• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.194-201
• /
• 1995

In order to make clear the resistance of bag nets, the resistance R of bag nets with wall area S designed in pyramid shape was measured in a circulating water tank with control of flow velocity v and the coefficient k in $R=kSv^2$ was investigated. The coefficient k showed no change In the nets designed in regular pyramid shape when their mouths were attached alternately to the circular and square frames, because their shape in water became a circular cone in the circular frame and equal to the cone with the exception of the vicinity of frame in the square one. On the other hand, a net designed in right pyramid shape and then attached to a rectangular frame showed an elliptic cone with the exception of the vicinity of frame in water, but produced no significant difference in value of k in comparison with that making a circular cone in water. In the nets making a circular cone in water, k was higher in nets with larger d/l, ratio of diameter d to length I of bars, and decreased as the ratio S/S_m$ of S to the area $S_m$ of net mouth was increased or as the attack angle 9 of net to the water flow was decreased. But the value of ks15m was almost constant in the region of S/S_m=1-4$ or $\theta=15-90^{\circ}$ and in creased linearly in S/S_m>4 or in $\theta<15^{\circ}$ However, these variation of k could be summarized by the equation obtained in the previous paper. That is, the coefficient $k(kg\;\cdot\;sec^2/m^4)$ of bag nets was expressed as $$k=160R_e\;^{-01}(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$ for the condition of $R_e<100$ and $$k=100(\frac{S_n}{S_m})^{1.2}\;(\frac{S_m}{S})^{1.6}$$ for $R_e\geq100$, where $S_n$ is their total area projected to the plane perpendicular to the water flow and $R_e$ the Reynolds' number on which the representative size was taken by the value of $\lambda$ defined as $$\lambda={\frac{\pi d^2}{21\;sin\;2\varphi}$$ where If is the angle between two adjacent bars, d the diameter of bars, and 21 the mesh size. Conclusively, it is clarified that the coefficient k obtained in the previous paper agrees with the experimental results for bag nets.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.114-120
• /
• 2008

In the vision-based recovery phase, a terminal guidance for the blended-wing UAV requires visual information of high accuracy. This paper presents the light source target design and detection algorithm for vision-based UAV recovery. We propose a recovery target design with red and green LEDs. This frame provides the relative position between the target and the UAV. The target detection algorithm includes HSV-based segmentation, morphology, and blob processing. These techniques are employed to give efficient detection results in day and night net recovery operations. The performance of the proposed target design and detection algorithm are evaluated through ground-based experiments.

• Tunnel and Underground Space
• /
• v.28 no.3
• /
• pp.258-276
• /
• 2018

The accurate and quantitative ground information on the hydraulic conductivity characteristics of rock mass is one of the key factors for evaluation of the hydro-geological behaviour of rock mass around an excavated opening under high water pressure. For tunnel and rock structures in seabed, where the sea acts as an infinite source of water, its importance become greater with increasing construction depth below sea level. In this study, to improve the problems related with poor system configuration and incorrect data acquisition of previous hydraulic packer testing equipment, we newly developed an integrated main frame and 30 bar level waterproof downhole sonde apparatus, which were optimized for deep hydraulic packer test in seabed rock mass. Integration of individual test equipment into one frame allows safe and efficient field testing work on a narrow offshore drilling platform. For the integrated type main frame, it is possible to make precise stepwise control of downhole net injection pressure at intervals of $2.0kg_f/cm^2$ or less with dual hydraulic oil volume controller. To ensure the system performance and the operational stability of the prototype mainframe and downhole sonde apparatus, the field feasibility tests were completed in two research boreholes, and using the developed apparatus, the REV(Representative Elementary Volume) scale deep hydraulic packer tests were successfully carried out at a borehole located in the basalt region, Jeju. In this paper, the characteristics of the new testing apparatus are briefly introduced and also some results from the laboratory and in-situ performance tests are shown.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.3
• /
• pp.913-924
• /
• 2008

The purpose of this study is to categorize Program Provider(PP) outside and inside of the country systematically under the notion that the categorization system of the strategy group for PP is not properly organized. In this paper, not only Commercial PP but also Public PP and Homeshopping PP are also included and PP Company is consistently classified and reorganized as a strategy group in the level of contents, because existing positive study does not entirely deliberate over the characteristics of the PP contents industry inside the country. According to this frame, it is classified into 6 contents group-oriented PP strategy groups using 14 variables including vertical integration, horizontal integration, the sales, advertising revenue, license revenue, total net revenue, the number of employees and history.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.178-184
• /
• 2000

