• Journal of Periodontal and Implant Science
• /
• v.26 no.4
• /
• pp.989-1002
• /
• 1996

The purpose of this study was to determine the effect of a pulsed Nd:YAG laser irradiation on human gingival tissues. The patients, who were planned to be treated by clinical crown lengthening procedure and gingivectomy, were selected. All the patients received oral hygiene instruction, scaling and root planing at preoperation. The crest of gingival tissue on upper and lower anterior teeth was irradiated by a pulsed Nd:YAG laser(El. EN. EN060, Italy) with a fiber optic of 300 m in contact mode for 20 seconds. Gingival tissues were divided into 4 groups according to the laser power of 1.0W(10Hz, 100mJ), 2.0W(20Hz, 100mJ), 3.0W(30Hz, 100mJ) and 4.0W(40Hz, 100mJ). Immediately after the laser irradiation, the specimens were excised, fixed 10% neutral formalin, sectioned $4-6{\mu}m$ thick, stained by Hematoxylin-Eosin and Periodic Acid Schiff stain and observed under light microscope. The removed tissue depth and the coagulated layer depth due to a laser irradiation by a laser irradiation were measured on the microphotographs. The difference of measurements according to the different laser power was statistical1y analyzed by Kruskal Wallis Test with SAS program. The results were as follows : 1. In histologic findings of irradiated gingival tissues; a. In the irradiated gingival specimen with 1.0W laser power, some vesicles were observed in limited superficial layer of gingival epithelium. b. In the irradiated gingival specimen with 2.0W and 3.0W laser power, the epithelium was almost removed except for the traces of viable basal cell remnants at ret peg, and coagulation necrosis related with the thermal effect of laser was noted. c. In the irradiated gingival specimen with 4.0W laser power, complete removal of epithelium, partial removal of underlying connective tissue, and the coagulation necrosis of subjacent gingival tissue were shown. 2. The removed tissue depth was deeper in the irradiated specimens with higher power. There was a statistical significance in the difference of removed tissue depth between 1.0W group ($44.54{\pm}6.99um$) and 3.0W group ($99.75{\pm}6.64{\mu}m$), and between 1.0W group($44.54{\pm}6.99{\mu}m$) and 4.0W group($111.36{\pm}4.50{\mu}m$), and between 2.0W group($98.01{\pm}4.53{\mu}m$) and 4.0W group($111.36{\pm}4.50{\mu}m$)(P<0.05). 3. The coagulated layer depth was deeper in the irradiated specimens with higher power. There was a statistical significance in the difference of coagulated layer depth between 1.0W group($31.82{\pm}8.99{\mu}m$) and 3.0W group($55.99{\pm}20.94{\mu}m$), and between 1.0W group($31.82{\pm}8.99{\mu}m$) and 4.0W group($83.68{\pm}10.34{\mu}m$)(P<0.05). From this study, the results demonstrated that the effects of a pulsed Nd:YAG laser irradiation on gingival tissues seemed to depend on the laser power and that the irradiation with high power could be harmful to adjacent healthy tissue.

• Journal of dental hygiene science
• /
• v.8 no.1
• /
• pp.7-12
• /
• 2008

The purpose of this study is to improve the oral health after understanding the usage status of oral health items and to conduct active guidance for prohibition of smoking. The survey of 326 visitors for continuous oral health management in the dentist from April 2nd 2007 to May $20^{th}$ is accomplished. The data is handled from the SPSS 12.0 statistics program and we can get the results like below. 1. The number of people answering the usage of the smooth toothbrush is 64.5% which is higher in smoking peoples than in non-smoking ones (p < 0.001). Non-smoking people 61.4% answering '3 minutes more' per brushing their teeth is higher than smoking respondents. 2. The more used device is the interdental brush by non-smoking people 36.7% than smoking ones and the answer. 3. The percentage answering 'recommendation in the dentist' in the question about the motive using the oral health devices are nearly same in 69.6 % and 67.5% by non-smoking and smoking persons. The most reason not using these devices is 'don't know how to use this' and the number of smoking guys is 38.7% which is higher than that of non-smoking ones(p < 0.05). 4. The percentage of answering 'regular visiting the dentist', the method for oral health management is 28.3% in smoking parts and 35.3% in non-smoking ones which is slightly higher. From this study, the usage and the recognition of oral hygiene devices of the patient with smoking is a little bit lower than those of non-smoking patients and small difference is shown. So public relations of the effects and the necessity of the oral hygiene devices to all people have to be performed and the education and the activity prohibiting smoking are expanded by the dental hygienist based on the understanding of oral health when the patients are smoking or not.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.13-19
• /
• 2013

