• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.7-10
• /
• 2005

Plant water deficiency during drought season causes physiological stress and can be a critical indicator of forest fire vulnerability. In this study, we attempt to analyze the spectral characteristics of water stressed vegetation by using the laboratory measurement on leaf samples and the canopy reflectance spectra extracted from satellite hyperspectral image data. Leaf-level reflectance spectra were measured by varying moisture content using a portable spectro-radiometer. Canopy reflectance spectra of sample forest stands of two primary species (pine and oak) located in central part of the Korean peninsula were extracted from EO-l Hyperion imaging spectrometer data obtained during the drought season in 2001 and the normal precipitation year in 2002. The preliminary analysis on the reflectance spectra shows that the spectral characteristics of leaf samples are not compatible with the ones obtained from canopy level. Although moisture content of vegetation can be influential to the radiant flux reflected from leaf-level, it may not be very straightforward to obtain the spectral characteristics that are directly related to the level of canopy moisture content. Canopy spectra form forest stands can be varied by structural variables (such as LAt, percent coverage, and biomass) other than canopy moisture content.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.48-53
• /
• 1984

Using the Duff and Noland's method, the annual ring growth patterns of the red pine in the natural stands were examined at two locations; Seocheon, Chungnam-do where the stand had been infested with the pine needle gall midge, Thecodiplosis japonensis, during the years from 1975 to 1978, and Hongsong, Chungnam-do where had been no incidence of the insect damage. The results obtained are as follows: 1) With the normal red pine of 13 year old, the growth pattern in the oblique sequence indicates that the annual growth rates are maximum at the few terminal internodes, and decrease gradually with the downward internodes. Such characteristic of the growth pattern is not clear in the horizontal sequence of annual rings. 2) The indications of the radial growth reduction of the pine tree due to the pine gall midge infestation could be examined with any of three series at the crown level internodes; horizontal, vertical and oblique series. For the basal internodes, however, the horizontal series appeared to be inadequate for the analysis of the damage impact because it seemed to be masked by various factors other than direct effects of the damage. 3) Of the three ways of radial growth analyses, oblique sequence seems to be the most usefull, especially for the detection of the impact on growth caused by incipient or light infestation.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.646-652
• /
• 2014

This study was carried out to test the possibility that tracheid length of red pine growing in Sokwang-ri in Uljin could be used as one of variables to estimate its wood properties. For the study, forest stands of V (500 m a.s.l.) and VIIII (900 m a.s.l.) age class plots were selected in the region, and three trees in each plot were investigated. The tracheid length was separately measured for early- and latewood. It took approximately 25 and 40 years for V and VIIII age class stands, respectively, until the length was stabilized. The lengths in latewood were 3.14 (V age class) and 3.30 (VIIII age class) mm, and in earlywood 2.98 (V age class) and 3.15 (VIIII age class) mm. The lengths in latewood therefore were longer than in earlywood and the lengths for VIIII age class were longer than for V age class. However, the ratio between their lengths in early- and latewood was the same as 0.96 in all age classes. It might be verified whether this ratio can be used as a variable to test the wood property according to provinces by comparing it with others.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.695-704
• /
• 2016

Physical and mechanical properties of Korean red pine wood grown in Anmyeon-do, Taean-gun, Chungcheongnam-do and Sogwang-ri, Uljin-gun, Gyeongsangbuk-do, Korea were measured and each relationships between them were analyzed. The ring width and latewood proportion along radial axis in Korean red pine at two-regions were measured by collecting the growth core of stands with age class V and IX. The ring width in Korean red pine at two-regions decreased with increasing cambium age. The average ring widths in age class V and IX in Anmyeon-do and Sogwang-ri were 2.865 mm, 1.705 mm, 4.764 mm, and 2.228 mm, respectively. The ring widths in Anmyeon-do were measured from 23% to 40% smaller than Sogwang-ri. The latewood proportion was negatively related with the ring width of Korean red pine at two-regions. The relationship between physical and mechanical properties of specimens for compressive and bending strength tests were analyzed with simple regression analysis. The relationship between latewood proportion and oven-dry density were positive and statistically significant. The relationship between latewood proportion and mechanical properties was slightly positive and not statistically significant, except the specimens for bending strength test of Anmyeon-do. The relationship between oven-dry density and mechanical properties was positive. It was just statistically significant in the specimens of Sogwang-ri. The compressive and bending strengths of Anmyeon-do and Sogwang-ri were 51.3 MPa, 80.5 MPa, 37.7 MPa, and 63.7 MPa, respectively. The strength difference between two-regions was determined to due to difference of ring width and latewood proportion by age class.

• Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.126-142
• /
• 2020

Background: Most of the Pinus densiflora forests, occupying the largest area, have been restored in South Korea since the 1970s. As young pioneer forests, the succession process is under way. Since the forests are distributed nationwide and are vulnerable to disturbances, the process may differ depending on the geography and/or site conditions. Therefore, we reviewed the direction, the seral communities, and the late-successional species of progressive and disturbance-driven succession nationwide in the cool-temperate zone through meta-analysis and empirical observations. Main text: As a result of a meta-analysis of the direct succession and vertical structure, we found that the P. densiflora forest is in a directionally progressive succession, changing to the broadleaved forest after forming a mixed forest with its overwhelming successor, Quercus species (particularly Q. mongolica and Q. serrata). In dry stands in a relative sense, the Quercus species was favored occupying over 80% of the abundance of the succeeding species. Therefore, in dry stands, it is presumed that Quercus-dominated stage would last for a long time due to the current dominance and long life span, and eventually, it settles as Quercus-broadleaved forest with a site change. Contrary to this, it is presumed that in mesic stands where Quercus species do not occur or have low abundance, the late-successional broadleaved species settle early to form a co-dominant forest with multiple species. Due to geographical limits, the species composition of the two late-successional forests is different. Disturbances such as insect pests and fire retrogressed vulnerable P. densiflora forest for a while. However, it was mostly restored to the Quercus forest and is expected to be incorporated in the pathway of the dry stand. Conclusions: We revealed the succession process of P. densiflora forests according to geography and moisture and found that stand moisture had a decisive effect on the species and abundance of the successor. Although the P. densiflora forest is undergoing structural changes, the forest is still young; so within a few decades, physiognomy is not likely to change. Therefore, the decrease in the forest area may be due to other causes such as disturbances and forest conversion rather than due to succession.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.729-734
• /
• 2006

This paper aimed to suggest decision-making method for forest management planning using integer programming. Thus, the study examined 85 stands consisting of Korean pine, Japanese larch and oak stands-all of which were at the most suitable time for tending, selection thinning, commercial thinning and final cutting-in the experimental forest of Kangwon National University. The forest management model comprised one objective function, maximizing harvest volume in each stand according to tree species and the kinds of practices, and seven constraints: frequency and stands of practices, minimum and maximum yields, even yields, maximum production, and decision-making varialbes. Besides, the entire period intended by the study was 10 years, divided into 5 management periods. In conclusion, the forest management planning model using integer programming proved that among 85 stands, forest practices were conducted over 68 stands (202.8 ha), producing the total harveted volume of $20,000m^3$, while the rest was reserved. This case study could help make decisions on whether and when the forest practices and harvests could be done in a specific condition.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.400-412
• /
• 2023

In this study, the biogeochemistry management (BGC-MAN) model was applied to North and South Korea pine and oak forest stands to evaluate the Net Primary Productivity (NPP), an indicator of forest ecosystem productivity. For meteorological information, historical records and East Asian climate scenario data of Shared Socioeconomic Pathways (SSPs) were used. For vegetation information, pine (Pinus densiflora) and oak(Quercus spp.) forest stands were selected at the Gwangneung and Seolmacheon in South Korea and Sariwon, Sohung, Haeju, Jongju, and Wonsan, which are known to have tree nurseries in North Korea. Among the biophysical information, we used the elevation model for topographic data such as longitude, altitude, and slope direction, and the global soil database for soil data. For management factors, we considered the destruction of forests in North and South Korea due to the Korean War in 1950 and the subsequent reforestation process. The overall mean value of simulated NPP from 1991 to 2100 was 5.17 Mg C ha^-1, with a range of 3.30-8.19 Mg C ha^-1. In addition, increased variability in climate scenarios resulted in variations in forest productivity, with a notable decline in the growth of pine forests. The applicability of the BGC-MAN model to the Korean Peninsula was examined at a time when the ecosystem process-based models were becoming increasingly important due to climate change. In this study, the data on the effects of climate change disturbances on forest ecosystems that was analyzed was limited; therefore, future modeling methods should be improved to simulate more precise ecosystem changes across the Korean Peninsula through process-based models.

• Journal of Korean Society of Forest Science
• /
• v.96 no.4
• /
• pp.438-447
• /
• 2007

The purpose of this study was to understand the ecosystem structure and function and soil water changes in Tricholoma matsutake producing pine stands. The investigated stands were pine forest in Sogrisan National Park in Chungbuk-do of Korea. For the purpose we investigated main vegetation, leaf area index(LAI) as ecosystem structural factors and measured photosynthesis, transpiration, xylem water potential, and soil water changes as ecosystem functional factors. Vertical vegetation structure of the site was composed of Pinus densiflora as a overstory species, Quercus mongolica as midstory, Rhododendron mucronulatum, R. schlippenbachii and Fraxinus sieboldiana as understory ones. In the stands LAI was 3.8 during June to September, 2.6 in October and 2.1 during November to April. Photosyntheses of the trees were 6.0 to $7.0{\mu}mol\;CO_2/m^2/s$ in August, and for P. densiflora about $4.0{\mu}mol\;CO_2/m^2/s$ and for Q. mongolica $2.0{\mu}mol\;CO_2/m^2/s$ in mid October. However, R. mucronulatum stopped fixing $CO_2$ and F. sieboldiana shed off the leaves already in mid October. Transpirations were 2.5 to $3.5mmol\;H_2O/m^2/s$ in late August and about $1.0mmol/H_2O/m^2/s$ in mid October. Plant water potentials were -10 to -22 bars for P. densiflora and -5 to -12 bars for the other woody species. The lowest potentials was in late August and highest in late October. Soil water in the stand was closely related to topography. Soil water contents were 7 to 11% at the ridge, 8 to 15% at the hillside and 11 to 19% at the base. Soil temperatures were 0.2 to $0.4^{\circ}C$ higher in T. matustuake colony than noncolony. Mid September soil temperature decreased to $19^{\circ}C$ at which T. matsutake forms primordia. In T. matsutake colony soil moisture was 0.5 to 2.0% lower due to metabolism for consuming water. We suggest that the complicate relationships between ecosystem structure and function in Tricholoma matsutake producing pine stand need to be further investigated.