• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.507-514
• /
• 2011

최근 국내 협력 업체와 함께 국산 전동차를 제작하였다. 전동차에서 주 제어장치는 열차종합제어장치인 TCMS로서 시스템 성능, 편리한 유지 관리 그리고 서비스 관점의 유연성을 고려하면서 TCMS의 요구분석을 수행하였다. 이를 기반으로 새로운 내부 버스 구조와 RTOS로서 QNX를 적용하게 되었다. TCMS 기능을 서비스 장치와 제어/감시 기능으로 분리하여 열차의 성능 개선과 편리한 유지 보수 그리고 고객 요구를 만족하였다. TCMS는 하드웨어에 구현된 다양한 프로토콜을 통하여 열차에 장착된 제어 장치를 제어하고 관리한다. 시스템의 성능 검증과 안정성을 확인하기 위하여 EMC/EMI를 비롯한 다양한 시험을 KOLAS 인증 기관과 한국철도기술연구원에서 시행하였다. 현재 TCMS는 새로 개발된 열차에 장착되어서 시운전을 통하여 성능 검증을 수행하고 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.933-935
• /
• 2017

이 논문은 유도무기의 비행 중에, 공력가열을 받는 환경조건으로부터 유도무기를 보호하는 열방호용 코르크계 외부 인슈레이션 재료의 곰팡이 영향 연구에 관한 것이다. 필라멘트 와인딩 공법으로 제작된 복합재 연소관의 외부에 적층하는 코르크계 재료를 고려하였으며, 주어진 시스템에서의 효율적인 시스템 개발을 위해서 요구되는 요구조건 분석의 중요성을 고려하였다. 코르크계 복합재료를 유도무기용 복합재연소관의 외부 인슈레이션 재료로 사용하는데 요구되는 기본 요구조건에 대한 요구조건 분석에 의한 연구항목의 실험적 연구를 수행하였다. 해당 코르크계 재료의 곰팡이 영향 연구를 위해 곰팡이가 배양된 시편의 전단시편(QLS) 기계적물성 시험을 수행, 곰팡이 배양 전후의 결과와 비교하였으며, 곰팡이 발생 방지연구를 위해 곰팡이 방지페인트 유무에 따른 항곰팡이 효과발현을 공인기관 인증시험을 통해 확인하였다.

• 한국식생활문화학회지
• /
• 제20권1호
• /
• pp.21-34
• /
• 2005

The purpose of the study to examine the requirement of food service statistical account. the questionnaire was composed of two part: the traits of food service statistical accounts by USA and Japan and demographic characteristics. 325 questionnaires were distributed by mail to the member of Korean Food service Management Society and Korea university and college Culinary Management Faculty Association and 92 questionnaires were returned. the data was completed using the SPSS for frequency, mean, t-test, and ANOVA test. As a result of the follows. the 23 traits showed a high priority placed. Seeing the category, Number of customer, unit volume, solid waste, and information technology and application were higher than employee information. Comparing company members to academic members, both of them thought that dimension of unit, sales result, and number of customer. However, company member group indicated that employee information was important.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.484-491
• /
• 2016

본 연구의 목적은 항공기 메커니즘 구조물에 사용되는 금속 소재 토크바를 복합소재를 이용하여 무게절감이 가능한 구조물을 개발 하는것에 있다. 토크바에 주어진 하중조건 및 구조물의 설계 경계조건에 부합하는 유한요소모델을 이용하여 구조해석을 수행 하였다. 이를 바탕으로 최적화된 복합소재의 적층 조건 및 토크바의 두께 요건을 설정하였다. 설계요건에 맞게 제작된 시제품을 이용하여 복합소재 토크바의 비틀림 시험을 실시하였으며, 동구조 시험을 통해서 토크바의 강도 및 강성 요구조건을 만족한다는 것을 증명하였다.

• 성인간호학회지
• /
• 제26권6호
• /
• pp.621-629
• /
• 2014

Purpose: The purpose of this study was to investigate the nutritional support, gastric residual volume, and nutritional status of the intensive care unit (ICU) patients on enteral feeding. Methods: A descriptive longitudinal design was used to collect 5 day data on enteral nutrition of 52 ICU patients in an university hospital. Nutritional support was calculated with actual caloric intake compared to individual caloric requirement. Residual volumes were measured prior to routine feedings, and the serum albumin levels and the total lymphocyte counts were checked to evaluate nutritional status. The data were analyzed using one group repeated measures ANOVA, paired t-test, and Spearman's bivariate correlation analysis. Results: The subjects received their first enteral feeding on the $5.75^{th}$ day of ICU admission. The mean nutritional support rate was 49.1% of the requirement, however prescription rate and support rate were increased as time goes by. Gastric residual volumes were less than 10 cc in 95% cases. A significant negative correlation was found between nutritional support and nutritional status. Conclusion: The nutritional support for ICU patient was low compared to the requirement, and their nutritional status was worse than at the time of ICU admission. Further studies are necessary to develop nursing interventions for improving nutritional support for ICU patients.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.51-54
• /
• 2003