This study evaluated the change of color and the microhardness according to time-out using the office bleaching with in vitro test after bleaching one time 1 day per week, total three times, for the control group and three times per 1day for the experimental group. $L^*$ was increased in both groups. Group 1 showed a significant increase statistically between before and after tooth whitening (p<0.05). Group 2 showed a significant increase statistically between before and after tooth whitening (p<0.05). ${\Delta}E^*$ was huge in both groups. In group 1, it was great in terms of statistical significance between 1 day and 7 days after tooth whitening (p<0.05). In group 2, it was the greatest between before and 1 day after tooth whitening and was significant statistically as well (p<0.05). Vickers hardness number (VHN) decreased in both groups. In group 1, VHN decreased over time and the difference was significant statistically (p<0.05). In group 2, VHN decreased over time and the difference was significant statistically (p<0.05). Percentage microhardness loss was great in both groups. In group 1, it was the greatest between 1 day and 7 days after the treatment, and it was significant statistically (p<0.05). In group 2, it was the greatest between before and 1 day after the treatment, and it was significant statistically (p<0.05). Put together, the more frequent tooth whitening a day is, the longer the period of tooth whitening when applying the same frequency, the greater color change was, however the microhardness decreased, in regard to the results over time using 15% hydrogen peroxide tooth whitening product for professionals.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.333-340
• /
• 2017

The prevalence of periodontal disease was steadily increased. The best prevention methods for periodontal disease are teeth brushing and scaling. The purpose of this study was to investigate the status of scaling experience and related factors among some workers. Total 455 workers in 5 manufacturing companies in Gwangju were selected using convenience sampling method. General characteristics, work-related characteristics, oral health-related characteristics and scaling experience were collected by self-reported questionnaires. Chi-square tests, t-tests and multiple logistic regression analysis were performed to investigate the factors influencing the scaling experience using SPSS software. Statistical significance was defined as a p-value<0.05. The proportion of scaling experience during the past year was 47.0%. In simple analysis, age, current working position, number of oral disease, interest in oral health, use of secondary oral products, oral health screening use, oral health education experience and awareness of scaling inclusion in the National Health Insurance (NHI) coverage were associated with scaling experience. Finally, the odds ratios (ORs) for scaling experience were significantly higher in younger subjects (adjusted OR [aOR], 3.09; 95% confidence internal [CI], 1.60~5.96), assistant manager (aOR, 2.68; 95% CI, 1.55~4.63), subjects with high interest in oral health (aOR, 2.15; 95% CI, 1.02~4.52), subjects with oral health screening use (aOR, 2.76; 95% CI, 1.50~5.11) and awareness of scaling inclusion in the NHI coverage (aOR; 2.91, 95% CI, 1.80~4.72) in multiple logistic regression analysis. Scaling experience was relatively low (47.0%). The related factors with scaling experience were age, working position, use of screening and awareness of scaling inclusion in the NHI coverage. Considering these factors will increase the utilization rate of scaling.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.421-429
• /
• 2007

Some researchers suggested that tactile sensor system would be useful in evaluating masticatory muscles of TMD patients, but there were few studies on the effects of chewing with time. The aim of this study was to investigate the change of elasticity and stiffness for masseter and temporal muscles of normal subjects before, during and after gum chewing and to obtain the baseline data for further researches on the elasticity and stiffness for masticatory muscles of TMD patients. Stiffness and elasticity of their anterior temporalis and inferior masseter muscle were measured bilaterally by a tactile sensor system. Each subject was instructed to sit on a chair for evaluation of masticatory muscles. Before operating the sensor, the thickest skin area over anterior temporalis and inferior masseter muscles were selected as the points to be pressed by a tactile sensor, and marked with a pen. While the teeth of subjects were lightly contacted, the probe of the tactile sensor was placed perpendicularly over the marked point over the skin, followed by computer-controlled movement including gently pressing straight down on the muscle for a second and retracting. All subjects were instructed to chew gum (Excellent Breath, Taiyo Co., Japan) bilaterally with a velocity of 2 times per second for 40 minutes after the first measurement had been performed for the baseline data of all subjects. The measurements had been repeated during chewing with 10 minutes of interval and continued for 40 minutes with same interval after chewing. Resultantly, the decrease of elasticity and the increase of stiffness in masticatory muscles can be seen significantly within 10 minutes after chewing and those were maintained during chewing without significant change with chewing time. The elasticity of muscles was recovered within 10 minutes after stopping chewing, but the stiffness was recovered more lately than elasticity by about 10 minutes. Based on these results, it can be concluded that elasticity and stiffness of muscles would be good indicators to evaluate the masticatory muscles objectively, when more supported by further researches.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.164-172
• /
• 2010

