항목별로 검토, 적용하여 보았다. 대학기록관의 수집정책 수립을 통해 수집업무는 보다 적극적이고 체계적으로 이루어질 수 있을 것이다.

• 한국문헌정보학회지
• /
• 제43권4호
• /
• pp.193-215
• /
• 2009

정보자원의 지속적 증가와 다양화 그리고 네트워크를 이용한 정보 접근과 활용 등 정보환경의 변화로 도서관 장서개발 정책은 더욱 정교하게 변화되어야 하는 상황에 있다. 국립중앙도서관은 이러한 시대적 조류를 반영하고 그 역할과 사명을 다하기 위하여 보다 체계적이고 합리적인 국가장서개발정책을 수립해야 할 것이다. 본 연구에서는 우리나라와 주요 선진국의 국립도서관 장서개발정책을 조사하고 이를 기반으로 우리나라 국가장서 구축을 위한 기본모형을 도출하였다. 기본모형은 크게 하이브리드장서 구축, 협동연계장서 구축, 장서 평가, 그리고 장서개발정책 성문화 등 네 가지의 서브모형으로 구성되어 있다. 모형별 세부 내용과 추진방안이 제시되었다.

• 정보관리학회지
• /
• 제25권4호
• /
• pp.269-281
• /
• 2008

본 논문은 북미 대학에서 한국학 장서 구축의 역사가 오래된 대학을 대상으로 그동안 구축된 한국학장서의 현황 규모에 대한 적정성을 현장을 중심으로 객관적으로 조사 분석한 것이다. 장서와 이용자 그룹에 근거하여 ACRL 표준공식을 적용하여 분석하였고, ARL 중앙값을 산출하여 비교하였다. ACRL 기준에 따른 평가결과, 이 대학의 한국학 장서는 B 등급으로 평가되었고, ARL 비교치 결과에서도 비교 대상교 15개 중에서 중간정도에 그치는 것으로 나타나서, 한국학 장서의 꾸준한 증가를 통해 한국학교육과정 지원을 보다 충실히 해야 한다는 결론을 도출하게 되었다.

• 한국산업보건학회지
• /
• 제23권4호
• /
• pp.341-347
• /
• 2013

Objectives: The aim of this study is to investigate the differences in airborne TDI concentrations based on the filter collection method and liquid collection method and to compare airborne TDIs concentrations by sampling method change when using the filter collection method in the spray-painting process. Methods: For the sample measurement, the filter collection method(OSHA#42) and liquid collection method(NIOSH#5522) were used; for the sampling method, the full-period single sampling and full-period consecutive sampling methods were used. The samples were collected in spray-painting and drying process locations. Results: In all samples collected from the spray-painting and drying process locations through the filter collection and liquid collection methods, greater amounts of 2,6-TDI than 2,4-TDI were detected. When the TDI collection concentrations based on the sampling methods were compared, the concentrations of 2,4-TDI and 2,6-TDI collected by the consecutive sampling method were higher than the concentrations of 2,4-TDI and 2,6-TDI collected by the single sampling method for both the filter collection method and liquid collection method used in the spray-painting process. These differences were statistically significant. Conclusions: When TDI collection concentrations based on the sample measurement methods were compared, the concentration of 2,4-TDI and 2,6-TDI collected through the liquid collection method were higher than the concentrations of 2,4-TDI and 2,6-TDI collected by the filter collection method, and the differences were statistically significant. In the drying process, no difference was shown in the collection concentrations of 2,4-TDI and 2,6-TDI with the two measurement methods.

• 한국미생물학회:학술대회논문집
• /
• 한국미생물학회 2009년도 International Meeting of the Microbiological Society of Korea
• /
• pp.70-71
• /
• 2009

• 한국유체기계학회 논문집
• /
• 제16권3호
• /
• pp.48-53
• /
• 2013

Due to the urbanization, lots of people are living in cities. It is very convenient to live in the cities for the people but at the same time, the highly populated city has several environmental problems. During delivery process of large amount of municipal waste generated from the cities, the automobile emission and traffic jam have been occurred. The waste collection in the cities has been mainly done by using labour force and delivery truck. This is the conventional waste collection up to now. Recently, new technologies like automated waste collection system and capsule transportation have been introduced. Conventional waste collection mainly relied on the labour force and truck delivery does not need to invest a lot of money for the start-up. However, it requires to pay the operational cost both for the labour force and the truck delivery. On the contrary to this conventional waste collection, the automated waste collection and capsule transportation require high initial investment cost. However, the automated waste collection and capsule transportation can reduce significantly the pollutants emission, traffic jam by the waste trucks and actual waste collection cost per ton. In dealing with the waste collection in the cities, new waste collection technologies could be properly combined with the conventional waste collection for the effective municipal waste treatment.

• 농촌계획
• /
• 제25권3호
• /
• pp.11-18
• /
• 2019

It is widely known that agricultural plastic waste incineration by farmers may cause big forest fire or fine dust in rural areas. Hence, how to increase the rate of collection and recycling of the agricultural plastic waste is of concern to policy makers especially for rural environment. The purpose of this study is to find the determinants of the collection rate of agricultural plastic waste. This study used the data from 'Research on Agricultural Waste' by the Korea Environment Corporation from year 2012 to 2015 for 163 regions. This study found that the compensation rate for collection, the frequency of collecting services, and the quality of waste are important to increase the collection rate. And the regions with more elderly and low income people are more likely to have higher collection rate. Finally, the chief producing regions that are specialized in a certain crop shows higher collection rate.

• 한국의류학회지
• /
• 제32권4호
• /
• pp.562-572
• /
• 2008

This study is to understand the current situation of the Seoul Collection and suggest market oriented strategies in order to establish a more effective fashion market. Three elements-time, form, and, place-were defined to analyse the dynamics of the collection and two factors-customer/competitor oriented information and information interaction among participants-were employed to evaluate the Seoul collection toward market orientation. The data were collected from the collection participants via an in-depth interview. The identified major market factors were: 1. Time-In order to create a desirable market, the opening time of the Seoul Collection needs to be rescheduled in accordance with the openings of other countries. Also the time must be suitable to the buyer's movement. 2. Product-Products which did not meet the needs of the market and their unrealistically high prices were two main factors that hindered sales. 3. Place-Although the place was a vital factor to the success of the collection, the facility was not fully a suitable location for buyers to place orders. Additionally, the analyzed data indicated the low market-oriented Seoul collection. Vital to elevating the Seoul Collection to meet the global standard, therefore, more practical research and merchandise planning should be arranged in advance.

• 한국문헌정보학회지
• /
• 제8권
• /
• pp.233-263
• /
• 1981

The purpose of this study is to bring out the most reasonable and feasible evaluation methods of research library collection in Korea. At the very outset, writer tried to define the purpose and the necessity of collection evaluation. Writer described a collection evaluation is to gain the data for decision making on selection policy, weeding and storage project, and explained it is one of the procedures of a collection development system operation of being explained as repeated three procedures through a collection development plan, an implimentation of the set plan(selection process) and a collection evaluation. Writer also pointed out the fact many libraries in Korea are apt to by pass or overlook this important process. Writer then defined the criteria of a collection evaluation as the measurement of the proportion of library holding's capability to meet users' demands and that of the degree of total collection's utilization. Writer introduced and analysed seven existing collection evaluation methods and concluded the method by a survey of users' needs and opinion and the method by a circulation survey are the most feasible and reasonable methods that can be applied. Writer also added that using above two evaluation methods together can enhance the effectiveness of collection evaluation.