The z-transform method is a basic mathematical tool in analyzing and designing digital signal processing systems for discrete input and output signals. There are may cases where the output signal is in the form of a discrete convolution sum of an input function and a designed digital processing algorithm function. It is well known that the z-transform of the convolution sum becomes the product of the two z-transforms of the input function and the digital processing function, whose proofs require the causality of the digital signal processing function in the almost all the available references. However, not all of the convolution sum functions are based on the causality. Many digital signal processing systems such as image processing system may depend not on the time information but on the spatial information, which has nothing to do with causality requirement. Thus, the application of the causality-based z-transform theorem on the convolution sum cannot be used without difficulty in this case. This paper proves the z-transform theorem on the discrete convolution sum without causality requirement, and make it possible for the theorem to be used in analysis and desing for any cases.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.417-421
• /
• 2006

ICAO defines performance requirements of navigation system such as accuracy, integrity, continuity and availability. The integrity is most significant performance requirement in aviation where safety of life is crucial. Many researches on this topic anticipate that GPS with SBAS or Galileo can meet APV requirements and GPS with GBAS or Galileo with GBAS will meet CAT II and III requirements. These performance expectations are based on global analysis. In this paper regional integrity analysis in Korea using various combinations of modernized GPS, Galileo and SBAS is given. The simulation results show that CAT I requirement can be met using modernized GPS and Galileo alone, however, CAT II and III are not met even augmenting SBAS because of VPL. A more efficient augmentation such as GBAS which can reduce VPL dramatically is required to meet CAT II and III in Korean region.

• 한국통신학회논문지
• /
• 제38C권3호
• /
• pp.247-253
• /
• 2013

본 논문에서는 선박 통합 게이트웨이를 이용하여 선박 내 기기를 하나의 네트워크로 연결하는 선박 네트워크(Ship Area Network)에 대하여 네트워크의 구조를 분석하고 모든 기기의 연결을 담당하는 선박 통합 게이트웨이의 망요소적 역할 및 필요 최소 성능에 대해 분석한다. 이를 위하여 선박 내 네트워크에 대한 참조망 구조 및 종단간 연결에 대해 분석하고 트래픽 모델 및 선박 네트워크의 요구사항을 분석하였다. 그리고 이를 바탕으로 선박 통합 네트워크 구조를 반영하는 네트워크 시뮬레이터를 설계하였다. 망요소에 대한 성능 평가 결과, 제안한 네트워크에서 통합 게이트웨이가 스위치로서 동작하고 약 30,000 packets/s 이상의 성능을 보유하였을 때, 선박 네트워크가 선박 내부의 트래픽을 안정적으로 전송하였음을 확인할 수 있었다.

• 시스템엔지니어링학술지
• /
• 제8권2호
• /
• pp.1-10
• /
• 2012

This paper aims to analyze the result of SE Process Implementation on Light Rail Transit(LRT) Project. Currently the Light Rail Transit Project of Korea applies SE to the intermediate phase, that is, E&M phase which is a manufacturing and designing procedure. More seriously, the application effect of SE is not remarkable because it applies to some specific engineering fields like RAMS and it depends on superficial consulting of foreign companies with low SE support capability and investment capital. This study points out that the "Requirement Analysis" and "System Alternative Review" has not been conducted from the initial phase (basic plan and basic design) of the LRT projects. Several projects indicate that the amount of investments for SE activities through the Korea LRT project is relatively very small in comparison with the global capital which is about 10% of total project budget. Furthermore, Korea LRT projects have very few SE professionals and weak SE organization with no government directions and guide book for the efficient implementation of SE for the LRT projects.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1357-1365
• /
• 2002

A robot hand is used to transport the glass substrate in TFT-LCD manufacturing process. Carbon/epoxy composite is one of the best materials for this kind of robot hand application, due to their lightweight, high stiffness, and good damping characteristics. Major requirement of the robot hand is given as allowable deflection under weight loading of glass substrate and robot hand itself. In this thesis, a carbon/epoxy robot hand was analyzed using finite element method and beam theory to determine the deflection of the hand under the loading that is equivalent to actual weight. Because natural frequency is one of the major interests in robot hand design for TFT-LCD manufacturing process, modal analysis is also conducted using finite element method and beam theory. A robot hand was manufactured, and actual deflection and natural frequency were measured to verify the analysis results and compliance to requirement. The test results showed good agreement with analysis results.