During a composite resin restoration, an anticipating contraction gap is usually tried to seal with low-viscosity resin after successive polishing, etching, rinsing and drying steps, which as a whole is called rebonding procedure. However, the gap might already have been filled with water or debris before applying the sealing resin. We hypothesized that microleakage would decrease if the rebonding agent was applied before the polishing step, i.e., immediately after curing composite resin. On the buccal and lingual surfaces of 35 extracted human molar teeth, class V cavities were prepared with the occlusal margin in enamel and the gingival margin in dentin. They were restored with a hybrid composite resin Z250 (3M ESPE, USA) using an adhesive AdperTM Single Bond 2 (3M ESPE). As rebonding agents, BisCover LV (Bisco, USA), ScotchBond Multi-Purpose adhesive (3M ESPE) and an experimental adhesive were applied on the restoration margins before polishing step or after successive polishing and etching steps. The infiltration depth of 2% methylene blue into the margin was measured using an optical stereomicroscope. The correlation between viscosity of rebonding agents and mciroleakage was also evaluated. There were no statistically significant differences in the microleakage within the rebonding procedures, within the rebonding agents, and within the margins. However, when the restorations were not rebonded, the microleakage at gingival margin was significantly higher than those groups rebonded with 3 agents (p < 0.05). The difference was not observed at the occlusal margin. No significant correlation was found between viscosity of rebonding agents and microleakage, except very weak correlation in case of rebonding after polishing and etching at gingival margin.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.509-516
• /
• 2016

A dental panoramic radiography which usually uses low level X-rays is subject to the Nuclear Safety Act when it is installed for the purpose of education. This paper measures radiation dose and spatial dose rate by usage and thereby aims to verify the effectiveness of radiation safety equipment and provide basic information for radiation safety of radiation workers and students. After glass dosimeter (GD-352M) is attached to direct exposure area, the teeth, and indirect exposure area, the eye lens and the thyroid, on the dental radiography head phantom, these exposure areas are measured. Then, after dividing the horizontal into a $45^{\circ}$, it is separated into seven directions which all includes 30, 60, 90, 120 cm distance. The paper shows that the spatial dose rate is the highest at 30 cm and declines as the distance increases. At 30 cm, the spatial dose rate around the starting area of rotation is $3,840{\mu}Sv/h$, which is four times higher than the lowest level $778{\mu}Sv/h$. Furthermore, the spatial dose rate was $408{\mu}Sv/h$ on average at the distance of 60 cm where radiation workers can be located. From a conservative point of view, It is possible to avoid needless exposure to radiation for the purpose of education. However, in case that an unintended exposure to radiation happens within a radiation controlled area, it is still necessary to educate radiation safety. But according to the current Medical Service Act, in medical institutions, even if they are not installed, the equipment such as interlock are obliged by the Nuclear Safety Law, considering that the spatial dose rate of the educational dental panoramic radiography room is low. It seems to be excessive regulation.

• Journal of Veterinary Clinics
• /
• v.32 no.2
• /
• pp.141-147
• /
• 2015

Based on the results of previous studies, endoscopic biopsy sample's quality has a major impact on its adequacy for histopathology, and that the nature of the biopsy forceps can influence the specimen quality. The present study compared the effects of three different types of endoscopic biopsy forceps and two different operators on sample quality and adequacy for histopathology in three healthy cats. Every biopsy was performed between the major papilla and caudal duodenal flexure, and each operator performed five biopsies with each type of forceps on each cat, for a total of 90 biopsies. One pathologist evaluated the quality and adequacy of the obtained samples. Biopsies performed with large-cup forceps provided heavier and longer samples than the standard round forceps. With the same size forceps, the presence of alligator teeth had no effect on sample quality or adequacy for histopathological examination and assessment. Based on the results of the present study, although the standard round forceps could be used to obtain adequate samples for histopathology, large-cup forceps such as the standard oval and alligator jaw type have the advantage of obtaining high quality endoscopic samples.

• Restorative Dentistry and Endodontics
• /
• v.36 no.5
• /
• pp.419-424
• /
• 2011

Objectives: This study was aimed to determine the effects of temporary sealing materials on microtensile bond strength between resin-coated dentin and resin inlay and to compare the bonding effectiveness of delayed dentin sealing and that of immediate dentin sealing. Materials and Methods: The teeth were divided into 4 groups: group 1, specimens were prepared using delayed dentin sealing after temporary sealing with zinc oxide eugenol (ZOE); group 2, specimens were prepared using immediate dentin sealing and ZOE sealing; group 3, specimens were prepared using immediate dentin sealing and Dycal (Dentsply) sealing; group 4, specimens were prepared using immediately sealed, and then temporarily sealed with a resin-based temporary sealing material. After removing the temporary sealing material, we applied resin adhesive and light-cured. Then the resin inlays were applied and bonded to the cavity with a resin-based cement. The microtensile bond strength of the sectioned specimens were measured with a micro-tensile tester (Bisco Inc.). Significance between the specimen groups were tested by means of one-way ANOVA and multiple Duncan's test. Results: Group 1 showed the lowest bond strength, and group 4 showed the highest bond strength (p < 0.01). When temporary sealing was performed with ZOE, immediate dentin sealing showed a higher bonding strength than delayed dentin sealing (p < 0.01). Conclusions: Based on these results, immediate dentin sealing is more recommended than delayed dentin sealing in bonding a resin inlay to dentin. Also, resin-based temporary sealing materials have shown the best result.