To obtain high quality component with thixoforming process, it is important that the homegeneous distribution of solid particles without liquid segregation. In closed-die semi-solid forging process, liquid segregation is strongly affected by injection velocity than any other process variables because the material has to travel relatively long distance to fill the cavity through a narrow gate before solidification begins. The optimal injection velocity and die temperature were investigated to fabricate near-net-shape compressor component called Al frame.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.3
• /
• pp.309-315
• /
• 1995

This paper describes a monitoring system for fish farm formation effect based on personal computer by using an image processing technique. This method is based on image processing technique incorporating concept of window and threshold processing to track the target object and to distinguish it from background. The image processing program runs in the veal time so that all program modules are able to process multi-task. The effectiveness is evaluated through the comparative study on the motion of lantern net for the scallop culturing by wave action in an experimental wave tank.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.3 no.2
• /
• pp.18-31
• /
• 1985

The object of this study is to analize the trilateration adjustment by FEM. FEM is a numerical method for analysis dealing with problems of displacement and variation about the object. Since a plane trilateration net can be likend to a plan structural frame work in stress analysis, the technic of FEM can be used for trilateration adjustment Thus, this study applied FEM and Condition Equation Method to a trilateration adjustment, and investigated precision and characteristics of them.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1168-1172
• /
• 2018

This study went beyond making an indicator simply based on theoretical arguments, and explored a wide spectrum of different types of perceptions about energy safety to make a concept of energy safety for the Korean society. The energy safety schemata of people can be divided into three types. Type1 is concern about multi-level risks-responsibility-centric, type2 is concern about security and personal burden-expertise-centric, and type3 is concern about health and personal burden-responsibility-centric. Questions were designed on the basis of the characteristics, differences and commonalities of the three types of perceptions, explored through the Q methodology, and Koreans' perception of nuclear safety was examined. Based on the results of this research the following components of trust in nuclear safety were derived, risk perception, responsibility, honesty, expertise and procedural justification. The items for specifically evaluating them were developed, and factor analysis was conducted, and as a result, the validity of each item was proven. The components of the nuclear safety trust indicator do not exist independently, but influence each other continuously through interactions. For this reason, rather than focusing on any one of them, laws and systems must be improved first so that they can move together in one big frame.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.75-86
• /
• 1996

In this paper, we propose a new fuzzy-neural network control scheme for the speed and azimuth control of a mobile robot. The proposed control scheme uses a gaussian function as a unit function in the fuzzy-neural network, and back propagation algorithm to train the fuzzy-neural network controller in the frame-work of the specialized learning architecture. It is proposed a learning controller consisting of two fuzzy-neural networks based on independent reasoning and a connection net woth fixed weights to simply the fuzzy-neural network. The effectiveness of the proposed controller is illustrated by performing the computer simulation for a circular trajectory tracking of a mobile robot driven by two independent wheels.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1333-1335
• /
• 2022

최근 딥러닝은 다양한 컴퓨터 비전에 적용되어 높은 성능을 제공하고 있고 이에 따라 중간 프레임을 생성하는 비디오 프레임 보간 기법에도 딥러닝이 적용되고 있다. 많은 딥러닝 기반의 비디오 프레임 보간 기법은 크게 옵티컬 플로우를 추정하는 플로우 추정 네트워크와 합성 네트워크로 구성되며 본 논문에서는 합성 네트워크 부분의 성능향상을 위한 네트워크에 대하여 다룬다. 합성 네트워크에 주로 사용되는 UNet 구조와 GridNet 구조의 장단점과 네트워크에 따른 보간 결과의 차이에 대해서 알아보고 영상 복원에서 제안된 NAFNet 을 비디오 보간 기법에 맞게 변형시켜 합성 네트워크에 적용한 보간 결과의 차이를 보였다. 실험결과는 기존 네트워크 대비 Vimeo90K 데이터셋에 대하여 PSNR 값이 0.63dB 개선됨을 보여준다.